diff mbox

[v5,3/8] pinctrl: cygnus: add initial IOMUX driver support

Message ID 1425515756-321-4-git-send-email-rjui@broadcom.com (mailing list archive)
State New, archived
Headers show

Commit Message

Ray Jui March 5, 2015, 12:35 a.m. UTC
This adds the initial driver support for the Broadcom Cygnus IOMUX
controller. The Cygnus IOMUX controller supports group based mux
configuration but allows certain pins to be muxed to GPIO individually

Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Tested-by: Dmitry Torokhov <dtor@chromium.org>
---
 drivers/pinctrl/bcm/Kconfig              |   13 +
 drivers/pinctrl/bcm/Makefile             |    5 +-
 drivers/pinctrl/bcm/pinctrl-cygnus-mux.c | 1022 ++++++++++++++++++++++++++++++
 3 files changed, 1038 insertions(+), 2 deletions(-)
 create mode 100644 drivers/pinctrl/bcm/pinctrl-cygnus-mux.c

Comments

Paul Bolle March 5, 2015, 8:03 a.m. UTC | #1
On Wed, 2015-03-04 at 16:35 -0800, Ray Jui wrote:
> diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
> index bc6d048..eb13201 100644
> --- a/drivers/pinctrl/bcm/Kconfig
> +++ b/drivers/pinctrl/bcm/Kconfig
> @@ -19,3 +19,16 @@ config PINCTRL_BCM2835
>  	bool
>  	select PINMUX
>  	select PINCONF
> +
> +config PINCTRL_CYGNUS_MUX
> +	bool "Broadcom Cygnus IOMUX driver"

bool type.

> +	depends on (ARCH_BCM_CYGNUS || COMPILE_TEST)
> +	select PINMUX
> +	select GENERIC_PINCONF
> +	default ARCH_BCM_CYGNUS
> +	help
> +	  Say yes here to enable the Broadcom Cygnus IOMUX driver.
> +
> +	  The Broadcom Cygnus IOMUX driver supports group based IOMUX
> +	  configuration, with the exception that certain individual pins
> +	  can be overrided to GPIO function
> diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
> index 7ba80a3..bb6beb6 100644
> --- a/drivers/pinctrl/bcm/Makefile
> +++ b/drivers/pinctrl/bcm/Makefile
> @@ -1,4 +1,5 @@
>  # Broadcom pinctrl support
>  
> -obj-$(CONFIG_PINCTRL_BCM281XX)	+= pinctrl-bcm281xx.o
> -obj-$(CONFIG_PINCTRL_BCM2835)	+= pinctrl-bcm2835.o
> +obj-$(CONFIG_PINCTRL_BCM281XX)		+= pinctrl-bcm281xx.o
> +obj-$(CONFIG_PINCTRL_BCM2835)		+= pinctrl-bcm2835.o
> +obj-$(CONFIG_PINCTRL_CYGNUS_MUX)	+= pinctrl-cygnus-mux.o

So pinctrl-cygnus-mux.o will be built-in (or not built, of course).

> diff --git a/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c b/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c
> new file mode 100644
> index 0000000..f9a9283
> --- /dev/null
> +++ b/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c
> @@ -0,0 +1,1022 @@
>[...]
> +MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>");
> +MODULE_DESCRIPTION("Broadcom Cygnus IOMUX driver");
> +MODULE_LICENSE("GPL v2");

These three macros will be preprocessed away. (And I guess you could
also drop the linux/module.h include, but I haven't actually tested that
guess.)


Paul Bolle
Linus Walleij March 9, 2015, 4:26 p.m. UTC | #2
On Thu, Mar 5, 2015 at 1:35 AM, Ray Jui <rjui@broadcom.com> wrote:

> This adds the initial driver support for the Broadcom Cygnus IOMUX
> controller. The Cygnus IOMUX controller supports group based mux
> configuration but allows certain pins to be muxed to GPIO individually
>
> Signed-off-by: Ray Jui <rjui@broadcom.com>
> Reviewed-by: Scott Branden <sbranden@broadcom.com>
> Tested-by: Dmitry Torokhov <dtor@chromium.org>

Nice and clean.
Patch applied.

Yours,
Linus Walleij
Linus Walleij March 9, 2015, 4:28 p.m. UTC | #3
On Thu, Mar 5, 2015 at 9:03 AM, Paul Bolle <pebolle@tiscali.nl> wrote:
>>[...]
>> +MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>");
>> +MODULE_DESCRIPTION("Broadcom Cygnus IOMUX driver");
>> +MODULE_LICENSE("GPL v2");
>
> These three macros will be preprocessed away. (And I guess you could
> also drop the linux/module.h include, but I haven't actually tested that
> guess.)

I think you're right. Or I fear you're right.

But this problem is present in so many drivers that a generic
fixup needs to be done with a script and across an entire subsystem
at once, and besides I'm not sure of these macros disturb so much.

They are documentation in a sense, albeit a kind of documentation
we used before we had git to record the actual authors of the
code.

Yours,
Linus Walleij
Paul Bolle March 9, 2015, 6:40 p.m. UTC | #4
Linus Walleij schreef op ma 09-03-2015 om 17:28 [+0100]:
> I think you're right. Or I fear you're right.
> 
> But this problem is present in so many drivers that a generic
> fixup needs to be done with a script and across an entire subsystem
> at once,

Why don't we start with checking for similar cases during review, like
I'm now doing for only a week or two?

>  and besides I'm not sure of these macros disturb so much.

I think they're confusing at best. Ie, when reading the code and the
corresponding Kconfig file one has to wonder: should the Kconfig symbol
actually be tristate or should it stay bool but did someone forget to
delete the module-specific code?

> They are documentation in a sense, albeit a kind of documentation
> we used before we had git to record the actual authors of the
> code.

They're useful, mostly, for module utilities. Outside that scope they
add information that thousands of files (that can also only be built-in
but do not have these macros) do not have and, apparently, do not need.

Thanks,


Paul Bolle
Ray Jui March 9, 2015, 7 p.m. UTC | #5
On 3/9/2015 11:40 AM, Paul Bolle wrote:
> Linus Walleij schreef op ma 09-03-2015 om 17:28 [+0100]:
>> I think you're right. Or I fear you're right.
>>
>> But this problem is present in so many drivers that a generic
>> fixup needs to be done with a script and across an entire subsystem
>> at once,
> 
> Why don't we start with checking for similar cases during review, like
> I'm now doing for only a week or two?
> 
>>  and besides I'm not sure of these macros disturb so much.
> 
> I think they're confusing at best. Ie, when reading the code and the
> corresponding Kconfig file one has to wonder: should the Kconfig symbol
> actually be tristate or should it stay bool but did someone forget to
> delete the module-specific code?
> 
>> They are documentation in a sense, albeit a kind of documentation
>> we used before we had git to record the actual authors of the
>> code.
> 
> They're useful, mostly, for module utilities. Outside that scope they
> add information that thousands of files (that can also only be built-in
> but do not have these macros) do not have and, apparently, do not need.

I think it depends on how you see it. Based on this logic, then one can
also argue comments in the code will be pre-processed away and are not
needed. They at least serve the same documentation purpose in a way. So
far I haven't seen other people complaining that having these module
based macros in the driver are confusing when the Kconfig has a bool.

Ray

> 
> Thanks,
> 
> 
> Paul Bolle
>
Paul Bolle March 9, 2015, 7:30 p.m. UTC | #6
Ray Jui schreef op ma 09-03-2015 om 12:00 [-0700]:
> I think it depends on how you see it. Based on this logic, then one can
> also argue comments in the code will be pre-processed away and are not
> needed. They at least serve the same documentation purpose in a way.

So why not make them comments? And even that might not be needed:
- MODULE_LICENSE() only summarizes, in just a few words, what takes a
few paragraphs in the customary comment at the top of a file;
- MODULE_DESCRIPTION() repeats what, in general, has been said in the
Kconfig entry for that driver and in the git commit explanation;
- and I'm not sure what the benefit is of MODULE_AUTHOR() in the first
place (even for actually modular drivers).

> So
> far I haven't seen other people complaining that having these module
> based macros in the driver are confusing when the Kconfig has a bool.

Perhaps that's just because review doesn't spot all issues. Patch
bandwidth exceeding review bandwidth and all that.

Anyhow, right now there's another thread discussing the questions my
review comments raise. Eg, "The Kconfig symbol is bool, there is module
related code in the driver, why note make the Kconfig symbol tristate
(and the driver modular)?". I think that is one of the questions mixing
built-in and modular semantics raises.


Paul Bolle
Ray Jui March 9, 2015, 7:40 p.m. UTC | #7
On 3/9/2015 12:30 PM, Paul Bolle wrote:
> Ray Jui schreef op ma 09-03-2015 om 12:00 [-0700]:
>> I think it depends on how you see it. Based on this logic, then one can
>> also argue comments in the code will be pre-processed away and are not
>> needed. They at least serve the same documentation purpose in a way.
> 
> So why not make them comments? And even that might not be needed:
> - MODULE_LICENSE() only summarizes, in just a few words, what takes a
> few paragraphs in the customary comment at the top of a file;
> - MODULE_DESCRIPTION() repeats what, in general, has been said in the
> Kconfig entry for that driver and in the git commit explanation;
> - and I'm not sure what the benefit is of MODULE_AUTHOR() in the first
> place (even for actually modular drivers).
> 
>> So
>> far I haven't seen other people complaining that having these module
>> based macros in the driver are confusing when the Kconfig has a bool.
> 
> Perhaps that's just because review doesn't spot all issues. Patch
> bandwidth exceeding review bandwidth and all that.

I don't see this as an "issue" to be quite honest. By saying that, I at
least agree with you that these are not information that's mandatory to
be in the driver given what we already have. MODULE_LICENSE is covered
by license header. MODULE_DESCRIPTION is covered by descriptions in
Kconfig. MODULE_AUTHOR is much less important than what's in the
MAINTAINERS list.

Since I have to submit a new patch series to address the "ngpios" issue
that Linus mentioned in the other email, I don't mind removing all these
MODULE_* macros in the driver all together.

> 
> Anyhow, right now there's another thread discussing the questions my
> review comments raise. Eg, "The Kconfig symbol is bool, there is module
> related code in the driver, why note make the Kconfig symbol tristate
> (and the driver modular)?". I think that is one of the questions mixing
> built-in and modular semantics raises.
> 
> 
> Paul Bolle
> 

Thanks,

Ray
Paul Bolle March 9, 2015, 7:53 p.m. UTC | #8
Ray Jui schreef op ma 09-03-2015 om 12:40 [-0700]:
> I don't see this as an "issue" to be quite honest.

(Off topic: is issue a, well, strong word? To my (non-English) mind it's
rather neutral, carrying by itself less urgency than, say, problem. If
I'm wrong I might have confused quite a few people by using it quite
often. And that would be a real issue!)

> By saying that, I at
> least agree with you that these are not information that's mandatory to
> be in the driver given what we already have. MODULE_LICENSE is covered
> by license header. MODULE_DESCRIPTION is covered by descriptions in
> Kconfig. MODULE_AUTHOR is much less important than what's in the
> MAINTAINERS list.
> 
> Since I have to submit a new patch series to address the "ngpios" issue
> that Linus mentioned in the other email, I don't mind removing all these
> MODULE_* macros in the driver all together.

I see.

Thanks,


Paul Bolle
diff mbox

Patch

diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index bc6d048..eb13201 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -19,3 +19,16 @@  config PINCTRL_BCM2835
 	bool
 	select PINMUX
 	select PINCONF
+
+config PINCTRL_CYGNUS_MUX
+	bool "Broadcom Cygnus IOMUX driver"
+	depends on (ARCH_BCM_CYGNUS || COMPILE_TEST)
+	select PINMUX
+	select GENERIC_PINCONF
+	default ARCH_BCM_CYGNUS
+	help
+	  Say yes here to enable the Broadcom Cygnus IOMUX driver.
+
+	  The Broadcom Cygnus IOMUX driver supports group based IOMUX
+	  configuration, with the exception that certain individual pins
+	  can be overrided to GPIO function
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index 7ba80a3..bb6beb6 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -1,4 +1,5 @@ 
 # Broadcom pinctrl support
 
