diff mbox

[v6,2/6] mfd: axp20x: update DT bindings with AXP22x compatibles

Message ID 1427868203-7486-3-git-send-email-wens@csie.org (mailing list archive)
State New, archived
Headers show

Commit Message

Chen-Yu Tsai April 1, 2015, 6:03 a.m. UTC 
Add AXP221 to the list of supported devices.

Also replace any mention of AXP20x in the document with a
generic "PMIC".

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
 Documentation/devicetree/bindings/mfd/axp20x.txt | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
index 98685f291a72..3914a3f91ff6 100644
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -1,15 +1,16 @@ 
-AXP202/AXP209 device tree bindings
+AXP family PMIC device tree bindings
 
 The axp20x family current members :
 axp202 (X-Powers)
 axp209 (X-Powers)
+axp221 (X-Powers)
 
 Required properties:
-- compatible: "x-powers,axp202" or "x-powers,axp209"
+- compatible: "x-powers,axp202", "x-powers,axp209", "x-powers,axp221"
 - reg: The I2C slave address for the AXP chip
 - interrupt-parent: The parent interrupt controller
 - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
-- interrupt-controller: axp20x has its own internal IRQs
+- interrupt-controller: The PMIC has its own internal IRQs
 - #interrupt-cells: Should be set to 1
 
 Optional properties: