diff mbox

[2/4] ARM: Kirkwood: add modes-map property to ns2-leds nodes

Message ID 1425480739-2373-3-git-send-email-simon.guinot@sequanux.org (mailing list archive)
State New, archived
Headers show

Commit Message

Simon Guinot March 4, 2015, 2:52 p.m. UTC 
From: Vincent Donnefort <vdonnefort@gmail.com>

Since the LED modes mapping is no longer hardcoded inside the leds-ns2
driver, then it must be provided through the modes-map property in the
ns2-leds nodes.

Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>
---
 arch/arm/boot/dts/kirkwood-d2net.dts   | 5 +++++
 arch/arm/boot/dts/kirkwood-is2.dts     | 5 +++++
 arch/arm/boot/dts/kirkwood-ns2.dts     | 5 +++++
 arch/arm/boot/dts/kirkwood-ns2max.dts  | 5 +++++
 arch/arm/boot/dts/kirkwood-ns2mini.dts | 5 +++++
 5 files changed, 25 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/kirkwood-d2net.dts b/arch/arm/boot/dts/kirkwood-d2net.dts
index 6b7856025001..e1c25c35e9ce 100644
--- a/arch/arm/boot/dts/kirkwood-d2net.dts
+++ b/arch/arm/boot/dts/kirkwood-d2net.dts
@@ -10,6 +10,7 @@ 
 
 /dts-v1/;
 
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-netxbig.dtsi"
 
 / {
@@ -28,6 +29,10 @@ 
 			label = "d2net_v2:blue:sata";
 			slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 			cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts
index da674bbd49a8..4121674abd1c 100644
--- a/arch/arm/boot/dts/kirkwood-is2.dts
+++ b/arch/arm/boot/dts/kirkwood-is2.dts
@@ -1,5 +1,6 @@ 
 /dts-v1/;
 
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-ns2-common.dtsi"
 
 / {
@@ -27,6 +28,10 @@ 
 			label = "ns2:blue:sata";
 			slow-gpio = <&gpio0 29 0>;
 			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts
index 53368d1022cc..190189d235e6 100644
--- a/arch/arm/boot/dts/kirkwood-ns2.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2.dts
@@ -1,5 +1,6 @@ 
 /dts-v1/;
 
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-ns2-common.dtsi"
 
 / {
@@ -27,6 +28,10 @@ 
 			label = "ns2:blue:sata";
 			slow-gpio = <&gpio0 29 0>;
 			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts
index 72c78d0b1116..55cc41d9c80c 100644
--- a/arch/arm/boot/dts/kirkwood-ns2max.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2max.dts
@@ -1,5 +1,6 @@ 
 /dts-v1/;
 
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-ns2-common.dtsi"
 
 / {
@@ -46,6 +47,10 @@ 
 			label = "ns2:blue:sata";
 			slow-gpio = <&gpio0 29 0>;
 			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts
index c441bf62c09f..9935f3ec29b4 100644
--- a/arch/arm/boot/dts/kirkwood-ns2mini.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts
@@ -1,5 +1,6 @@ 
 /dts-v1/;
 
+#include <dt-bindings/leds/leds-ns2.h>
 #include "kirkwood-ns2-common.dtsi"
 
 / {
@@ -47,6 +48,10 @@ 
 			label = "ns2:blue:sata";
 			slow-gpio = <&gpio0 29 0>;
 			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
 		};
 	};
 };