-obj-$(CONFIG_PINCTRL_BCM281XX)	+= pinctrl-bcm281xx.o
-obj-$(CONFIG_PINCTRL_BCM2835)	+= pinctrl-bcm2835.o
+obj-$(CONFIG_PINCTRL_BCM281XX)		+= pinctrl-bcm281xx.o
+obj-$(CONFIG_PINCTRL_BCM2835)		+= pinctrl-bcm2835.o
+obj-$(CONFIG_PINCTRL_CYGNUS_MUX)	+= pinctrl-cygnus-mux.o
diff --git a/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c b/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c
new file mode 100644
index 0000000..f9a9283
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c
@@ -0,0 +1,1022 @@ 
+/* Copyright (C) 2014-2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This file contains the Cygnus IOMUX driver that supports group based PINMUX
+ * configuration. Although PINMUX configuration is mainly group based, the
+ * Cygnus IOMUX controller allows certain pins to be individually muxed to GPIO
+ * function, and therefore be controlled by the Cygnus ASIU GPIO controller
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include "../core.h"
+#include "../pinctrl-utils.h"
+
+#define CYGNUS_NUM_IOMUX_REGS     8
+#define CYGNUS_NUM_MUX_PER_REG    8
+#define CYGNUS_NUM_IOMUX          (CYGNUS_NUM_IOMUX_REGS * \
+				   CYGNUS_NUM_MUX_PER_REG)
+
+/*
+ * Cygnus IOMUX register description
+ *
+ * @offset: register offset for mux configuration of a group
+ * @shift: bit shift for mux configuration of a group
+ * @alt: alternate function to set to
+ */
+struct cygnus_mux {
+	unsigned int offset;
+	unsigned int shift;
+	unsigned int alt;
+};
+
+/*
+ * Keep track of Cygnus IOMUX configuration and prevent double configuration
+ *
+ * @cygnus_mux: Cygnus IOMUX register description
+ * @is_configured: flag to indicate whether a mux setting has already been
+ * configured
+ */
+struct cygnus_mux_log {
+	struct cygnus_mux mux;
+	bool is_configured;
+};
+
+/*
+ * Group based IOMUX configuration
+ *
+ * @name: name of the group
+ * @pins: array of pins used by this group
+ * @num_pins: total number of pins used by this group
+ * @mux: Cygnus group based IOMUX configuration
+ */
+struct cygnus_pin_group {
+	const char *name;
+	const unsigned *pins;
+	unsigned num_pins;
+	struct cygnus_mux mux;
+};
+
+/*
+ * Cygnus mux function and supported pin groups
+ *
+ * @name: name of the function
+ * @groups: array of groups that can be supported by this function
+ * @num_groups: total number of groups that can be supported by this function
+ */
+struct cygnus_pin_function {
+	const char *name;
+	const char * const *groups;
+	unsigned num_groups;
+};
+
+/*
+ * Cygnus IOMUX pinctrl core
+ *
+ * @pctl: pointer to pinctrl_dev
+ * @dev: pointer to device
+ * @base0: first I/O register base of the Cygnus IOMUX controller
+ * @base1: second I/O register base
+ * @groups: pointer to array of groups
+ * @num_groups: total number of groups
+ * @functions: pointer to array of functions
+ * @num_functions: total number of functions
+ * @mux_log: pointer to the array of mux logs
+ * @lock: lock to protect register access
+ */
+struct cygnus_pinctrl {
+	struct pinctrl_dev *pctl;
+	struct device *dev;
+	void __iomem *base0;
+	void __iomem *base1;
+
+	const struct cygnus_pin_group *groups;
+	unsigned num_groups;
+
+	const struct cygnus_pin_function *functions;
+	unsigned num_functions;
+
+	struct cygnus_mux_log *mux_log;
+
+	spinlock_t lock;
+};
+
+/*
+ * Certain pins can be individually muxed to GPIO function
+ *
+ * @is_supported: flag to indicate GPIO mux is supported for this pin
+ * @offset: register offset for GPIO mux override of a pin
+ * @shift: bit shift for GPIO mux override of a pin
+ */
+struct cygnus_gpio_mux {
+	int is_supported;
+	unsigned int offset;
+	unsigned int shift;
+};
+
+/*
+ * Description of a pin in Cygnus
+ *
+ * @pin: pin number
+ * @name: pin name
+ * @gpio_mux: GPIO override related information
+ */
+struct cygnus_pin {
+	unsigned pin;
+	char *name;
+	struct cygnus_gpio_mux gpio_mux;
+};
+
+#define CYGNUS_PIN_DESC(p, n, i, o, s)	\
+{					\
+	.pin = p,			\
+	.name = n,			\
+	.gpio_mux = {			\
+		.is_supported = i,	\
+		.offset = o,		\
+		.shift = s,		\
+	},				\
+}
+
+/*
+ * List of pins in Cygnus
+ */
+static struct cygnus_pin cygnus_pins[] = {
+	CYGNUS_PIN_DESC(0, "ext_device_reset_n", 0, 0, 0),
+	CYGNUS_PIN_DESC(1, "chip_mode0", 0, 0, 0),
+	CYGNUS_PIN_DESC(2, "chip_mode1", 0, 0, 0),
+	CYGNUS_PIN_DESC(3, "chip_mode2", 0, 0, 0),
+	CYGNUS_PIN_DESC(4, "chip_mode3", 0, 0, 0),
+	CYGNUS_PIN_DESC(5, "chip_mode4", 0, 0, 0),
+	CYGNUS_PIN_DESC(6, "bsc0_scl", 0, 0, 0),
+	CYGNUS_PIN_DESC(7, "bsc0_sda", 0, 0, 0),
+	CYGNUS_PIN_DESC(8, "bsc1_scl", 0, 0, 0),
+	CYGNUS_PIN_DESC(9, "bsc1_sda", 0, 0, 0),
+	CYGNUS_PIN_DESC(10, "d1w_dq", 1, 0x28, 0),
+	CYGNUS_PIN_DESC(11, "d1wowstz_l", 1, 0x4, 28),
+	CYGNUS_PIN_DESC(12, "gpio0", 0, 0, 0),
+	CYGNUS_PIN_DESC(13, "gpio1", 0, 0, 0),
+	CYGNUS_PIN_DESC(14, "gpio2", 0, 0, 0),
+	CYGNUS_PIN_DESC(15, "gpio3", 0, 0, 0),
+	CYGNUS_PIN_DESC(16, "gpio4", 0, 0, 0),
+	CYGNUS_PIN_DESC(17, "gpio5", 0, 0, 0),
+	CYGNUS_PIN_DESC(18, "gpio6", 0, 0, 0),
+	CYGNUS_PIN_DESC(19, "gpio7", 0, 0, 0),
+	CYGNUS_PIN_DESC(20, "gpio8", 0, 0, 0),
+	CYGNUS_PIN_DESC(21, "gpio9", 0, 0, 0),
+	CYGNUS_PIN_DESC(22, "gpio10", 0, 0, 0),
+	CYGNUS_PIN_DESC(23, "gpio11", 0, 0, 0),
+	CYGNUS_PIN_DESC(24, "gpio12", 0, 0, 0),
+	CYGNUS_PIN_DESC(25, "gpio13", 0, 0, 0),
+	CYGNUS_PIN_DESC(26, "gpio14", 0, 0, 0),
+	CYGNUS_PIN_DESC(27, "gpio15", 0, 0, 0),
+	CYGNUS_PIN_DESC(28, "gpio16", 0, 0, 0),
+	CYGNUS_PIN_DESC(29, "gpio17", 0, 0, 0),
+	CYGNUS_PIN_DESC(30, "gpio18", 0, 0, 0),
+	CYGNUS_PIN_DESC(31, "gpio19", 0, 0, 0),
+	CYGNUS_PIN_DESC(32, "gpio20", 0, 0, 0),
+	CYGNUS_PIN_DESC(33, "gpio21", 0, 0, 0),
+	CYGNUS_PIN_DESC(34, "gpio22", 0, 0, 0),
+	CYGNUS_PIN_DESC(35, "gpio23", 0, 0, 0),
+	CYGNUS_PIN_DESC(36, "mdc", 0, 0, 0),
+	CYGNUS_PIN_DESC(37, "mdio", 0, 0, 0),
+	CYGNUS_PIN_DESC(38, "pwm0", 1, 0x10, 30),
+	CYGNUS_PIN_DESC(39, "pwm1", 1, 0x10, 28),
+	CYGNUS_PIN_DESC(40, "pwm2", 1, 0x10, 26),
