From patchwork Wed May 27 09:53:14 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sudeep Holla X-Patchwork-Id: 6488701 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork1.web.kernel.org (Postfix) with ESMTP id 165689F1CC for ; Wed, 27 May 2015 09:56:46 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 11AA620652 for ; Wed, 27 May 2015 09:56:45 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.9]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id F14522064C for ; Wed, 27 May 2015 09:56:43 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1YxY2K-0003Sr-GV; Wed, 27 May 2015 09:54:08 +0000 Received: from foss.arm.com ([217.140.101.70]) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1YxY2A-0003O6-JD for linux-arm-kernel@lists.infradead.org; Wed, 27 May 2015 09:54:02 +0000 Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.72.51.249]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id 399FB75; Wed, 27 May 2015 02:53:28 -0700 (PDT) Received: from e103737-lin.cambridge.arm.com (e103737-lin.cambridge.arm.com [10.1.207.150]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPA id ADDAB3F251; Wed, 27 May 2015 02:53:34 -0700 (PDT) From: Sudeep Holla To: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 1/5] Documentation: add DT binding for ARM System Control and Power Interface(SCPI) protocol Date: Wed, 27 May 2015 10:53:14 +0100 Message-Id: <1432720398-5701-2-git-send-email-sudeep.holla@arm.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1432720398-5701-1-git-send-email-sudeep.holla@arm.com> References: <1432720398-5701-1-git-send-email-sudeep.holla@arm.com> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20150527_025358_782980_35EA1474 X-CRM114-Status: GOOD ( 12.39 ) X-Spam-Score: -5.0 (-----) Cc: "Jon Medhurst \(Tixy\)" , Mark Rutland , Lorenzo Pieralisi , Arnd Bergmann , Kevin Hilman , Jassi Brar , Liviu Dudau , devicetree@vger.kernel.org, Rob Herring , Sudeep Holla , Olof Johansson X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.18-1 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Spam-Status: No, score=-4.2 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_MED, T_RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP This patch adds devicetree binding for System Control and Power Interface (SCPI) Message Protocol used between the Application Cores(AP) and the System Control Processor(SCP). The MHU peripheral provides a mechanism for inter-processor communication between SCP's M3 processor and AP. SCP offers control and management of the core/cluster power states, various power domain DVFS including the core/cluster, certain system clocks configuration, thermal sensors and many others. Signed-off-by: Sudeep Holla Cc: Rob Herring Cc: Mark Rutland CC: Jassi Brar Cc: Liviu Dudau Cc: Lorenzo Pieralisi Cc: Jon Medhurst (Tixy) Cc: devicetree@vger.kernel.org --- Documentation/devicetree/bindings/arm/arm,scpi.txt | 121 +++++++++++++++++++++ 1 file changed, 121 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/arm,scpi.txt diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt new file mode 100644 index 000000000000..5db235f69e54 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt @@ -0,0 +1,121 @@ +System Control and Power Interface (SCPI) Message Protocol +---------------------------------------------------------- + +Required properties: + +- compatible : should be "arm,scpi" +- mboxes: List of phandle and mailbox channel specifiers +- shmem : List of phandle pointing to the shared memory(SHM) area between the + processors using these mailboxes for IPC, one for each mailbox + +See Documentation/devicetree/bindings/mailbox/mailbox.txt +for more details about the generic mailbox controller and +client driver bindings. + +Clock bindings for the clocks based on SCPI Message Protocol +------------------------------------------------------------ + +This binding uses the common clock binding[1]. + +Required properties: +- compatible : shall be one of the following: + "arm,scpi-clocks" - for the container node with all the clocks + based on the SCPI protocol + "arm,scpi-dvfs" - all the clocks that are variable and index based. + These clocks don't provide the full range between the limits + but only discrete points within the range. The firmware + provides the mapping for each such operating frequency and the + index associated with it. The firmware also manages the + voltage scaling appropriately with the clock scaling. + "arm,scpi-clk" - all the clocks that are variable and provide full + range within the specified range. The firmware provides the + supported range for each clock. + +Required properties for all clocks(all from common clock binding): +- #clock-cells : should be set to 1 as each of the SCPI clocks have multiple + outputs. The clock specifier will be the index to an entry in the list + of output clocks. +- clock-output-names : shall be the corresponding names of the outputs. +- clock-indices: The identifyng number for the clocks(clock_id) in the node as + expected by the firmware. It can be non linear and hence provide the + mapping of identifiers into the clock-output-names array. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Example: + +sram: sram@50000000 { + compatible = "arm,juno-sram-ns", "mmio-sram"; + reg = <0x0 0x50000000 0x0 0x10000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x50000000 0x10000>; + + cpu_scp_lpri: scp-shmem@0 { + compatible = "arm,juno-scp-shmem"; + reg = <0x0 0x200>; + }; + + cpu_scp_hpri: scp-shmem@200 { + compatible = "arm,juno-scp-shmem"; + reg = <0x200 0x200>; + }; +}; + +mailbox: mailbox0@40000000 { + .... + #mbox-cells = <1>; +}; + +scpi_protocol: scpi@2e000000 { + compatible = "arm,scpi"; + mboxes = <&mailbox 0 &mailbox 1>; + shmem = <&cpu_scp_lpri &cpu_scp_hpri>; + + clocks { + compatible = "arm,scpi-clocks"; + + scpi_dvfs: scpi_clocks@0 { + compatible = "arm,scpi-dvfs"; + #clock-cells = <1>; + clock-indices = <0>, <1>, <2>; + clock-output-names = "vbig", "vlittle", "vgpu"; + }; + scpi_clk: scpi_clocks@3 { + compatible = "arm,scpi-clk"; + #clock-cells = <1>; + clock-indices = <3>, <4>; + clock-output-names = "pxlclk0", "pxlclk1"; + }; + }; +}; + +cpu@0 { + ... + reg = <0 0>; + clocks = <&scpi_dvfs 0>; + clock-names = "big"; +}; + +hdlcd@7ff60000 { + ... + reg = <0 0x7ff60000 0 0x1000>; + clocks = <&scpi_clk 1>; + clock-names = "pxlclk"; +}; + +In the above example, the #clock-cells is set to 1 as required. +scpi_dvfs has 3 output clocks namely: vbig, vlittle and vgpu with 0, 1 +and 2 as clock-indices. scpi_clk has 2 output clocks namely: pxlclk0 and +pxlclk1 with 3 and 4 as clock-indices. + +The first consumer in the example is cpu@0 and it has vbig as input clock. +The index '0' in the clock specifier here points to the first entry in the +output clocks of scpi_dvfs for which clock_id asrequired by the firmware +is 0. + +Similarly the second example is hdlcd@7ff60000 and it has pxlclk0 as input +clock. The index '1' in the clock specifier here points to the second entry +in the output clocks of scpi_clocks for which clock_id as required by the +firmware is 4.