@@ -56,7 +56,7 @@
sdhci0: sdhci@ab0000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
- clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+ clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
clock-names = "io", "core";
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -65,7 +65,7 @@
sdhci1: sdhci@ab0800 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0800 0x200>;
- clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+ clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO1>;
clock-names = "io", "core";
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -75,7 +75,7 @@
compatible = "mrvl,pxav3-mmc";
reg = <0xab1000 0x200>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
+ clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
clock-names = "io", "core";
pinctrl-0 = <&emmc_pmux>;
pinctrl-names = "default";
@@ -105,13 +105,13 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
- clocks = <&chip CLKID_TWD>;
+ clocks = <&chip_clk CLKID_TWD>;
};
eth1: ethernet@b90000 {
compatible = "marvell,pxa168-eth";
reg = <0xb90000 0x10000>;
- clocks = <&chip CLKID_GETH1>;
+ clocks = <&chip_clk CLKID_GETH1>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
/* set by bootloader */
local-mac-address = [00 00 00 00 00 00];
@@ -134,7 +134,7 @@
eth0: ethernet@e50000 {
compatible = "marvell,pxa168-eth";
reg = <0xe50000 0x10000>;
- clocks = <&chip CLKID_GETH0>;
+ clocks = <&chip_clk CLKID_GETH0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
/* set by bootloader */
local-mac-address = [00 00 00 00 00 00];
@@ -233,7 +233,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
interrupts = <8>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "okay";
};
@@ -242,7 +242,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c14 0x14>;
interrupts = <9>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "okay";
};
@@ -251,7 +251,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c28 0x14>;
interrupts = <10>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -260,7 +260,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c3c 0x14>;
interrupts = <11>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -269,7 +269,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c50 0x14>;
interrupts = <12>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -278,7 +278,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c64 0x14>;
interrupts = <13>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -287,7 +287,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c78 0x14>;
interrupts = <14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -296,7 +296,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c8c 0x14>;
interrupts = <15>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -315,7 +315,7 @@
compatible = "marvell,berlin2-ahci", "generic-ahci";
reg = <0xe90000 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_SATA>;
+ clocks = <&chip_clk CLKID_SATA>;
#address-cells = <1>;
#size-cells = <0>;
@@ -335,7 +335,7 @@
sata_phy: phy@e900a0 {
compatible = "marvell,berlin2-sata-phy";
reg = <0xe900a0 0x200>;
- clocks = <&chip CLKID_SATA>;
+ clocks = <&chip_clk CLKID_SATA>;
#address-cells = <1>;
#size-cells = <0>;
#phy-cells = <1>;
@@ -353,9 +353,14 @@
chip: chip-controller@ea0000 {
compatible = "marvell,berlin2-chip-ctrl", "simple-mfd", "syscon";
reg = <0xea0000 0x400>;
- #clock-cells = <1>;
- clocks = <&refclk>;
- clock-names = "refclk";
+
+ chip_clk: clock {
+ compatible = "marvell,berlin2-clk";
+
+ #clock-cells = <1>;
+ clocks = <&refclk>;
+ clock-names = "refclk";
+ };
soc_pinctrl: pin-controller {
compatible = "marvell,berlin2-soc-pinctrl";
With the introduction of the Berlin mfd controller driver, all drivers previously sharing the chip and system controller nodes now have their own sub-node. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> --- arch/arm/boot/dts/berlin2.dtsi | 43 +++++++++++++++++++++++------------------- 1 file changed, 24 insertions(+), 19 deletions(-)