+	CYGNUS_PIN_DESC(41, "pwm3", 1, 0x10, 24),
+	CYGNUS_PIN_DESC(42, "sc0_clk", 1, 0x10, 22),
+	CYGNUS_PIN_DESC(43, "sc0_cmdvcc_l", 1, 0x10, 20),
+	CYGNUS_PIN_DESC(44, "sc0_detect", 1, 0x10, 18),
+	CYGNUS_PIN_DESC(45, "sc0_fcb", 1, 0x10, 16),
+	CYGNUS_PIN_DESC(46, "sc0_io", 1, 0x10, 14),
+	CYGNUS_PIN_DESC(47, "sc0_rst_l", 1, 0x10, 12),
+	CYGNUS_PIN_DESC(48, "sc1_clk", 1, 0x10, 10),
+	CYGNUS_PIN_DESC(49, "sc1_cmdvcc_l", 1, 0x10, 8),
+	CYGNUS_PIN_DESC(50, "sc1_detect", 1, 0x10, 6),
+	CYGNUS_PIN_DESC(51, "sc1_fcb", 1, 0x10, 4),
+	CYGNUS_PIN_DESC(52, "sc1_io", 1, 0x10, 2),
+	CYGNUS_PIN_DESC(53, "sc1_rst_l", 1, 0x10, 0),
+	CYGNUS_PIN_DESC(54, "spi0_clk", 1, 0x18, 10),
+	CYGNUS_PIN_DESC(55, "spi0_mosi", 1, 0x18, 6),
+	CYGNUS_PIN_DESC(56, "spi0_miso", 1, 0x18, 8),
+	CYGNUS_PIN_DESC(57, "spi0_ss", 1, 0x18, 4),
+	CYGNUS_PIN_DESC(58, "spi1_clk", 1, 0x18, 2),
+	CYGNUS_PIN_DESC(59, "spi1_mosi", 1, 0x1c, 30),
+	CYGNUS_PIN_DESC(60, "spi1_miso", 1, 0x18, 0),
+	CYGNUS_PIN_DESC(61, "spi1_ss", 1, 0x1c, 28),
+	CYGNUS_PIN_DESC(62, "spi2_clk", 1, 0x1c, 26),
+	CYGNUS_PIN_DESC(63, "spi2_mosi", 1, 0x1c, 22),
+	CYGNUS_PIN_DESC(64, "spi2_miso", 1, 0x1c, 24),
+	CYGNUS_PIN_DESC(65, "spi2_ss", 1, 0x1c, 20),
+	CYGNUS_PIN_DESC(66, "spi3_clk", 1, 0x1c, 18),
+	CYGNUS_PIN_DESC(67, "spi3_mosi", 1, 0x1c, 14),
+	CYGNUS_PIN_DESC(68, "spi3_miso", 1, 0x1c, 16),
+	CYGNUS_PIN_DESC(69, "spi3_ss", 1, 0x1c, 12),
+	CYGNUS_PIN_DESC(70, "uart0_cts", 1, 0x1c, 10),
+	CYGNUS_PIN_DESC(71, "uart0_rts", 1, 0x1c, 8),
+	CYGNUS_PIN_DESC(72, "uart0_rx", 1, 0x1c, 6),
+	CYGNUS_PIN_DESC(73, "uart0_tx", 1, 0x1c, 4),
+	CYGNUS_PIN_DESC(74, "uart1_cts", 1, 0x1c, 2),
+	CYGNUS_PIN_DESC(75, "uart1_dcd", 1, 0x1c, 0),
+	CYGNUS_PIN_DESC(76, "uart1_dsr", 1, 0x20, 14),
+	CYGNUS_PIN_DESC(77, "uart1_dtr", 1, 0x20, 12),
+	CYGNUS_PIN_DESC(78, "uart1_ri", 1, 0x20, 10),
+	CYGNUS_PIN_DESC(79, "uart1_rts", 1, 0x20, 8),
+	CYGNUS_PIN_DESC(80, "uart1_rx", 1, 0x20, 6),
+	CYGNUS_PIN_DESC(81, "uart1_tx", 1, 0x20, 4),
+	CYGNUS_PIN_DESC(82, "uart3_rx", 1, 0x20, 2),
+	CYGNUS_PIN_DESC(83, "uart3_tx", 1, 0x20, 0),
+	CYGNUS_PIN_DESC(84, "sdio1_clk_sdcard", 1, 0x14, 6),
+	CYGNUS_PIN_DESC(85, "sdio1_cmd", 1, 0x14, 4),
+	CYGNUS_PIN_DESC(86, "sdio1_data0", 1, 0x14, 2),
+	CYGNUS_PIN_DESC(87, "sdio1_data1", 1, 0x14, 0),
+	CYGNUS_PIN_DESC(88, "sdio1_data2", 1, 0x18, 30),
+	CYGNUS_PIN_DESC(89, "sdio1_data3", 1, 0x18, 28),
+	CYGNUS_PIN_DESC(90, "sdio1_wp_n", 1, 0x18, 24),
+	CYGNUS_PIN_DESC(91, "sdio1_card_rst", 1, 0x14, 10),
+	CYGNUS_PIN_DESC(92, "sdio1_led_on", 1, 0x18, 26),
+	CYGNUS_PIN_DESC(93, "sdio1_cd", 1, 0x14, 8),
+	CYGNUS_PIN_DESC(94, "sdio0_clk_sdcard", 1, 0x14, 26),
+	CYGNUS_PIN_DESC(95, "sdio0_cmd", 1, 0x14, 24),
+	CYGNUS_PIN_DESC(96, "sdio0_data0", 1, 0x14, 22),
+	CYGNUS_PIN_DESC(97, "sdio0_data1", 1, 0x14, 20),
+	CYGNUS_PIN_DESC(98, "sdio0_data2", 1, 0x14, 18),
+	CYGNUS_PIN_DESC(99, "sdio0_data3", 1, 0x14, 16),
+	CYGNUS_PIN_DESC(100, "sdio0_wp_n", 1, 0x14, 12),
+	CYGNUS_PIN_DESC(101, "sdio0_card_rst", 1, 0x14, 30),
+	CYGNUS_PIN_DESC(102, "sdio0_led_on", 1, 0x14, 14),
+	CYGNUS_PIN_DESC(103, "sdio0_cd", 1, 0x14, 28),
+	CYGNUS_PIN_DESC(104, "sflash_clk", 1, 0x18, 22),
+	CYGNUS_PIN_DESC(105, "sflash_cs_l", 1, 0x18, 20),
+	CYGNUS_PIN_DESC(106, "sflash_mosi", 1, 0x18, 14),
+	CYGNUS_PIN_DESC(107, "sflash_miso", 1, 0x18, 16),
+	CYGNUS_PIN_DESC(108, "sflash_wp_n", 1, 0x18, 12),
+	CYGNUS_PIN_DESC(109, "sflash_hold_n", 1, 0x18, 18),
+	CYGNUS_PIN_DESC(110, "nand_ale", 1, 0xc, 30),
+	CYGNUS_PIN_DESC(111, "nand_ce0_l", 1, 0xc, 28),
+	CYGNUS_PIN_DESC(112, "nand_ce1_l", 1, 0xc, 26),
+	CYGNUS_PIN_DESC(113, "nand_cle", 1, 0xc, 24),
+	CYGNUS_PIN_DESC(114, "nand_dq0", 1, 0xc, 22),
+	CYGNUS_PIN_DESC(115, "nand_dq1", 1, 0xc, 20),
+	CYGNUS_PIN_DESC(116, "nand_dq2", 1, 0xc, 18),
+	CYGNUS_PIN_DESC(117, "nand_dq3", 1, 0xc, 16),
+	CYGNUS_PIN_DESC(118, "nand_dq4", 1, 0xc, 14),
+	CYGNUS_PIN_DESC(119, "nand_dq5", 1, 0xc, 12),
+	CYGNUS_PIN_DESC(120, "nand_dq6", 1, 0xc, 10),
+	CYGNUS_PIN_DESC(121, "nand_dq7", 1, 0xc, 8),
+	CYGNUS_PIN_DESC(122, "nand_rb_l", 1, 0xc, 6),
+	CYGNUS_PIN_DESC(123, "nand_re_l", 1, 0xc, 4),
+	CYGNUS_PIN_DESC(124, "nand_we_l", 1, 0xc, 2),
+	CYGNUS_PIN_DESC(125, "nand_wp_l", 1, 0xc, 0),
+	CYGNUS_PIN_DESC(126, "lcd_clac", 1, 0x4, 26),
+	CYGNUS_PIN_DESC(127, "lcd_clcp", 1, 0x4, 24),
+	CYGNUS_PIN_DESC(128, "lcd_cld0", 1, 0x4, 22),
+	CYGNUS_PIN_DESC(129, "lcd_cld1", 1, 0x4, 0),
+	CYGNUS_PIN_DESC(130, "lcd_cld10", 1, 0x4, 20),
+	CYGNUS_PIN_DESC(131, "lcd_cld11", 1, 0x4, 18),
+	CYGNUS_PIN_DESC(132, "lcd_cld12", 1, 0x4, 16),
+	CYGNUS_PIN_DESC(133, "lcd_cld13", 1, 0x4, 14),
+	CYGNUS_PIN_DESC(134, "lcd_cld14", 1, 0x4, 12),
+	CYGNUS_PIN_DESC(135, "lcd_cld15", 1, 0x4, 10),
+	CYGNUS_PIN_DESC(136, "lcd_cld16", 1, 0x4, 8),
+	CYGNUS_PIN_DESC(137, "lcd_cld17", 1, 0x4, 6),
+	CYGNUS_PIN_DESC(138, "lcd_cld18", 1, 0x4, 4),
+	CYGNUS_PIN_DESC(139, "lcd_cld19", 1, 0x4, 2),
+	CYGNUS_PIN_DESC(140, "lcd_cld2", 1, 0x8, 22),
+	CYGNUS_PIN_DESC(141, "lcd_cld20", 1, 0x8, 30),
+	CYGNUS_PIN_DESC(142, "lcd_cld21", 1, 0x8, 28),
+	CYGNUS_PIN_DESC(143, "lcd_cld22", 1, 0x8, 26),
+	CYGNUS_PIN_DESC(144, "lcd_cld23", 1, 0x8, 24),
+	CYGNUS_PIN_DESC(145, "lcd_cld3", 1, 0x8, 20),
+	CYGNUS_PIN_DESC(146, "lcd_cld4", 1, 0x8, 18),
+	CYGNUS_PIN_DESC(147, "lcd_cld5", 1, 0x8, 16),
+	CYGNUS_PIN_DESC(148, "lcd_cld6", 1, 0x8, 14),
+	CYGNUS_PIN_DESC(149, "lcd_cld7", 1, 0x8, 12),
+	CYGNUS_PIN_DESC(150, "lcd_cld8", 1, 0x8, 10),
+	CYGNUS_PIN_DESC(151, "lcd_cld9", 1, 0x8, 8),
+	CYGNUS_PIN_DESC(152, "lcd_clfp", 1, 0x8, 6),
+	CYGNUS_PIN_DESC(153, "lcd_clle", 1, 0x8, 4),
+	CYGNUS_PIN_DESC(154, "lcd_cllp", 1, 0x8, 2),
+	CYGNUS_PIN_DESC(155, "lcd_clpower", 1, 0x8, 0),
+	CYGNUS_PIN_DESC(156, "camera_vsync", 1, 0x4, 30),
+	CYGNUS_PIN_DESC(157, "camera_trigger", 1, 0x0, 0),
+	CYGNUS_PIN_DESC(158, "camera_strobe", 1, 0x0, 2),
+	CYGNUS_PIN_DESC(159, "camera_standby", 1, 0x0, 4),
+	CYGNUS_PIN_DESC(160, "camera_reset_n", 1, 0x0, 6),
