diff mbox

[v2,3/5] mfd: sun6i-prcm: Add support for PRCM found on Allwinner A80 SoC

Message ID 1430410206-4410-4-git-send-email-wens@csie.org (mailing list archive)
State New, archived
Headers show

Commit Message

Chen-Yu Tsai April 30, 2015, 4:10 p.m. UTC
This patch adds support for the PRCM on the A80 SoC. There is little
to no document for this at the moment. Only register offsets are
available. However with some testing, the clock and reset controls
seem to be the similar to the ones on the A31.

One thing that needs verifying is whether the apbs divider is the same
as the A31 or the A23. The lowest divider is different between those
2 implementations.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 .../devicetree/bindings/mfd/sun6i-prcm.txt         |  3 +-
 drivers/mfd/sun6i-prcm.c                           | 58 ++++++++++++++++++++++
 2 files changed, 60 insertions(+), 1 deletion(-)

Comments

Maxime Ripard May 4, 2015, 12:53 p.m. UTC | #1
On Fri, May 01, 2015 at 12:10:04AM +0800, Chen-Yu Tsai wrote:
> This patch adds support for the PRCM on the A80 SoC. There is little
> to no document for this at the moment. Only register offsets are
> available. However with some testing, the clock and reset controls
> seem to be the similar to the ones on the A31.
> 
> One thing that needs verifying is whether the apbs divider is the same
> as the A31 or the A23. The lowest divider is different between those
> 2 implementations.

Is this commit log still true now that we have access to documentation
the PRCM?

Thanks,
Maxime
Chen-Yu Tsai May 4, 2015, 3:15 p.m. UTC | #2
On Mon, May 4, 2015 at 8:53 PM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> On Fri, May 01, 2015 at 12:10:04AM +0800, Chen-Yu Tsai wrote:
>> This patch adds support for the PRCM on the A80 SoC. There is little
>> to no document for this at the moment. Only register offsets are
>> available. However with some testing, the clock and reset controls
>> seem to be the similar to the ones on the A31.
>>
>> One thing that needs verifying is whether the apbs divider is the same
>> as the A31 or the A23. The lowest divider is different between those
>> 2 implementations.
>
> Is this commit log still true now that we have access to documentation
> the PRCM?

Oops, forgot to update this one....

We have all documentation concerning the clocks.

ChenYu
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
index 03c5a551da55..c100abfcb2a4 100644
--- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
+++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
@@ -4,7 +4,8 @@  PRCM is an MFD device exposing several Power Management related devices
 (like clks and reset controllers).
 
 Required properties:
- - compatible: "allwinner,sun6i-a31-prcm" or "allwinner,sun8i-a23-prcm"
+ - compatible: "allwinner,sun6i-a31-prcm", "allwinner,sun8i-a23-prcm",
+	       "allwinner,sun9i-a80-prcm"
  - reg: The PRCM registers range
 
 The prcm node may contain several subdevices definitions:
diff --git a/drivers/mfd/sun6i-prcm.c b/drivers/mfd/sun6i-prcm.c
index 191173166d65..e56344f04066 100644
--- a/drivers/mfd/sun6i-prcm.c
+++ b/drivers/mfd/sun6i-prcm.c
@@ -33,6 +33,22 @@  static const struct resource sun6i_a31_apb0_clk_res[] = {
 	},
 };
 
+static const struct resource sun9i_a80_cpus_clk_res[] = {
+	{
+		.start = 0x10,
+		.end = 0x13,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static const struct resource sun9i_a80_apbs_clk_res[] = {
+	{
+		.start = 0x1c,
+		.end = 0x1f,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
 static const struct resource sun6i_a31_apb0_gates_clk_res[] = {
 	{
 		.start = 0x28,
@@ -111,6 +127,39 @@  static const struct mfd_cell sun8i_a23_prcm_subdevs[] = {
 	},
 };
 
+static const struct mfd_cell sun9i_a80_prcm_subdevs[] = {
+	{
+		.name = "sun9i-a80-cpus-clk",
+		.of_compatible = "allwinner,sun9i-a80-cpus-clk",
+		.num_resources = ARRAY_SIZE(sun9i_a80_cpus_clk_res),
+		.resources = sun9i_a80_cpus_clk_res,
+	},
+	{
+		.name = "sun9i-a80-apbs-clk",
+		.of_compatible = "allwinner,sun8i-a23-apb0-clk",
+		.num_resources = ARRAY_SIZE(sun9i_a80_apbs_clk_res),
+		.resources = sun9i_a80_apbs_clk_res,
+	},
+	{
+		.name = "sun9i-a80-apbs-gates-clk",
+		.of_compatible = "allwinner,sun9i-a80-apbs-gates-clk",
+		.num_resources = ARRAY_SIZE(sun6i_a31_apb0_gates_clk_res),
+		.resources = sun6i_a31_apb0_gates_clk_res,
+	},
+	{
+		.name = "sun9i-a80-r-ir-clk",
+		.of_compatible = "allwinner,sun4i-a10-mod0-clk",
+		.num_resources = ARRAY_SIZE(sun6i_a31_ir_clk_res),
+		.resources = sun6i_a31_ir_clk_res,
+	},
+	{
+		.name = "sun9i-a80-apbs-clock-reset",
+		.of_compatible = "allwinner,sun6i-a31-clock-reset",
+		.num_resources = ARRAY_SIZE(sun6i_a31_apb0_rstc_res),
+		.resources = sun6i_a31_apb0_rstc_res,
+	},
+};
+
 static const struct prcm_data sun6i_a31_prcm_data = {
 	.nsubdevs = ARRAY_SIZE(sun6i_a31_prcm_subdevs),
 	.subdevs = sun6i_a31_prcm_subdevs,
@@ -121,6 +170,11 @@  static const struct prcm_data sun8i_a23_prcm_data = {
 	.subdevs = sun8i_a23_prcm_subdevs,
 };
 
+static const struct prcm_data sun9i_a80_prcm_data = {
+	.nsubdevs = ARRAY_SIZE(sun9i_a80_prcm_subdevs),
+	.subdevs = sun9i_a80_prcm_subdevs,
+};
+
 static const struct of_device_id sun6i_prcm_dt_ids[] = {
 	{
 		.compatible = "allwinner,sun6i-a31-prcm",
@@ -130,6 +184,10 @@  static const struct of_device_id sun6i_prcm_dt_ids[] = {
 		.compatible = "allwinner,sun8i-a23-prcm",
 		.data = &sun8i_a23_prcm_data,
 	},
+	{
+		.compatible = "allwinner,sun9i-a80-prcm",
+		.data = &sun9i_a80_prcm_data,
+	},
 	{ /* sentinel */ },
 };