@@ -23,6 +23,7 @@ Required properties:
"ti,omap4-scm-padconf-core"
"ti,omap5-scm-core"
"ti,omap5-scm-padconf-core"
+ "ti,dra7-scm-core"
- reg: Contains Control Module register address range
(base address and length)
@@ -10,6 +10,8 @@ Required properties:
Should be "ti,omap4-l4-wkup" for OMAP4 family l4 wkup bus
Should be "ti,omap5-l4-cfg" for OMAP5 family l4 cfg bus
Should be "ti,omap5-l4-wkup" for OMAP5 family l4 wkup bus
+ Should be "ti,dra7-l4-cfg" for DRA7 family l4 cfg bus
+ Should be "ti,dra7-l4-wkup" for DRA7 family l4 wkup bus
Should be "ti,am3-l4-wkup" for AM33xx family l4 wkup bus
Should be "ti,am4-l4-wkup" for AM43xx family l4 wkup bus
- ranges : contains the IO map range for the bus
@@ -94,17 +94,101 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI DIRECT_IRQ(10) IRQ_TYPE_LEVEL_HIGH>;
- prm: prm@4ae06000 {
- compatible = "ti,dra7-prm";
- reg = <0x4ae06000 0x3000>;
- interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ l4_cfg: l4@4a000000 {
+ compatible = "ti,dra7-l4-cfg", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4a000000 0x22c000>;
- prm_clocks: clocks {
+ scm: scm@2000 {
+ compatible = "ti,dra7-scm-core", "simple-bus";
+ reg = <0x2000 0x2000>;
#address-cells = <1>;
- #size-cells = <0>;
+ #size-cells = <1>;
+ ranges = <0 0x2000 0x2000>;
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon";
+ reg = <0x0 0x1400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0xe00 0x4>;
+ syscon = <&scm_conf>;
+ pbias_mmc_reg: pbias_mmc_omap5 {
+ regulator-name = "pbias_mmc_omap5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
+
+ dra7_pmx_core: pinmux@1400 {
+ compatible = "ti,dra7-padconf",
+ "pinctrl-single";
+ reg = <0x1400 0x0464>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x3fffffff>;
+ };
+ };
+
+ cm_core_aon: cm_core_aon@5000 {
+ compatible = "ti,dra7-cm-core-aon";
+ reg = <0x5000 0x2000>;
+
+ cm_core_aon_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm_core_aon_clockdomains: clockdomains {
+ };
+ };
+
+ cm_core: cm_core@8000 {
+ compatible = "ti,dra7-cm-core";
+ reg = <0x8000 0x3000>;
+
+ cm_core_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm_core_clockdomains: clockdomains {
+ };
};
+ };
- prm_clockdomains: clockdomains {
+ l4_wkup: l4@4ae00000 {
+ compatible = "ti,dra7-l4-wkup", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4ae00000 0x3f000>;
+
+ counter32k: counter@4000 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x4000 0x40>;
+ ti,hwmods = "counter_32k";
+ };
+
+ prm: prm@6000 {
+ compatible = "ti,dra7-prm";
+ reg = <0x6000 0x3000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+ prm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prm_clockdomains: clockdomains {
+ };
};
};
@@ -177,70 +261,6 @@
};
};
- cm_core_aon: cm_core_aon@4a005000 {
- compatible = "ti,dra7-cm-core-aon";
- reg = <0x4a005000 0x2000>;
-
- cm_core_aon_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- cm_core_aon_clockdomains: clockdomains {
- };
- };
-
- cm_core: cm_core@4a008000 {
- compatible = "ti,dra7-cm-core";
- reg = <0x4a008000 0x3000>;
-
- cm_core_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- cm_core_clockdomains: clockdomains {
- };
- };
-
- counter32k: counter@4ae04000 {
- compatible = "ti,omap-counter32k";
- reg = <0x4ae04000 0x40>;
- ti,hwmods = "counter_32k";
- };
-
- dra7_ctrl_core: ctrl_core@4a002000 {
- compatible = "syscon";
- reg = <0x4a002000 0x6d0>;
- };
-
- dra7_ctrl_general: tisyscon@4a002e00 {
- compatible = "syscon";
- reg = <0x4a002e00 0x7c>;
- };
-
- pbias_regulator: pbias_regulator {
- compatible = "ti,pbias-omap";
- reg = <0 0x4>;
- syscon = <&dra7_ctrl_general>;
- pbias_mmc_reg: pbias_mmc_omap5 {
- regulator-name = "pbias_mmc_omap5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- };
- };
-
- dra7_pmx_core: pinmux@4a003400 {
- compatible = "ti,dra7-padconf", "pinctrl-single";
- reg = <0x4a003400 0x0464>;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0x3fffffff>;
- };
-
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
@@ -1410,7 +1430,7 @@
compatible = "ti,dra7-d_can";
ti,hwmods = "dcan1";
reg = <0x4ae3c000 0x2000>;
- syscon-raminit = <&dra7_ctrl_core 0x558 0>;
+ syscon-raminit = <&scm_conf 0x558 0>;
interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&dcan1_sys_clk_mux>;
status = "disabled";
@@ -1420,7 +1440,7 @@
compatible = "ti,dra7-d_can";
ti,hwmods = "dcan2";
reg = <0x48480000 0x2000>;
- syscon-raminit = <&dra7_ctrl_core 0x558 1>;
+ syscon-raminit = <&scm_conf 0x558 1>;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sys_clkin1>;
status = "disabled";
This patch creates the l4_cfg and l4_wkup interconnects for DRA7, and moves some of the generic peripherals under it. System control module support is added to the device tree also, and the existing SCM related functionality is moved under it. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- .../devicetree/bindings/arm/omap/ctrl.txt | 1 + Documentation/devicetree/bindings/arm/omap/l4.txt | 2 + arch/arm/boot/dts/dra7.dtsi | 166 +++++++++++--------- 3 files changed, 96 insertions(+), 73 deletions(-)