+	CYGNUS_PIN_DESC(161, "camera_pixdata9", 1, 0x0, 8),
+	CYGNUS_PIN_DESC(162, "camera_pixdata8", 1, 0x0, 10),
+	CYGNUS_PIN_DESC(163, "camera_pixdata7", 1, 0x0, 12),
+	CYGNUS_PIN_DESC(164, "camera_pixdata6", 1, 0x0, 14),
+	CYGNUS_PIN_DESC(165, "camera_pixdata5", 1, 0x0, 16),
+	CYGNUS_PIN_DESC(166, "camera_pixdata4", 1, 0x0, 18),
+	CYGNUS_PIN_DESC(167, "camera_pixdata3", 1, 0x0, 20),
+	CYGNUS_PIN_DESC(168, "camera_pixdata2", 1, 0x0, 22),
+	CYGNUS_PIN_DESC(169, "camera_pixdata1", 1, 0x0, 24),
+	CYGNUS_PIN_DESC(170, "camera_pixdata0", 1, 0x0, 26),
+	CYGNUS_PIN_DESC(171, "camera_pixclk", 1, 0x0, 28),
+	CYGNUS_PIN_DESC(172, "camera_hsync", 1, 0x0, 30),
+	CYGNUS_PIN_DESC(173, "camera_pll_ref_clk", 0, 0, 0),
+	CYGNUS_PIN_DESC(174, "usb_id_indication", 0, 0, 0),
+	CYGNUS_PIN_DESC(175, "usb_vbus_indication", 0, 0, 0),
+	CYGNUS_PIN_DESC(176, "gpio0_3p3", 0, 0, 0),
+	CYGNUS_PIN_DESC(177, "gpio1_3p3", 0, 0, 0),
+	CYGNUS_PIN_DESC(178, "gpio2_3p3", 0, 0, 0),
+	CYGNUS_PIN_DESC(179, "gpio3_3p3", 0, 0, 0),
+};
+
+/*
+ * List of groups of pins
+ */
+static const unsigned bsc1_pins[] = { 8, 9 };
+static const unsigned pcie_clkreq_pins[] = { 8, 9 };
+
+static const unsigned i2s2_0_pins[] = { 12 };
+static const unsigned i2s2_1_pins[] = { 13 };
+static const unsigned i2s2_2_pins[] = { 14 };
+static const unsigned i2s2_3_pins[] = { 15 };
+static const unsigned i2s2_4_pins[] = { 16 };
+
+static const unsigned pwm4_pins[] = { 17 };
+static const unsigned pwm5_pins[] = { 18 };
+
+static const unsigned key0_pins[] = { 20 };
+static const unsigned key1_pins[] = { 21 };
+static const unsigned key2_pins[] = { 22 };
+static const unsigned key3_pins[] = { 23 };
+static const unsigned key4_pins[] = { 24 };
+static const unsigned key5_pins[] = { 25 };
+
+static const unsigned key6_pins[] = { 26 };
+static const unsigned audio_dte0_pins[] = { 26 };
+
+static const unsigned key7_pins[] = { 27 };
+static const unsigned audio_dte1_pins[] = { 27 };
+
+static const unsigned key8_pins[] = { 28 };
+static const unsigned key9_pins[] = { 29 };
+static const unsigned key10_pins[] = { 30 };
+static const unsigned key11_pins[] = { 31 };
+static const unsigned key12_pins[] = { 32 };
+static const unsigned key13_pins[] = { 33 };
+
+static const unsigned key14_pins[] = { 34 };
+static const unsigned audio_dte2_pins[] = { 34 };
+
+static const unsigned key15_pins[] = { 35 };
+static const unsigned audio_dte3_pins[] = { 35 };
+
+static const unsigned pwm0_pins[] = { 38 };
+static const unsigned pwm1_pins[] = { 39 };
+static const unsigned pwm2_pins[] = { 40 };
+static const unsigned pwm3_pins[] = { 41 };
+
+static const unsigned sdio0_pins[] = { 94, 95, 96, 97, 98, 99 };
+
+static const unsigned smart_card0_pins[] = { 42, 43, 44, 46, 47 };
+static const unsigned i2s0_0_pins[] = { 42, 43, 44, 46 };
+static const unsigned spdif_pins[] = { 47 };
+
+static const unsigned smart_card1_pins[] = { 48, 49, 50, 52, 53 };
+static const unsigned i2s1_0_pins[] = { 48, 49, 50, 52 };
+
+static const unsigned spi0_pins[] = { 54, 55, 56, 57 };
+
+static const unsigned spi1_pins[] = { 58, 59, 60, 61 };
+
+static const unsigned spi2_pins[] = { 62, 63, 64, 65 };
+
+static const unsigned spi3_pins[] = { 66, 67, 68, 69 };
+static const unsigned sw_led0_0_pins[] = { 66, 67, 68, 69 };
+
+static const unsigned d1w_pins[] = { 10, 11 };
+static const unsigned uart4_pins[] = { 10, 11 };
+static const unsigned sw_led2_0_pins[] = { 10, 11 };
+
+static const unsigned lcd_pins[] = { 126, 127, 128, 129, 130, 131, 132, 133,
+	134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147,
+	148, 149, 150, 151, 152, 153, 154, 155 };
+static const unsigned sram_0_pins[] = { 126, 127, 128, 129, 130, 131, 132, 133,
+	134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147,
+	148, 149, 150, 151, 152, 153, 154, 155 };
+static const unsigned spi5_pins[] = { 141, 142, 143, 144 };
+
+static const unsigned uart0_pins[] = { 70, 71, 72, 73 };
+static const unsigned sw_led0_1_pins[] = { 70, 71, 72, 73 };
+
+static const unsigned uart1_dte_pins[] = { 75, 76, 77, 78 };
+static const unsigned uart2_pins[] = { 75, 76, 77, 78 };
+
+static const unsigned uart1_pins[] = { 74, 79, 80, 81 };
+
+static const unsigned uart3_pins[] = { 82, 83 };
+
+static const unsigned qspi_0_pins[] = { 104, 105, 106, 107 };
+
+static const unsigned nand_pins[] = { 110, 111, 112, 113, 114, 115, 116, 117,
+	118, 119, 120, 121, 122, 123, 124, 125 };
+
+static const unsigned sdio0_cd_pins[] = { 103 };
+
+static const unsigned sdio0_mmc_pins[] = { 100, 101, 102 };
+
+static const unsigned sdio1_data_0_pins[] = { 86, 87 };
+static const unsigned can0_pins[] = { 86, 87 };
+static const unsigned spi4_0_pins[] = { 86, 87 };
+
+static const unsigned sdio1_data_1_pins[] = { 88, 89 };
+static const unsigned can1_pins[] = { 88, 89 };
+static const unsigned spi4_1_pins[] = { 88, 89 };
+
+static const unsigned sdio1_cd_pins[] = { 93 };
+
+static const unsigned sdio1_led_pins[] = { 84, 85 };
+static const unsigned sw_led2_1_pins[] = { 84, 85 };
+
+static const unsigned sdio1_mmc_pins[] = { 90, 91, 92 };
+
+static const unsigned cam_led_pins[] = { 156, 157, 158, 159, 160 };
+static const unsigned sw_led1_pins[] = { 156, 157, 158, 159 };
+
+static const unsigned cam_0_pins[] = { 169, 170, 171, 169, 170 };
+
+static const unsigned cam_1_pins[] = { 161, 162, 163, 164, 165, 166, 167,
+	168 };
+static const unsigned sram_1_pins[] = { 161, 162, 163, 164, 165, 166, 167,
+	168 };
+
+static const unsigned qspi_1_pins[] = { 108, 109 };
+
+static const unsigned smart_card0_fcb_pins[] = { 45 };
+static const unsigned i2s0_1_pins[] = { 45 };
+
+static const unsigned smart_card1_fcb_pins[] = { 51 };
+static const unsigned i2s1_1_pins[] = { 51 };
+
+static const unsigned gpio0_3p3_pins[] = { 176 };
+static const unsigned usb0_oc_pins[] = { 176 };
+
+static const unsigned gpio1_3p3_pins[] = { 177 };
+static const unsigned usb1_oc_pins[] = { 177 };
