diff mbox

ARM: dts: imx6: phyFLEX: USB VBUS control is active-high

Message ID 1429624793-16223-1-git-send-email-p.zabel@pengutronix.de (mailing list archive)
State New, archived
Headers show

Commit Message

Philipp Zabel April 21, 2015, 1:59 p.m. UTC 
The fixed-regulator bindings require a separate property enable-active-high,
the standard gpio phandle property polarity setting is ignored.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 2 ++
 1 file changed, 2 insertions(+)

Comments

Shawn Guo April 27, 2015, 2:21 p.m. UTC | #1 
On Tue, Apr 21, 2015 at 03:59:53PM +0200, Philipp Zabel wrote:
> The fixed-regulator bindings require a separate property enable-active-high,
> the standard gpio phandle property polarity setting is ignored.
> 
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Applied, thanks.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 19cc269..1ce6133 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -31,6 +31,7 @@ 
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio4 15 0>;
+			enable-active-high;
 		};
 
 		reg_usb_h1_vbus: regulator@1 {
@@ -40,6 +41,7 @@ 
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio1 0 0>;
+			enable-active-high;
 		};
 	};