diff mbox

[v2,2/4] Documentation: bindings: document the Berlin ADC driver

Message ID 1428066409-30392-3-git-send-email-antoine.tenart@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Antoine Tenart April 3, 2015, 1:06 p.m. UTC
Following the addition of a Berlin ADC driver, this patch adds the
corresponding bindings documentation.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
 .../devicetree/bindings/iio/adc/berlin2_adc.txt       | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt

Comments

Jonathan Cameron April 9, 2015, 2 p.m. UTC | #1
On 03/04/15 14:06, Antoine Tenart wrote:
> Following the addition of a Berlin ADC driver, this patch adds the
> corresponding bindings documentation.
> 
> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
About as straightfoward as they come.

Acked-by: Jonathan Cameron <jic23@kernel.org>
> ---
>  .../devicetree/bindings/iio/adc/berlin2_adc.txt       | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
> new file mode 100644
> index 000000000000..908334c6b07f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
> @@ -0,0 +1,19 @@
> +* Berlin Analog to Digital Converter (ADC)
> +
> +The Berlin ADC has 8 channels, with one connected to a temperature sensor.
> +It is part of the system controller register set. The ADC node should be a
> +sub-node of the system controller node.
> +
> +Required properties:
> +- compatible: must be "marvell,berlin2-adc"
> +- interrupts: the interrupts for the ADC and the temperature sensor
> +- interrupt-names: should be "adc" and "tsen"
> +
> +Example:
> +
> +adc: adc {
> +	compatible = "marvell,berlin2-adc";
> +	interrupt-parent = <&sic>;
> +	interrupts = <12>, <14>;
> +	interrupt-names = "adc", "tsen";
> +};
>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
new file mode 100644
index 000000000000..908334c6b07f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
@@ -0,0 +1,19 @@ 
+* Berlin Analog to Digital Converter (ADC)
+
+The Berlin ADC has 8 channels, with one connected to a temperature sensor.
+It is part of the system controller register set. The ADC node should be a
+sub-node of the system controller node.
+
+Required properties:
+- compatible: must be "marvell,berlin2-adc"
+- interrupts: the interrupts for the ADC and the temperature sensor
+- interrupt-names: should be "adc" and "tsen"
+
+Example:
+
+adc: adc {
+	compatible = "marvell,berlin2-adc";
+	interrupt-parent = <&sic>;
+	interrupts = <12>, <14>;
+	interrupt-names = "adc", "tsen";
+};