+
+static const unsigned gpio2_3p3_pins[] = { 178 };
+static const unsigned usb2_oc_pins[] = { 178 };
+
+#define CYGNUS_PIN_GROUP(group_name, off, sh, al)	\
+{							\
+	.name = __stringify(group_name) "_grp",		\
+	.pins = group_name ## _pins,			\
+	.num_pins = ARRAY_SIZE(group_name ## _pins),	\
+	.mux = {					\
+		.offset = off,				\
+		.shift = sh,				\
+		.alt = al,				\
+	}						\
+}
+
+/*
+ * List of Cygnus pin groups
+ */
+static const struct cygnus_pin_group cygnus_pin_groups[] = {
+	CYGNUS_PIN_GROUP(i2s2_0, 0x0, 0, 2),
+	CYGNUS_PIN_GROUP(i2s2_1, 0x0, 4, 2),
+	CYGNUS_PIN_GROUP(i2s2_2, 0x0, 8, 2),
+	CYGNUS_PIN_GROUP(i2s2_3, 0x0, 12, 2),
+	CYGNUS_PIN_GROUP(i2s2_4, 0x0, 16, 2),
+	CYGNUS_PIN_GROUP(pwm4, 0x0, 20, 0),
+	CYGNUS_PIN_GROUP(pwm5, 0x0, 24, 2),
+	CYGNUS_PIN_GROUP(key0, 0x4, 0, 1),
+	CYGNUS_PIN_GROUP(key1, 0x4, 4, 1),
+	CYGNUS_PIN_GROUP(key2, 0x4, 8, 1),
+	CYGNUS_PIN_GROUP(key3, 0x4, 12, 1),
+	CYGNUS_PIN_GROUP(key4, 0x4, 16, 1),
+	CYGNUS_PIN_GROUP(key5, 0x4, 20, 1),
+	CYGNUS_PIN_GROUP(key6, 0x4, 24, 1),
+	CYGNUS_PIN_GROUP(audio_dte0, 0x4, 24, 2),
+	CYGNUS_PIN_GROUP(key7, 0x4, 28, 1),
+	CYGNUS_PIN_GROUP(audio_dte1, 0x4, 28, 2),
+	CYGNUS_PIN_GROUP(key8, 0x8, 0, 1),
+	CYGNUS_PIN_GROUP(key9, 0x8, 4, 1),
+	CYGNUS_PIN_GROUP(key10, 0x8, 8, 1),
+	CYGNUS_PIN_GROUP(key11, 0x8, 12, 1),
+	CYGNUS_PIN_GROUP(key12, 0x8, 16, 1),
+	CYGNUS_PIN_GROUP(key13, 0x8, 20, 1),
+	CYGNUS_PIN_GROUP(key14, 0x8, 24, 1),
+	CYGNUS_PIN_GROUP(audio_dte2, 0x8, 24, 2),
+	CYGNUS_PIN_GROUP(key15, 0x8, 28, 1),
+	CYGNUS_PIN_GROUP(audio_dte3, 0x8, 28, 2),
+	CYGNUS_PIN_GROUP(pwm0, 0xc, 0, 0),
+	CYGNUS_PIN_GROUP(pwm1, 0xc, 4, 0),
+	CYGNUS_PIN_GROUP(pwm2, 0xc, 8, 0),
+	CYGNUS_PIN_GROUP(pwm3, 0xc, 12, 0),
+	CYGNUS_PIN_GROUP(sdio0, 0xc, 16, 0),
+	CYGNUS_PIN_GROUP(smart_card0, 0xc, 20, 0),
+	CYGNUS_PIN_GROUP(i2s0_0, 0xc, 20, 1),
+	CYGNUS_PIN_GROUP(spdif, 0xc, 20, 1),
+	CYGNUS_PIN_GROUP(smart_card1, 0xc, 24, 0),
+	CYGNUS_PIN_GROUP(i2s1_0, 0xc, 24, 1),
+	CYGNUS_PIN_GROUP(spi0, 0x10, 0, 0),
+	CYGNUS_PIN_GROUP(spi1, 0x10, 4, 0),
+	CYGNUS_PIN_GROUP(spi2, 0x10, 8, 0),
+	CYGNUS_PIN_GROUP(spi3, 0x10, 12, 0),
+	CYGNUS_PIN_GROUP(sw_led0_0, 0x10, 12, 2),
+	CYGNUS_PIN_GROUP(d1w, 0x10, 16, 0),
+	CYGNUS_PIN_GROUP(uart4, 0x10, 16, 1),
+	CYGNUS_PIN_GROUP(sw_led2_0, 0x10, 16, 2),
+	CYGNUS_PIN_GROUP(lcd, 0x10, 20, 0),
+	CYGNUS_PIN_GROUP(sram_0, 0x10, 20, 1),
+	CYGNUS_PIN_GROUP(spi5, 0x10, 20, 2),
+	CYGNUS_PIN_GROUP(uart0, 0x14, 0, 0),
+	CYGNUS_PIN_GROUP(sw_led0_1, 0x14, 0, 2),
+	CYGNUS_PIN_GROUP(uart1_dte, 0x14, 4, 0),
+	CYGNUS_PIN_GROUP(uart2, 0x14, 4, 1),
+	CYGNUS_PIN_GROUP(uart1, 0x14, 8, 0),
+	CYGNUS_PIN_GROUP(uart3, 0x14, 12, 0),
+	CYGNUS_PIN_GROUP(qspi_0, 0x14, 16, 0),
+	CYGNUS_PIN_GROUP(nand, 0x14, 20, 0),
+	CYGNUS_PIN_GROUP(sdio0_cd, 0x18, 0, 0),
+	CYGNUS_PIN_GROUP(sdio0_mmc, 0x18, 4, 0),
+	CYGNUS_PIN_GROUP(sdio1_data_0, 0x18, 8, 0),
+	CYGNUS_PIN_GROUP(can0, 0x18, 8, 1),
+	CYGNUS_PIN_GROUP(spi4_0, 0x18, 8, 2),
+	CYGNUS_PIN_GROUP(sdio1_data_1, 0x18, 12, 0),
+	CYGNUS_PIN_GROUP(can1, 0x18, 12, 1),
+	CYGNUS_PIN_GROUP(spi4_1, 0x18, 12, 2),
+	CYGNUS_PIN_GROUP(sdio1_cd, 0x18, 16, 0),
+	CYGNUS_PIN_GROUP(sdio1_led, 0x18, 20, 0),
+	CYGNUS_PIN_GROUP(sw_led2_1, 0x18, 20, 2),
+	CYGNUS_PIN_GROUP(sdio1_mmc, 0x18, 24, 0),
+	CYGNUS_PIN_GROUP(cam_led, 0x1c, 0, 0),
+	CYGNUS_PIN_GROUP(sw_led1, 0x1c, 0, 1),
+	CYGNUS_PIN_GROUP(cam_0, 0x1c, 4, 0),
+	CYGNUS_PIN_GROUP(cam_1, 0x1c, 8, 0),
+	CYGNUS_PIN_GROUP(sram_1, 0x1c, 8, 1),
+	CYGNUS_PIN_GROUP(qspi_1, 0x1c, 12, 0),
+	CYGNUS_PIN_GROUP(bsc1, 0x1c, 16, 0),
+	CYGNUS_PIN_GROUP(pcie_clkreq, 0x1c, 16, 1),
+	CYGNUS_PIN_GROUP(smart_card0_fcb, 0x20, 0, 0),
+	CYGNUS_PIN_GROUP(i2s0_1, 0x20, 0, 1),
+	CYGNUS_PIN_GROUP(smart_card1_fcb, 0x20, 4, 0),
+	CYGNUS_PIN_GROUP(i2s1_1, 0x20, 4, 1),
+	CYGNUS_PIN_GROUP(gpio0_3p3, 0x28, 0, 0),
+	CYGNUS_PIN_GROUP(usb0_oc, 0x28, 0, 1),
+	CYGNUS_PIN_GROUP(gpio1_3p3, 0x28, 4, 0),
+	CYGNUS_PIN_GROUP(usb1_oc, 0x28, 4, 1),
+	CYGNUS_PIN_GROUP(gpio2_3p3, 0x28, 8, 0),
+	CYGNUS_PIN_GROUP(usb2_oc, 0x28, 8, 1),
+};
+
+/*
+ * List of groups supported by functions
+ */
+static const char * const i2s0_grps[] = { "i2s0_0_grp", "i2s0_1_grp" };
+static const char * const i2s1_grps[] = { "i2s1_0_grp", "i2s1_1_grp" };
+static const char * const i2s2_grps[] = { "i2s2_0_grp", "i2s2_1_grp",
+	"i2s2_2_grp", "i2s2_3_grp", "i2s2_4_grp" };
+static const char * const spdif_grps[] = { "spdif_grp" };
+static const char * const pwm0_grps[] = { "pwm0_grp" };
+static const char * const pwm1_grps[] = { "pwm1_grp" };
+static const char * const pwm2_grps[] = { "pwm2_grp" };
+static const char * const pwm3_grps[] = { "pwm3_grp" };
+static const char * const pwm4_grps[] = { "pwm4_grp" };
+static const char * const pwm5_grps[] = { "pwm5_grp" };
+static const char * const key_grps[] = { "key0_grp", "key1_grp", "key2_grp",
+	"key3_grp", "key4_grp", "key5_grp", "key6_grp", "key7_grp", "key8_grp",
+	"key9_grp", "key10_grp", "key11_grp", "key12_grp", "key13_grp",
+	"key14_grp", "key15_grp" };
+static const char * const audio_dte_grps[] = { "audio_dte0_grp",
+	"audio_dte1_grp", "audio_dte2_grp", "audio_dte3_grp" };
+static const char * const smart_card0_grps[] = { "smart_card0_grp",
+	"smart_card0_fcb_grp" };
+static const char * const smart_card1_grps[] = { "smart_card1_grp",
+	"smart_card1_fcb_grp" };
+static const char * const spi0_grps[] = { "spi0_grp" };
+static const char * const spi1_grps[] = { "spi1_grp" };
+static const char * const spi2_grps[] = { "spi2_grp" };
+static const char * const spi3_grps[] = { "spi3_grp" };
+static const char * const spi4_grps[] = { "spi4_0_grp", "spi4_1_grp" };
+static const char * const spi5_grps[] = { "spi5_grp" };
+
+static const char * const sw_led0_grps[] = { "sw_led0_0_grp",
+	"sw_led0_1_grp" };
+static const char * const sw_led1_grps[] = { "sw_led1_grp" };
+static const char * const sw_led2_grps[] = { "sw_led2_0_grp",
+	"sw_led2_1_grp" };
+static const char * const d1w_grps[] = { "d1w_grp" };
