@@ -53,7 +53,7 @@
sdhci0: sdhci@ab0000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
- clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+ clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
clock-names = "io", "core";
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -77,7 +77,7 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
- clocks = <&chip CLKID_TWD>;
+ clocks = <&chip_clk CLKID_TWD>;
};
usb_phy0: usb-phy@b74000 {
@@ -99,7 +99,7 @@
eth1: ethernet@b90000 {
compatible = "marvell,pxa168-eth";
reg = <0xb90000 0x10000>;
- clocks = <&chip CLKID_GETH1>;
+ clocks = <&chip_clk CLKID_GETH1>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
/* set by bootloader */
local-mac-address = [00 00 00 00 00 00];
@@ -117,7 +117,7 @@
eth0: ethernet@e50000 {
compatible = "marvell,pxa168-eth";
reg = <0xe50000 0x10000>;
- clocks = <&chip CLKID_GETH0>;
+ clocks = <&chip_clk CLKID_GETH0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
/* set by bootloader */
local-mac-address = [00 00 00 00 00 00];
@@ -216,7 +216,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
interrupts = <8>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "okay";
};
@@ -225,7 +225,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c14 0x14>;
interrupts = <9>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "okay";
};
@@ -234,7 +234,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c28 0x14>;
interrupts = <10>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -243,7 +243,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c3c 0x14>;
interrupts = <11>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -252,7 +252,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c50 0x14>;
interrupts = <12>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -261,7 +261,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c64 0x14>;
interrupts = <13>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -270,7 +270,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c78 0x14>;
interrupts = <14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -279,7 +279,7 @@
compatible = "snps,dw-apb-timer";
reg = <0x2c8c 0x14>;
interrupts = <15>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
@@ -297,9 +297,14 @@
chip: chip-controller@ea0000 {
compatible = "marvell,berlin2cd-chip-ctrl", "simple-mfd", "syscon";
reg = <0xea0000 0x400>;
- #clock-cells = <1>;
- clocks = <&refclk>;
- clock-names = "refclk";
+
+ chip_clk: clock {
+ compatible = "marvell,berlin2-clk";
+
+ #clock-cells = <1>;
+ clocks = <&refclk>;
+ clock-names = "refclk";
+ };
soc_pinctrl: pin-controller {
compatible = "marvell,berlin2cd-soc-pinctrl";
@@ -320,7 +325,7 @@
compatible = "chipidea,usb2";
reg = <0xed0000 0x200>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_USB0>;
+ clocks = <&chip_clk CLKID_USB0>;
phys = <&usb_phy0>;
phy-names = "usb-phy";
status = "disabled";
@@ -330,7 +335,7 @@
compatible = "chipidea,usb2";
reg = <0xee0000 0x200>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_USB1>;
+ clocks = <&chip_clk CLKID_USB1>;
phys = <&usb_phy1>;
phy-names = "usb-phy";
status = "disabled";
With the introduction of the Berlin mfd controller driver, all drivers previously sharing the chip and system controller nodes now have their own sub-node. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> --- arch/arm/boot/dts/berlin2cd.dtsi | 39 ++++++++++++++++++++++----------------- 1 file changed, 22 insertions(+), 17 deletions(-)