diff mbox

[1/9] dt-bindings: Add root properties for Raspberry Pi 2.

Message ID 1429639796-2169-2-git-send-email-eric@anholt.net (mailing list archive)
State New, archived
Headers show

Commit Message

Eric Anholt April 21, 2015, 6:09 p.m. UTC
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 Documentation/devicetree/bindings/arm/bcm2836.txt | 10 ++++++++++
 1 file changed, 10 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/bcm2836.txt

Comments

Stephen Warren April 24, 2015, 4:27 a.m. UTC | #1
On 04/21/2015 12:09 PM, Eric Anholt wrote:
> Signed-off-by: Eric Anholt <eric@anholt.net>
> ---
>  Documentation/devicetree/bindings/arm/bcm2836.txt | 10 ++++++++++

In next-20150423 at least, the bcm2835 equivalent of this file is:
Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt

The file added by this patch should be named consistently. I might be
tempted to put the new values into the existing file?
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/arm/bcm2836.txt b/Documentation/devicetree/bindings/arm/bcm2836.txt
new file mode 100644
index 0000000..5e255ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm2836.txt
@@ -0,0 +1,10 @@ 
+Broadcom BCM2836 device tree bindings
+-------------------------------------------
+
+Raspberry Pi 2 Model B
+Required root node properties:
+compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
+
+Generic BCM2836 board
+Required root node properties:
+compatible = "brcm,bcm2836";