+static const char * const lcd_grps[] = { "lcd_grp" };
+static const char * const sram_grps[] = { "sram_0_grp", "sram_1_grp" };
+
+static const char * const uart0_grps[] = { "uart0_grp" };
+static const char * const uart1_grps[] = { "uart1_grp", "uart1_dte_grp" };
+static const char * const uart2_grps[] = { "uart2_grp" };
+static const char * const uart3_grps[] = { "uart3_grp" };
+static const char * const uart4_grps[] = { "uart4_grp" };
+static const char * const qspi_grps[] = { "qspi_0_grp", "qspi_1_grp" };
+static const char * const nand_grps[] = { "nand_grp" };
+static const char * const sdio0_grps[] = { "sdio0_grp", "sdio0_cd_grp",
+	"sdio0_mmc_grp" };
+static const char * const sdio1_grps[] = { "sdio1_data_0_grp",
+	"sdio1_data_1_grp", "sdio1_cd_grp", "sdio1_led_grp", "sdio1_mmc_grp" };
+static const char * const can0_grps[] = { "can0_grp" };
+static const char * const can1_grps[] = { "can1_grp" };
+static const char * const cam_grps[] = { "cam_led_grp", "cam_0_grp",
+	"cam_1_grp" };
+static const char * const bsc1_grps[] = { "bsc1_grp" };
+static const char * const pcie_clkreq_grps[] = { "pcie_clkreq_grp" };
+static const char * const usb0_oc_grps[] = { "usb0_oc_grp" };
+static const char * const usb1_oc_grps[] = { "usb1_oc_grp" };
+static const char * const usb2_oc_grps[] = { "usb2_oc_grp" };
+
+#define CYGNUS_PIN_FUNCTION(func)				\
+{								\
+	.name = #func,						\
+	.groups = func ## _grps,				\
+	.num_groups = ARRAY_SIZE(func ## _grps),		\
+}
+
+/*
+ * List of supported functions in Cygnus
+ */
+static const struct cygnus_pin_function cygnus_pin_functions[] = {
+	CYGNUS_PIN_FUNCTION(i2s0),
+	CYGNUS_PIN_FUNCTION(i2s1),
+	CYGNUS_PIN_FUNCTION(i2s2),
+	CYGNUS_PIN_FUNCTION(spdif),
+	CYGNUS_PIN_FUNCTION(pwm0),
+	CYGNUS_PIN_FUNCTION(pwm1),
+	CYGNUS_PIN_FUNCTION(pwm2),
+	CYGNUS_PIN_FUNCTION(pwm3),
+	CYGNUS_PIN_FUNCTION(pwm4),
+	CYGNUS_PIN_FUNCTION(pwm5),
+	CYGNUS_PIN_FUNCTION(key),
+	CYGNUS_PIN_FUNCTION(audio_dte),
+	CYGNUS_PIN_FUNCTION(smart_card0),
+	CYGNUS_PIN_FUNCTION(smart_card1),
+	CYGNUS_PIN_FUNCTION(spi0),
+	CYGNUS_PIN_FUNCTION(spi1),
+	CYGNUS_PIN_FUNCTION(spi2),
+	CYGNUS_PIN_FUNCTION(spi3),
+	CYGNUS_PIN_FUNCTION(spi4),
+	CYGNUS_PIN_FUNCTION(spi5),
+	CYGNUS_PIN_FUNCTION(sw_led0),
+	CYGNUS_PIN_FUNCTION(sw_led1),
+	CYGNUS_PIN_FUNCTION(sw_led2),
+	CYGNUS_PIN_FUNCTION(d1w),
+	CYGNUS_PIN_FUNCTION(lcd),
+	CYGNUS_PIN_FUNCTION(sram),
+	CYGNUS_PIN_FUNCTION(uart0),
+	CYGNUS_PIN_FUNCTION(uart1),
+	CYGNUS_PIN_FUNCTION(uart2),
+	CYGNUS_PIN_FUNCTION(uart3),
+	CYGNUS_PIN_FUNCTION(uart4),
+	CYGNUS_PIN_FUNCTION(qspi),
+	CYGNUS_PIN_FUNCTION(nand),
+	CYGNUS_PIN_FUNCTION(sdio0),
+	CYGNUS_PIN_FUNCTION(sdio1),
+	CYGNUS_PIN_FUNCTION(can0),
+	CYGNUS_PIN_FUNCTION(can1),
+	CYGNUS_PIN_FUNCTION(cam),
+	CYGNUS_PIN_FUNCTION(bsc1),
+	CYGNUS_PIN_FUNCTION(pcie_clkreq),
+	CYGNUS_PIN_FUNCTION(usb0_oc),
+	CYGNUS_PIN_FUNCTION(usb1_oc),
+	CYGNUS_PIN_FUNCTION(usb2_oc),
+};
+
+static int cygnus_get_groups_count(struct pinctrl_dev *pctrl_dev)
+{
+	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->num_groups;
+}
+
+static const char *cygnus_get_group_name(struct pinctrl_dev *pctrl_dev,
+					 unsigned selector)
+{
+	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->groups[selector].name;
+}
+
+static int cygnus_get_group_pins(struct pinctrl_dev *pctrl_dev,
+				 unsigned selector, const unsigned **pins,
+				 unsigned *num_pins)
+{
+	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	*pins = pinctrl->groups[selector].pins;
+	*num_pins = pinctrl->groups[selector].num_pins;
+
+	return 0;
+}
+
+static void cygnus_pin_dbg_show(struct pinctrl_dev *pctrl_dev,
+				struct seq_file *s, unsigned offset)
+{
+	seq_printf(s, " %s", dev_name(pctrl_dev->dev));
+}
+
+static const struct pinctrl_ops cygnus_pinctrl_ops = {
+	.get_groups_count = cygnus_get_groups_count,
+	.get_group_name = cygnus_get_group_name,
+	.get_group_pins = cygnus_get_group_pins,
+	.pin_dbg_show = cygnus_pin_dbg_show,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_group,
+	.dt_free_map = pinctrl_utils_dt_free_map,
+};
+
+static int cygnus_get_functions_count(struct pinctrl_dev *pctrl_dev)
+{
+	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->num_functions;
+}
+
+static const char *cygnus_get_function_name(struct pinctrl_dev *pctrl_dev,
+					    unsigned selector)
+{
+	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	return pinctrl->functions[selector].name;
+}
+
+static int cygnus_get_function_groups(struct pinctrl_dev *pctrl_dev,
+				      unsigned selector,
+				      const char * const **groups,
+				      unsigned * const num_groups)
+{
+	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+
+	*groups = pinctrl->functions[selector].groups;
+	*num_groups = pinctrl->functions[selector].num_groups;
+
+	return 0;
+}
+
+static int cygnus_pinmux_set(struct cygnus_pinctrl *pinctrl,
+			     const struct cygnus_pin_function *func,
+			     const struct cygnus_pin_group *grp,
+			     struct cygnus_mux_log *mux_log)
+{
+	const struct cygnus_mux *mux = &grp->mux;
+	int i;
+	u32 val, mask = 0x7;
+	unsigned long flags;
+
+	for (i = 0; i < CYGNUS_NUM_IOMUX; i++) {
+		if (mux->offset != mux_log[i].mux.offset ||
+		    mux->shift != mux_log[i].mux.shift)
+			continue;
+
+		/* match found if we reach here */
+
+		/* if this is a new configuration, just do it! */
+		if (!mux_log[i].is_configured)
+			break;
+
+		/*
+		 * IOMUX has been configured previously and one is trying to
+		 * configure it to a different function
+		 */
+		if (mux_log[i].mux.alt != mux->alt) {
+			dev_err(pinctrl->dev,
+				"double configuration error detected!\n");
+			dev_err(pinctrl->dev, "func:%s grp:%s\n",
+				func->name, grp->name);
+			return -EINVAL;
+		} else {
+			/*
+			 * One tries to configure it to the same function.
+			 * Just quit and don't bother
+			 */
+			return 0;
+		}
+	}
+
+	mux_log[i].mux.alt = mux->alt;
