diff mbox

[RFC,v2,4/4] arm64: qcom: add cpu operations

Message ID 1428698605-13166-5-git-send-email-galak@codeaurora.org (mailing list archive)
State New, archived
Headers show

Commit Message

Kumar Gala April 10, 2015, 8:43 p.m. UTC
From: Abhimanyu Kapur <abhimany@codeaurora.org>

Add qcom cpu operations for arm-v8 cpus. Implement secondary cpu boot ops
As a part of this change update device tree documentation for:

1. Arm cortex-a ACC device which provides percpu reg
2. Armv8 cortex-a compatible string in arm/cpus.txt

Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
---
 Documentation/devicetree/bindings/arm/cpus.txt     |   2 +
 Documentation/devicetree/bindings/arm/msm/acc.txt  |  19 ++
 arch/arm64/kernel/Makefile                         |   3 +
 arch/arm64/kernel/cpu_ops.c                        |   4 +
 .../kernel/qcom-special-cpu-ops-dont-copy-this.c   | 329 +++++++++++++++++++++
 5 files changed, 357 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/msm/acc.txt
 create mode 100644 arch/arm64/kernel/qcom-special-cpu-ops-dont-copy-this.c

Comments

Arnd Bergmann April 10, 2015, 8:57 p.m. UTC | #1
On Friday 10 April 2015 15:43:25 Kumar Gala wrote:
> +static int qcom_cpu_boot(unsigned int cpu)
> +{
> +       int ret = 0;
> +
> +       if (per_cpu(cold_boot_done, cpu) == false) {
> +               ret = qcom_unclamp_secondary_arm_cpu(cpu);
> +               if (ret)
> +                       return ret;
> +               per_cpu(cold_boot_done, cpu) = true;
> +       }
> +       return secondary_pen_release(cpu);
> +}
> +

Please add a comment here to explain why you need a two-stage process here,
rather than just booting the CPU without the secondary_pen.

Are you working around a specific silicon bug here?

	Arnd
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 8b9e0a9..35cabe5 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -185,6 +185,8 @@  nodes to be present and contain the properties described below.
 			  be one of:
 			     "psci"
 			     "spin-table"
+			     "qcom,arm-cortex-acc"
+
 			# On ARM 32-bit systems this property is optional and
 			  can be one of:
 			    "allwinner,sun6i-a31"
diff --git a/Documentation/devicetree/bindings/arm/msm/acc.txt b/Documentation/devicetree/bindings/arm/msm/acc.txt
new file mode 100644
index 0000000..ae2d725
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/acc.txt
@@ -0,0 +1,19 @@ 
+Application Processor Sub-system (APSS) Application Clock Controller (ACC)
+
+The ACC provides clock, power domain, and reset control to a CPU. There is one ACC
+register region per CPU within the APSS remapped region as well as an alias register
+region that remaps accesses to the ACC associated with the CPU accessing the region.
+
+Required properties:
+- compatible:		Must be "qcom,arm-cortex-acc"
+- reg:			The first element specifies the base address and size of
+			the register region. An optional second element specifies
+			the base address and size of the alias register region.
+
+Example:
+
+	clock-controller@b088000 {
+		compatible = "qcom,arm-cortex-acc";
+		reg = <0x0b088000 0x1000>,
+		      <0x0b008000 0x1000>;
+	}
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 5ee07ee..8d77ac5 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -25,6 +25,9 @@  arm64-obj-$(CONFIG_COMPAT)		+= sys32.o kuser32.o signal32.o 	\
 arm64-obj-$(CONFIG_FUNCTION_TRACER)	+= ftrace.o entry-ftrace.o
 arm64-obj-$(CONFIG_MODULES)		+= arm64ksyms.o module.o
 arm64-obj-$(CONFIG_SMP)			+= smp.o smp_spin_table.o topology.o
+ifdef CONFIG_SMP
+arm64-obj-$(CONFIG_ARCH_QCOM)		+= qcom-special-cpu-ops-dont-copy-this.o
+endif
 arm64-obj-$(CONFIG_PERF_EVENTS)		+= perf_regs.o
 arm64-obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o
 arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
diff --git a/arch/arm64/kernel/cpu_ops.c b/arch/arm64/kernel/cpu_ops.c
index cce9524..d002168 100644
--- a/arch/arm64/kernel/cpu_ops.c
+++ b/arch/arm64/kernel/cpu_ops.c
@@ -24,6 +24,7 @@ 
 
 extern const struct cpu_operations smp_spin_table_ops;
 extern const struct cpu_operations cpu_psci_ops;
+extern const struct cpu_operations qcom_cortex_a_ops;
 
 const struct cpu_operations *cpu_ops[NR_CPUS];
 
@@ -32,6 +33,9 @@  static const struct cpu_operations *supported_cpu_ops[] __initconst = {
 	&smp_spin_table_ops,
 #endif
 	&cpu_psci_ops,
+#ifdef CONFIG_ARCH_QCOM
+	&qcom_cortex_a_ops,
+#endif
 	NULL,
 };
 
diff --git a/arch/arm64/kernel/qcom-special-cpu-ops-dont-copy-this.c b/arch/arm64/kernel/qcom-special-cpu-ops-dont-copy-this.c
new file mode 100644
index 0000000..11995d6
--- /dev/null
+++ b/arch/arm64/kernel/qcom-special-cpu-ops-dont-copy-this.c
@@ -0,0 +1,329 @@ 
+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2013 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/* MSM ARMv8 CPU Operations
+ * Based on arch/arm64/kernel/smp_spin_table.c
+ */
+
+#include <linux/bitops.h>
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/smp.h>
+#include <linux/qcom_scm.h>
+
+#include <asm/barrier.h>
+#include <asm/cacheflush.h>
+#include <asm/cpu_ops.h>
+#include <asm/cputype.h>
+#include <asm/smp_plat.h>
+
+static DEFINE_RAW_SPINLOCK(boot_lock);
+
+DEFINE_PER_CPU(int, cold_boot_done);
+
+/* CPU power domain register offsets */
+#define CPU_PWR_CTL		0x4
+#define CPU_PWR_GATE_CTL	0x14
+#define LDO_BHS_PWR_CTL		0x28
+
+/* L2 power domain register offsets */
+#define L2_PWR_CTL_OVERRIDE	0xc
+#define L2_PWR_CTL		0x14
+#define L2_PWR_STATUS		0x18
+#define	L2_CORE_CBCR		0x58
+#define L1_RST_DIS		0x284
+
+#define L2_SPM_STS		0xc
+#define L2_VREG_CTL		0x1c
+
+/*
+ * struct qcom_l2ccc_of_info: represents of data for l2 cache clock controller.
+ * @compat: compat string for l2 cache clock controller
+ * @l2_pon: l2 cache power on routine
+ */
+struct qcom_l2ccc_of_info {
+	const char *compat;
+	int (*l2_power_on) (struct device_node *dn, u32 l2_mask, int cpu);
+	u32 l2_power_on_mask;
+};
+
+static int power_on_l2_msm8916(struct device_node *l2ccc_node, u32 pon_mask,
+				int cpu)
+{
+	u32 pon_status;
+	void __iomem *l2_base;
+
+	l2_base = of_iomap(l2ccc_node, 0);
+	if (!l2_base)
+		return -ENOMEM;
+
+	/* Skip power-on sequence if l2 cache is already powered up*/
+	pon_status = (__raw_readl(l2_base + L2_PWR_STATUS) & pon_mask)
+				== pon_mask;
+	if (pon_status) {
+		iounmap(l2_base);
+		return 0;
+	}
+
+	/* Close L2/SCU Logic GDHS and power up the cache */
+	writel_relaxed(0x10D700, l2_base + L2_PWR_CTL);
+
+	/* Assert PRESETDBGn */
+	writel_relaxed(0x400000, l2_base + L2_PWR_CTL_OVERRIDE);
+	mb();
+	udelay(2);
+
+	/* De-assert L2/SCU memory Clamp */
+	writel_relaxed(0x101700, l2_base + L2_PWR_CTL);
+
+	/* Wakeup L2/SCU RAMs by deasserting sleep signals */
+	writel_relaxed(0x101703, l2_base + L2_PWR_CTL);
+	mb();
+	udelay(2);
+
+	/* Enable clocks via SW_CLK_EN */
+	writel_relaxed(0x01, l2_base + L2_CORE_CBCR);
+
+	/* De-assert L2/SCU logic clamp */
+	writel_relaxed(0x101603, l2_base + L2_PWR_CTL);
+	mb();
+	udelay(2);
+
+	/* De-assert PRESSETDBg */
+	writel_relaxed(0x0, l2_base + L2_PWR_CTL_OVERRIDE);
+
+	/* De-assert L2/SCU Logic reset */
+	writel_relaxed(0x100203, l2_base + L2_PWR_CTL);
+	mb();
+	udelay(54);
+
+	/* Turn on the PMIC_APC */
+	writel_relaxed(0x10100203, l2_base + L2_PWR_CTL);
+
+	/* Set H/W clock control for the cpu CBC block */
+	writel_relaxed(0x03, l2_base + L2_CORE_CBCR);
+	mb();
+	iounmap(l2_base);
+
+	return 0;
+}
+
+static const struct qcom_l2ccc_of_info l2ccc_info[] = {
+	{
+		.compat = "qcom,8916-l2ccc",
+		.l2_power_on = power_on_l2_msm8916,
+		.l2_power_on_mask = BIT(9),
+	},
+};
+
+static int power_on_l2_cache(struct device_node *l2ccc_node, int cpu)
+{
+	int ret, i;
+	const char *compat;
+
+	ret = of_property_read_string(l2ccc_node, "compatible", &compat);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(l2ccc_info); i++) {
+		const struct qcom_l2ccc_of_info *ptr = &l2ccc_info[i];
+
+		if (!of_compat_cmp(ptr->compat, compat, strlen(compat)))
+				return ptr->l2_power_on(l2ccc_node,
+						ptr->l2_power_on_mask, cpu);
+	}
+	pr_err("Compat string not found for L2CCC node\n");
+	return -EIO;
+}
+
+static int qcom_unclamp_secondary_arm_cpu(unsigned int cpu)
+{
+
+	int ret = 0;
+	struct device_node *cpu_node, *acc_node, *l2_node, *l2ccc_node;
+	void __iomem *reg;
+
+	cpu_node = of_get_cpu_node(cpu, NULL);
+	if (!cpu_node)
+		return -ENODEV;
+
+	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
+	if (!acc_node) {
+			ret = -ENODEV;
+			goto out_acc;
+	}
+
+	l2_node = of_parse_phandle(cpu_node, "next-level-cache", 0);
+	if (!l2_node) {
+		ret = -ENODEV;
+		goto out_l2;
+	}
+
+	l2ccc_node = of_parse_phandle(l2_node, "power-domain", 0);
+	if (!l2ccc_node) {
+		ret = -ENODEV;
+		goto out_l2;
+	}
+
+	/* Ensure L2-cache of the CPU is powered on before
+	 * unclamping cpu power rails.
+	 */
+	ret = power_on_l2_cache(l2ccc_node, cpu);
+	if (ret) {
+		pr_err("L2 cache power up failed for CPU%d\n", cpu);
+		goto out_l2ccc;
+	}
+
+	reg = of_iomap(acc_node, 0);
+	if (!reg) {
+		ret = -ENOMEM;
+		goto out_acc_reg;
+	}
+
+	/* Assert Reset on cpu-n */
+	writel_relaxed(0x00000033, reg + CPU_PWR_CTL);
+	mb();
+
+	/*Program skew to 16 X0 clock cycles*/
+	writel_relaxed(0x10000001, reg + CPU_PWR_GATE_CTL);
+	mb();
+	udelay(2);
+
+	/* De-assert coremem clamp */
+	writel_relaxed(0x00000031, reg + CPU_PWR_CTL);
+	mb();
+
+	/* Close coremem array gdhs */
+	writel_relaxed(0x00000039, reg + CPU_PWR_CTL);
+	mb();
+	udelay(2);
+
+	/* De-assert cpu-n clamp */
+	writel_relaxed(0x00020038, reg + CPU_PWR_CTL);
+	mb();
+	udelay(2);
+
+	/* De-assert cpu-n reset */
+	writel_relaxed(0x00020008, reg + CPU_PWR_CTL);
+	mb();
+
+	/* Assert PWRDUP signal on core-n */
+	writel_relaxed(0x00020088, reg + CPU_PWR_CTL);
+	mb();
+
+	/* Secondary CPU-N is now alive */
+	iounmap(reg);
+out_acc_reg:
+	of_node_put(l2ccc_node);
+out_l2ccc:
+	of_node_put(l2_node);
+out_l2:
+	of_node_put(acc_node);
+out_acc:
+	of_node_put(cpu_node);
+
+	return ret;
+}
+
+static void write_pen_release(u64 val)
+{
+	void *start = (void *)&secondary_holding_pen_release;
+	unsigned long size = sizeof(secondary_holding_pen_release);
+
+	secondary_holding_pen_release = val;
+	smp_wmb();
+	__flush_dcache_area(start, size);
+}
+
+static int secondary_pen_release(unsigned int cpu)
+{
+	unsigned long timeout;
+
+	/*
+	 * Set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	raw_spin_lock(&boot_lock);
+	write_pen_release(cpu_logical_map(cpu));
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		if (secondary_holding_pen_release == INVALID_HWID)
+			break;
+		udelay(10);
+	}
+	raw_spin_unlock(&boot_lock);
+
+	return secondary_holding_pen_release != INVALID_HWID ? -ENOSYS : 0;
+}
+
+static int __init qcom_cpu_init(struct device_node *dn, unsigned int cpu)
+{
+	/* Mark CPU0 cold boot flag as done */
+	if (!cpu && !per_cpu(cold_boot_done, cpu))
+		per_cpu(cold_boot_done, cpu) = true;
+
+	return 0;
+}
+
+static int __init qcom_cpu_prepare(unsigned int cpu)
+{
+	const cpumask_t *mask = cpumask_of(cpu);
+
+	if (qcom_scm_set_cold_boot_addr(secondary_holding_pen, mask)) {
+		pr_warn("CPU%d:Failed to set boot address\n", cpu);
+		return -ENOSYS;
+	}
+
+	return 0;
+}
+
+static int qcom_cpu_boot(unsigned int cpu)
+{
+	int ret = 0;
+
+	if (per_cpu(cold_boot_done, cpu) == false) {
+		ret = qcom_unclamp_secondary_arm_cpu(cpu);
+		if (ret)
+			return ret;
+		per_cpu(cold_boot_done, cpu) = true;
+	}
+	return secondary_pen_release(cpu);
+}
+
+void qcom_cpu_postboot(void)
+{
+	/*
+	 * Let the primary processor know we're out of the pen.
+	 */
+	write_pen_release(INVALID_HWID);
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	raw_spin_lock(&boot_lock);
+	raw_spin_unlock(&boot_lock);
+}
+
+const struct cpu_operations qcom_cortex_a_ops = {
+	.name		= "qcom,arm-cortex-acc",
+	.cpu_init	= qcom_cpu_init,
+	.cpu_prepare	= qcom_cpu_prepare,
+	.cpu_boot	= qcom_cpu_boot,
+	.cpu_postboot	= qcom_cpu_postboot,
+};