diff mbox

[v3,5/5] ARM: dts: brcmstb: add nodes for SATA controller and PHY

Message ID 1431473303-18873-6-git-send-email-computersforpeace@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Brian Norris May 12, 2015, 11:28 p.m. UTC
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
v3: no change

v2:
  - fix up some typos
  - account for binding changes in previous patches

 arch/arm/boot/dts/bcm7445.dtsi | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

Comments

Florian Fainelli May 13, 2015, 6:02 p.m. UTC | #1
On 12/05/15 16:28, Brian Norris wrote:
> Signed-off-by: Brian Norris <computersforpeace@gmail.com>

Applied to devicetree/next, thanks!
diff mbox

Patch

diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
index 39ac7840d7ee..ce44a211b05c 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -108,6 +108,43 @@ 
 			brcm,int-map-mask = <0x25c>, <0x7000000>;
 			brcm,int-fwd-mask = <0x70000>;
 		};
+
+		sata@45a000 {
+			compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x45a000 0xa9c>, <0x458040 0x24>;
+			interrupts = <GIC_SPI 30 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+			};
+		};
+
+		sata_phy: sata-phy@458100 {
+			compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
+			reg = <0x458100 0x1f00>;
+			reg-names = "phy";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
 	};
 
 	smpboot {