+	mux_log[i].is_configured = true;
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+
+	val = readl(pinctrl->base0 + grp->mux.offset);
+	val &= ~(mask << grp->mux.shift);
+	val |= grp->mux.alt << grp->mux.shift;
+	writel(val, pinctrl->base0 + grp->mux.offset);
+
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	return 0;
+}
+
+static int cygnus_pinmux_set_mux(struct pinctrl_dev *pctrl_dev,
+				 unsigned func_select, unsigned grp_select)
+{
+	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+	const struct cygnus_pin_function *func =
+		&pinctrl->functions[func_select];
+	const struct cygnus_pin_group *grp = &pinctrl->groups[grp_select];
+
+	dev_dbg(pctrl_dev->dev, "func:%u name:%s grp:%u name:%s\n",
+		func_select, func->name, grp_select, grp->name);
+
+	dev_dbg(pctrl_dev->dev, "offset:0x%08x shift:%u alt:%u\n",
+		grp->mux.offset, grp->mux.shift, grp->mux.alt);
+
+	return cygnus_pinmux_set(pinctrl, func, grp, pinctrl->mux_log);
+}
+
+static int cygnus_gpio_request_enable(struct pinctrl_dev *pctrl_dev,
+				      struct pinctrl_gpio_range *range,
+				      unsigned pin)
+{
+	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+	const struct cygnus_gpio_mux *mux = pctrl_dev->desc->pins[pin].drv_data;
+	u32 val;
+	unsigned long flags;
+
+	/* not all pins support GPIO pinmux override */
+	if (!mux->is_supported)
+		return -ENOTSUPP;
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+
+	val = readl(pinctrl->base1 + mux->offset);
+	val |= 0x3 << mux->shift;
+	writel(val, pinctrl->base1 + mux->offset);
+
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	dev_dbg(pctrl_dev->dev,
+		"gpio request enable pin=%u offset=0x%x shift=%u\n",
+		pin, mux->offset, mux->shift);
+
+	return 0;
+}
+
+static void cygnus_gpio_disable_free(struct pinctrl_dev *pctrl_dev,
+				     struct pinctrl_gpio_range *range,
+				     unsigned pin)
+{
+	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
+	struct cygnus_gpio_mux *mux = pctrl_dev->desc->pins[pin].drv_data;
+	u32 val;
+	unsigned long flags;
+
+	if (!mux->is_supported)
+		return;
+
+	spin_lock_irqsave(&pinctrl->lock, flags);
+
+	val = readl(pinctrl->base1 + mux->offset);
+	val &= ~(0x3 << mux->shift);
+	writel(val, pinctrl->base1 + mux->offset);
+
+	spin_unlock_irqrestore(&pinctrl->lock, flags);
+
+	dev_err(pctrl_dev->dev,
+		"gpio disable free pin=%u offset=0x%x shift=%u\n",
+		pin, mux->offset, mux->shift);
+}
+
+static const struct pinmux_ops cygnus_pinmux_ops = {
+	.get_functions_count = cygnus_get_functions_count,
+	.get_function_name = cygnus_get_function_name,
+	.get_function_groups = cygnus_get_function_groups,
+	.set_mux = cygnus_pinmux_set_mux,
+	.gpio_request_enable = cygnus_gpio_request_enable,
+	.gpio_disable_free = cygnus_gpio_disable_free,
+};
+
+static struct pinctrl_desc cygnus_pinctrl_desc = {
+	.name = "cygnus-pinmux",
+	.pctlops = &cygnus_pinctrl_ops,
+	.pmxops = &cygnus_pinmux_ops,
+};
+
+static int cygnus_mux_log_init(struct cygnus_pinctrl *pinctrl)
+{
+	struct cygnus_mux_log *log;
+	unsigned int i, j;
+
+	pinctrl->mux_log = devm_kcalloc(pinctrl->dev, CYGNUS_NUM_IOMUX,
+					sizeof(struct cygnus_mux_log),
+					GFP_KERNEL);
+	if (!pinctrl->mux_log)
+		return -ENOMEM;
+
+	log = pinctrl->mux_log;
+	for (i = 0; i < CYGNUS_NUM_IOMUX_REGS; i++) {
+		for (j = 0; j < CYGNUS_NUM_MUX_PER_REG; j++) {
+			log = &pinctrl->mux_log[i * CYGNUS_NUM_MUX_PER_REG
+				+ j];
+			log->mux.offset = i * 4;
+			log->mux.shift = j * 4;
+			log->mux.alt = 0;
+			log->is_configured = false;
+		}
+	}
+
+	return 0;
+}
+
+static int cygnus_pinmux_probe(struct platform_device *pdev)
+{
+	struct cygnus_pinctrl *pinctrl;
+	struct resource *res;
+	int i, ret;
+	struct pinctrl_pin_desc *pins;
+	unsigned num_pins = ARRAY_SIZE(cygnus_pins);
+
+	pinctrl = devm_kzalloc(&pdev->dev, sizeof(*pinctrl), GFP_KERNEL);
+	if (!pinctrl)
+		return -ENOMEM;
+
+	pinctrl->dev = &pdev->dev;
+	platform_set_drvdata(pdev, pinctrl);
+	spin_lock_init(&pinctrl->lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pinctrl->base0 = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pinctrl->base0)) {
+		dev_err(&pdev->dev, "unable to map I/O space\n");
+		return PTR_ERR(pinctrl->base0);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	pinctrl->base1 = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pinctrl->base1)) {
+		dev_err(&pdev->dev, "unable to map I/O space\n");
+		return PTR_ERR(pinctrl->base1);
+	}
+
+	ret = cygnus_mux_log_init(pinctrl);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to initialize IOMUX log\n");
+		return ret;
+	}
+
+	pins = devm_kcalloc(&pdev->dev, num_pins, sizeof(*pins), GFP_KERNEL);
+	if (!pins)
+		return -ENOMEM;
+
+	for (i = 0; i < num_pins; i++) {
+		pins[i].number = cygnus_pins[i].pin;
+		pins[i].name = cygnus_pins[i].name;
+		pins[i].drv_data = &cygnus_pins[i].gpio_mux;
+	}
+
+	pinctrl->groups = cygnus_pin_groups;
+	pinctrl->num_groups = ARRAY_SIZE(cygnus_pin_groups);
+	pinctrl->functions = cygnus_pin_functions;
+	pinctrl->num_functions = ARRAY_SIZE(cygnus_pin_functions);
+	cygnus_pinctrl_desc.pins = pins;
+	cygnus_pinctrl_desc.npins = num_pins;
+
+	pinctrl->pctl = pinctrl_register(&cygnus_pinctrl_desc, &pdev->dev,
+			pinctrl);
+	if (!pinctrl->pctl) {
+		dev_err(&pdev->dev, "unable to register Cygnus IOMUX pinctrl\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id cygnus_pinmux_of_match[] = {
+	{ .compatible = "brcm,cygnus-pinmux" },
+	{ }
+};
+
+static struct platform_driver cygnus_pinmux_driver = {
+	.driver = {
+		.name = "cygnus-pinmux",
+		.of_match_table = cygnus_pinmux_of_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe = cygnus_pinmux_probe,
+};
+
+static int __init cygnus_pinmux_init(void)
+{
+	return platform_driver_register(&cygnus_pinmux_driver);
+}
+arch_initcall(cygnus_pinmux_init);
+
+MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom Cygnus IOMUX driver");
+MODULE_LICENSE("GPL v2");