| Message ID | 1428638946-24890-4-git-send-email-wens@csie.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, 10 Apr 2015, Chen-Yu Tsai wrote: > From: Boris BREZILLON <boris.brezillon@free-electrons.com> > > Rework the AXP20X_ macros and probe function to support the several chip > families, so that each family can define it's own set of regulators. > > Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> > [wens@csie.org: Support different DC-DC work frequency ranges] > Signed-off-by: Chen-Yu Tsai <wens@csie.org> > Reviewed-by: Mark Brown <broonie@kernel.org> > --- > drivers/regulator/axp20x-regulator.c | 143 +++++++++++++++++++++++------------ > 1 file changed, 94 insertions(+), 49 deletions(-) Applied, thanks. > diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c > index e4331f5e5d7d..50ae0b5f2c0c 100644 > --- a/drivers/regulator/axp20x-regulator.c > +++ b/drivers/regulator/axp20x-regulator.c > @@ -32,15 +32,15 @@ > > #define AXP20X_FREQ_DCDC_MASK 0x0f > > -#define AXP20X_DESC_IO(_id, _match, _supply, _min, _max, _step, _vreg, _vmask, \ > - _ereg, _emask, _enable_val, _disable_val) \ > - [AXP20X_##_id] = { \ > +#define AXP_DESC_IO(_family, _id, _match, _supply, _min, _max, _step, _vreg, \ > + _vmask, _ereg, _emask, _enable_val, _disable_val) \ > + [_family##_##_id] = { \ > .name = #_id, \ > .supply_name = (_supply), \ > .of_match = of_match_ptr(_match), \ > .regulators_node = of_match_ptr("regulators"), \ > .type = REGULATOR_VOLTAGE, \ > - .id = AXP20X_##_id, \ > + .id = _family##_##_id, \ > .n_voltages = (((_max) - (_min)) / (_step) + 1), \ > .owner = THIS_MODULE, \ > .min_uV = (_min) * 1000, \ > @@ -54,15 +54,15 @@ > .ops = &axp20x_ops, \ > } > > -#define AXP20X_DESC(_id, _match, _supply, _min, _max, _step, _vreg, _vmask, \ > - _ereg, _emask) \ > - [AXP20X_##_id] = { \ > +#define AXP_DESC(_family, _id, _match, _supply, _min, _max, _step, _vreg, \ > + _vmask, _ereg, _emask) \ > + [_family##_##_id] = { \ > .name = #_id, \ > .supply_name = (_supply), \ > .of_match = of_match_ptr(_match), \ > .regulators_node = of_match_ptr("regulators"), \ > .type = REGULATOR_VOLTAGE, \ > - .id = AXP20X_##_id, \ > + .id = _family##_##_id, \ > .n_voltages = (((_max) - (_min)) / (_step) + 1), \ > .owner = THIS_MODULE, \ > .min_uV = (_min) * 1000, \ > @@ -74,29 +74,29 @@ > .ops = &axp20x_ops, \ > } > > -#define AXP20X_DESC_FIXED(_id, _match, _supply, _volt) \ > - [AXP20X_##_id] = { \ > +#define AXP_DESC_FIXED(_family, _id, _match, _supply, _volt) \ > + [_family##_##_id] = { \ > .name = #_id, \ > .supply_name = (_supply), \ > .of_match = of_match_ptr(_match), \ > .regulators_node = of_match_ptr("regulators"), \ > .type = REGULATOR_VOLTAGE, \ > - .id = AXP20X_##_id, \ > + .id = _family##_##_id, \ > .n_voltages = 1, \ > .owner = THIS_MODULE, \ > .min_uV = (_volt) * 1000, \ > .ops = &axp20x_ops_fixed \ > } > > -#define AXP20X_DESC_TABLE(_id, _match, _supply, _table, _vreg, _vmask, _ereg, \ > - _emask) \ > - [AXP20X_##_id] = { \ > +#define AXP_DESC_TABLE(_family, _id, _match, _supply, _table, _vreg, _vmask, \ > + _ereg, _emask) \ > + [_family##_##_id] = { \ > .name = #_id, \ > .supply_name = (_supply), \ > .of_match = of_match_ptr(_match), \ > .regulators_node = of_match_ptr("regulators"), \ > .type = REGULATOR_VOLTAGE, \ > - .id = AXP20X_##_id, \ > + .id = _family##_##_id, \ > .n_voltages = ARRAY_SIZE(_table), \ > .owner = THIS_MODULE, \ > .vsel_reg = (_vreg), \ > @@ -136,37 +136,57 @@ static struct regulator_ops axp20x_ops = { > }; > > static const struct regulator_desc axp20x_regulators[] = { > - AXP20X_DESC(DCDC2, "dcdc2", "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, > - 0x3f, AXP20X_PWR_OUT_CTRL, 0x10), > - AXP20X_DESC(DCDC3, "dcdc3", "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT, > - 0x7f, AXP20X_PWR_OUT_CTRL, 0x02), > - AXP20X_DESC_FIXED(LDO1, "ldo1", "acin", 1300), > - AXP20X_DESC(LDO2, "ldo2", "ldo24in", 1800, 3300, 100, > - AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04), > - AXP20X_DESC(LDO3, "ldo3", "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, > - 0x7f, AXP20X_PWR_OUT_CTRL, 0x40), > - AXP20X_DESC_TABLE(LDO4, "ldo4", "ldo24in", axp20x_ldo4_data, > - AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08), > - AXP20X_DESC_IO(LDO5, "ldo5", "ldo5in", 1800, 3300, 100, > - AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07, > - AXP20X_IO_ENABLED, AXP20X_IO_DISABLED), > + AXP_DESC(AXP20X, DCDC2, "dcdc2", "vin2", 700, 2275, 25, > + AXP20X_DCDC2_V_OUT, 0x3f, AXP20X_PWR_OUT_CTRL, 0x10), > + AXP_DESC(AXP20X, DCDC3, "dcdc3", "vin3", 700, 3500, 25, > + AXP20X_DCDC3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x02), > + AXP_DESC_FIXED(AXP20X, LDO1, "ldo1", "acin", 1300), > + AXP_DESC(AXP20X, LDO2, "ldo2", "ldo24in", 1800, 3300, 100, > + AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04), > + AXP_DESC(AXP20X, LDO3, "ldo3", "ldo3in", 700, 3500, 25, > + AXP20X_LDO3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x40), > + AXP_DESC_TABLE(AXP20X, LDO4, "ldo4", "ldo24in", axp20x_ldo4_data, > + AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08), > + AXP_DESC_IO(AXP20X, LDO5, "ldo5", "ldo5in", 1800, 3300, 100, > + AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07, > + AXP20X_IO_ENABLED, AXP20X_IO_DISABLED), > }; > > static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) > { > struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); > + u32 min, max, def, step; > + > + switch (axp20x->variant) { > + case AXP202_ID: > + case AXP209_ID: > + min = 750; > + max = 1875; > + def = 1500; > + step = 75; > + break; > + default: > + dev_err(&pdev->dev, > + "Setting DCDC frequency for unsupported AXP variant\n"); > + return -EINVAL; > + } > + > + if (dcdcfreq == 0) > + dcdcfreq = def; > > - if (dcdcfreq < 750) { > - dcdcfreq = 750; > - dev_warn(&pdev->dev, "DCDC frequency too low. Set to 750kHz\n"); > + if (dcdcfreq < min) { > + dcdcfreq = min; > + dev_warn(&pdev->dev, "DCDC frequency too low. Set to %ukHz\n", > + min); > } > > - if (dcdcfreq > 1875) { > - dcdcfreq = 1875; > - dev_warn(&pdev->dev, "DCDC frequency too high. Set to 1875kHz\n"); > + if (dcdcfreq > max) { > + dcdcfreq = max; > + dev_warn(&pdev->dev, "DCDC frequency too high. Set to %ukHz\n", > + max); > } > > - dcdcfreq = (dcdcfreq - 750) / 75; > + dcdcfreq = (dcdcfreq - min) / step; > > return regmap_update_bits(axp20x->regmap, AXP20X_DCDC_FREQ, > AXP20X_FREQ_DCDC_MASK, dcdcfreq); > @@ -176,7 +196,7 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev) > { > struct device_node *np, *regulators; > int ret; > - u32 dcdcfreq; > + u32 dcdcfreq = 0; > > np = of_node_get(pdev->dev.parent->of_node); > if (!np) > @@ -186,7 +206,6 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev) > if (!regulators) { > dev_warn(&pdev->dev, "regulators node not found\n"); > } else { > - dcdcfreq = 1500; > of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq); > ret = axp20x_set_dcdc_freq(pdev, dcdcfreq); > if (ret < 0) { > @@ -202,15 +221,27 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev) > > static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode) > { > - unsigned int mask = AXP20X_WORKMODE_DCDC2_MASK; > + struct axp20x_dev *axp20x = rdev_get_drvdata(rdev); > + unsigned int mask; > > - if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3)) > - return -EINVAL; > + switch (axp20x->variant) { > + case AXP202_ID: > + case AXP209_ID: > + if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3)) > + return -EINVAL; > + > + mask = AXP20X_WORKMODE_DCDC2_MASK; > + if (id == AXP20X_DCDC3) > + mask = AXP20X_WORKMODE_DCDC3_MASK; > > - if (id == AXP20X_DCDC3) > - mask = AXP20X_WORKMODE_DCDC3_MASK; > + workmode <<= ffs(mask) - 1; > + break; > > - workmode <<= ffs(mask) - 1; > + default: > + /* should not happen */ > + WARN_ON(1); > + return -EINVAL; > + } > > return regmap_update_bits(rdev->regmap, AXP20X_DCDC_MODE, mask, workmode); > } > @@ -219,22 +250,36 @@ static int axp20x_regulator_probe(struct platform_device *pdev) > { > struct regulator_dev *rdev; > struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); > + const struct regulator_desc *regulators; > struct regulator_config config = { > .dev = pdev->dev.parent, > .regmap = axp20x->regmap, > + .driver_data = axp20x, > }; > - int ret, i; > + int ret, i, nregulators; > u32 workmode; > > + switch (axp20x->variant) { > + case AXP202_ID: > + case AXP209_ID: > + regulators = axp20x_regulators; > + nregulators = AXP20X_REG_ID_MAX; > + break; > + default: > + dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n", > + axp20x->variant); > + return -EINVAL; > + } > + > /* This only sets the dcdc freq. Ignore any errors */ > axp20x_regulator_parse_dt(pdev); > > - for (i = 0; i < AXP20X_REG_ID_MAX; i++) { > - rdev = devm_regulator_register(&pdev->dev, &axp20x_regulators[i], > + for (i = 0; i < nregulators; i++) { > + rdev = devm_regulator_register(&pdev->dev, ®ulators[i], > &config); > if (IS_ERR(rdev)) { > dev_err(&pdev->dev, "Failed to register %s\n", > - axp20x_regulators[i].name); > + regulators[i].name); > > return PTR_ERR(rdev); > } > @@ -245,7 +290,7 @@ static int axp20x_regulator_probe(struct platform_device *pdev) > if (!ret) { > if (axp20x_set_dcdc_workmode(rdev, i, workmode)) > dev_err(&pdev->dev, "Failed to set workmode on %s\n", > - axp20x_regulators[i].name); > + rdev->desc->name); > } > } >
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index e4331f5e5d7d..50ae0b5f2c0c 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -32,15 +32,15 @@ #define AXP20X_FREQ_DCDC_MASK 0x0f -#define AXP20X_DESC_IO(_id, _match, _supply, _min, _max, _step, _vreg, _vmask, \ - _ereg, _emask, _enable_val, _disable_val) \ - [AXP20X_##_id] = { \ +#define AXP_DESC_IO(_family, _id, _match, _supply, _min, _max, _step, _vreg, \ + _vmask, _ereg, _emask, _enable_val, _disable_val) \ + [_family##_##_id] = { \ .name = #_id, \ .supply_name = (_supply), \ .of_match = of_match_ptr(_match), \ .regulators_node = of_match_ptr("regulators"), \ .type = REGULATOR_VOLTAGE, \ - .id = AXP20X_##_id, \ + .id = _family##_##_id, \ .n_voltages = (((_max) - (_min)) / (_step) + 1), \ .owner = THIS_MODULE, \ .min_uV = (_min) * 1000, \ @@ -54,15 +54,15 @@ .ops = &axp20x_ops, \ } -#define AXP20X_DESC(_id, _match, _supply, _min, _max, _step, _vreg, _vmask, \ - _ereg, _emask) \ - [AXP20X_##_id] = { \ +#define AXP_DESC(_family, _id, _match, _supply, _min, _max, _step, _vreg, \ + _vmask, _ereg, _emask) \ + [_family##_##_id] = { \ .name = #_id, \ .supply_name = (_supply), \ .of_match = of_match_ptr(_match), \ .regulators_node = of_match_ptr("regulators"), \ .type = REGULATOR_VOLTAGE, \ - .id = AXP20X_##_id, \ + .id = _family##_##_id, \ .n_voltages = (((_max) - (_min)) / (_step) + 1), \ .owner = THIS_MODULE, \ .min_uV = (_min) * 1000, \ @@ -74,29 +74,29 @@ .ops = &axp20x_ops, \ } -#define AXP20X_DESC_FIXED(_id, _match, _supply, _volt) \ - [AXP20X_##_id] = { \ +#define AXP_DESC_FIXED(_family, _id, _match, _supply, _volt) \ + [_family##_##_id] = { \ .name = #_id, \ .supply_name = (_supply), \ .of_match = of_match_ptr(_match), \ .regulators_node = of_match_ptr("regulators"), \ .type = REGULATOR_VOLTAGE, \ - .id = AXP20X_##_id, \ + .id = _family##_##_id, \ .n_voltages = 1, \ .owner = THIS_MODULE, \ .min_uV = (_volt) * 1000, \ .ops = &axp20x_ops_fixed \ } -#define AXP20X_DESC_TABLE(_id, _match, _supply, _table, _vreg, _vmask, _ereg, \ - _emask) \ - [AXP20X_##_id] = { \ +#define AXP_DESC_TABLE(_family, _id, _match, _supply, _table, _vreg, _vmask, \ + _ereg, _emask) \ + [_family##_##_id] = { \ .name = #_id, \ .supply_name = (_supply), \ .of_match = of_match_ptr(_match), \ .regulators_node = of_match_ptr("regulators"), \ .type = REGULATOR_VOLTAGE, \ - .id = AXP20X_##_id, \ + .id = _family##_##_id, \ .n_voltages = ARRAY_SIZE(_table), \ .owner = THIS_MODULE, \ .vsel_reg = (_vreg), \ @@ -136,37 +136,57 @@ static struct regulator_ops axp20x_ops = { }; static const struct regulator_desc axp20x_regulators[] = { - AXP20X_DESC(DCDC2, "dcdc2", "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, - 0x3f, AXP20X_PWR_OUT_CTRL, 0x10), - AXP20X_DESC(DCDC3, "dcdc3", "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT, - 0x7f, AXP20X_PWR_OUT_CTRL, 0x02), - AXP20X_DESC_FIXED(LDO1, "ldo1", "acin", 1300), - AXP20X_DESC(LDO2, "ldo2", "ldo24in", 1800, 3300, 100, - AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04), - AXP20X_DESC(LDO3, "ldo3", "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, - 0x7f, AXP20X_PWR_OUT_CTRL, 0x40), - AXP20X_DESC_TABLE(LDO4, "ldo4", "ldo24in", axp20x_ldo4_data, - AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08), - AXP20X_DESC_IO(LDO5, "ldo5", "ldo5in", 1800, 3300, 100, - AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07, - AXP20X_IO_ENABLED, AXP20X_IO_DISABLED), + AXP_DESC(AXP20X, DCDC2, "dcdc2", "vin2", 700, 2275, 25, + AXP20X_DCDC2_V_OUT, 0x3f, AXP20X_PWR_OUT_CTRL, 0x10), + AXP_DESC(AXP20X, DCDC3, "dcdc3", "vin3", 700, 3500, 25, + AXP20X_DCDC3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x02), + AXP_DESC_FIXED(AXP20X, LDO1, "ldo1", "acin", 1300), + AXP_DESC(AXP20X, LDO2, "ldo2", "ldo24in", 1800, 3300, 100, + AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04), + AXP_DESC(AXP20X, LDO3, "ldo3", "ldo3in", 700, 3500, 25, + AXP20X_LDO3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x40), + AXP_DESC_TABLE(AXP20X, LDO4, "ldo4", "ldo24in", axp20x_ldo4_data, + AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08), + AXP_DESC_IO(AXP20X, LDO5, "ldo5", "ldo5in", 1800, 3300, 100, + AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07, + AXP20X_IO_ENABLED, AXP20X_IO_DISABLED), }; static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) { struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); + u32 min, max, def, step; + + switch (axp20x->variant) { + case AXP202_ID: + case AXP209_ID: + min = 750; + max = 1875; + def = 1500; + step = 75; + break; + default: + dev_err(&pdev->dev, + "Setting DCDC frequency for unsupported AXP variant\n"); + return -EINVAL; + } + + if (dcdcfreq == 0) + dcdcfreq = def; - if (dcdcfreq < 750) { - dcdcfreq = 750; - dev_warn(&pdev->dev, "DCDC frequency too low. Set to 750kHz\n"); + if (dcdcfreq < min) { + dcdcfreq = min; + dev_warn(&pdev->dev, "DCDC frequency too low. Set to %ukHz\n", + min); } - if (dcdcfreq > 1875) { - dcdcfreq = 1875; - dev_warn(&pdev->dev, "DCDC frequency too high. Set to 1875kHz\n"); + if (dcdcfreq > max) { + dcdcfreq = max; + dev_warn(&pdev->dev, "DCDC frequency too high. Set to %ukHz\n", + max); } - dcdcfreq = (dcdcfreq - 750) / 75; + dcdcfreq = (dcdcfreq - min) / step; return regmap_update_bits(axp20x->regmap, AXP20X_DCDC_FREQ, AXP20X_FREQ_DCDC_MASK, dcdcfreq); @@ -176,7 +196,7 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev) { struct device_node *np, *regulators; int ret; - u32 dcdcfreq; + u32 dcdcfreq = 0; np = of_node_get(pdev->dev.parent->of_node); if (!np) @@ -186,7 +206,6 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev) if (!regulators) { dev_warn(&pdev->dev, "regulators node not found\n"); } else { - dcdcfreq = 1500; of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq); ret = axp20x_set_dcdc_freq(pdev, dcdcfreq); if (ret < 0) { @@ -202,15 +221,27 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev) static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode) { - unsigned int mask = AXP20X_WORKMODE_DCDC2_MASK; + struct axp20x_dev *axp20x = rdev_get_drvdata(rdev); + unsigned int mask; - if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3)) - return -EINVAL; + switch (axp20x->variant) { + case AXP202_ID: + case AXP209_ID: + if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3)) + return -EINVAL; + + mask = AXP20X_WORKMODE_DCDC2_MASK; + if (id == AXP20X_DCDC3) + mask = AXP20X_WORKMODE_DCDC3_MASK; - if (id == AXP20X_DCDC3) - mask = AXP20X_WORKMODE_DCDC3_MASK; + workmode <<= ffs(mask) - 1; + break; - workmode <<= ffs(mask) - 1; + default: + /* should not happen */ + WARN_ON(1); + return -EINVAL; + } return regmap_update_bits(rdev->regmap, AXP20X_DCDC_MODE, mask, workmode); } @@ -219,22 +250,36 @@ static int axp20x_regulator_probe(struct platform_device *pdev) { struct regulator_dev *rdev; struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); + const struct regulator_desc *regulators; struct regulator_config config = { .dev = pdev->dev.parent, .regmap = axp20x->regmap, + .driver_data = axp20x, }; - int ret, i; + int ret, i, nregulators; u32 workmode; + switch (axp20x->variant) { + case AXP202_ID: + case AXP209_ID: + regulators = axp20x_regulators; + nregulators = AXP20X_REG_ID_MAX; + break; + default: + dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n", + axp20x->variant); + return -EINVAL; + } + /* This only sets the dcdc freq. Ignore any errors */ axp20x_regulator_parse_dt(pdev); - for (i = 0; i < AXP20X_REG_ID_MAX; i++) { - rdev = devm_regulator_register(&pdev->dev, &axp20x_regulators[i], + for (i = 0; i < nregulators; i++) { + rdev = devm_regulator_register(&pdev->dev, ®ulators[i], &config); if (IS_ERR(rdev)) { dev_err(&pdev->dev, "Failed to register %s\n", - axp20x_regulators[i].name); + regulators[i].name); return PTR_ERR(rdev); } @@ -245,7 +290,7 @@ static int axp20x_regulator_probe(struct platform_device *pdev) if (!ret) { if (axp20x_set_dcdc_workmode(rdev, i, workmode)) dev_err(&pdev->dev, "Failed to set workmode on %s\n", - axp20x_regulators[i].name); + rdev->desc->name); } }