@@ -840,14 +840,14 @@
#address-cells = <1>;
#size-cells = <1>;
ranges;
+ };
- usbdrd_dwc3_0: dwc3 {
- compatible = "snps,dwc3";
- reg = <0x12000000 0x10000>;
- interrupts = <0 72 0>;
- phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
- phy-names = "usb2-phy", "usb3-phy";
- };
+ usbdrd_dwc3_0: dwc3 {
+ compatible = "snps,dwc3";
+ reg = <0x12000000 0x10000>;
+ interrupts = <0 72 0>;
+ phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
+ phy-names = "usb2-phy", "usb3-phy";
};
usbdrd_phy0: phy@12100000 {
@@ -866,14 +866,14 @@
#address-cells = <1>;
#size-cells = <1>;
ranges;
+ };
- usbdrd_dwc3_1: dwc3 {
- compatible = "snps,dwc3";
- reg = <0x12400000 0x10000>;
- interrupts = <0 73 0>;
- phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
- phy-names = "usb2-phy", "usb3-phy";
- };
+ usbdrd_dwc3_1: dwc3 {
+ compatible = "snps,dwc3";
+ reg = <0x12400000 0x10000>;
+ interrupts = <0 73 0>;
+ phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
+ phy-names = "usb2-phy", "usb3-phy";
};
usbdrd_phy1: phy@12500000 {
BUG of recursive symbolic link and be observed by using below powerdebug git://git.linaro.org/tools/powerdebug.git. This utility populates the Clock, Regulators, Sensors and Gpio. Some how the regulators were not getting populated by this utility. After debugging this powerdebug application using 'strace' I can across following. Below output is trunkated. stat64("/sys/class/regulator/regulator.0/usb@12000000-vdd10/ iommu_group/devices/usb@12000000/iommu_group/devices/usb@12000000/ iommu_group/devices/usb@12000000/iommu_group/devices/usb@12000000/ iommu_group/devices/usb@12000000/iommu_group/devices/usb@12000000/ iommu_group/devices/usb@12000000/iommu_group/devices/usb@12000000/ iommu_group/devices/usb@12000000/iommu_group/devices/usb@12000000/ iommu_group/devices/usb@12000000/iommu_group/devices/usb@12000000/ iommu_group/devices/usb@12000000/iommu_group/devices/usb@12000000/ iommu_group/devices/usb@12000000/iommu_group/devices/usb@12000000/ iommu_group/devices/usb@12000000/iommu_group/devices/usb@12000000/ iommu_group/devices/usb@12000000/iommu_group", 0xbec45fb8) = -1 ELOOP (Too many levels of symbolic links) close(63) = 0 close(62) = 0 These changes depend on following series of commit. Pull iommu fixes from Joerg Roedel: "The patches contain: - fix multiple ARM IOMMU drivers to behave well when the hardware is not present - mark MSM driver as broken - fix build errors with the new ARM generic io-page-table code" * tag 'iommu-fixes-v4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/io-pgtable-arm: Add built time dependency iommu/msm: Mark driver BROKEN iommu/rockchip: Play nice in multi-platform builds iommu/omap: Play nice in multi-platform builds iommu/exynos: Play nice in multi-platform builds iommu/io-pgtable-arm: Fix self-test WARNs on i386 After these changes powerdebug will populate regulators. Tested on OdroidXU3 board. Signed-off-by: Anand Moon <moon.linux@yahoo.com> --- arch/arm/boot/dts/exynos5420.dtsi | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)