From patchwork Thu May 28 20:31:43 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Joachim Eastwood X-Patchwork-Id: 6501671 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 48E2DC0433 for ; Thu, 28 May 2015 20:38:33 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 8641A20727 for ; Thu, 28 May 2015 20:38:31 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.9]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id AA9CF2071A for ; Thu, 28 May 2015 20:38:29 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1Yy4W3-0003BM-RE; Thu, 28 May 2015 20:34:59 +0000 Received: from mail-lb0-x22c.google.com ([2a00:1450:4010:c04::22c]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1Yy4TS-00029H-IB for linux-arm-kernel@lists.infradead.org; Thu, 28 May 2015 20:32:27 +0000 Received: by lbcmx3 with SMTP id mx3so36117182lbc.1 for ; Thu, 28 May 2015 13:31:56 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=YDRDbused/pCmmKRMigAa3cAthCI5FPjK9i3oTAwMTE=; b=Y1rfE7NyzyNi/udQk+hGa5TM/Otx3PfVHdeswfw0WskINzt5vH2c/lTbBY3R/E61LU rL3bW5IpDftaMTmt9rNiCY3bRsYLT729BwsZfmDdY/jW6FvtYQKXRAxVzIZk8hNhe2hX Pl4yzCE6W2ObYNrF8GUxYTcDDh2RhoptGkmNuy3S/HkRusZ3PuLaOqAtK3ULxvdY/CR2 wGLjxu6eMsaKK9LN2PHV2oMyAXvaCmJO5kE62PTKOpIkMsEKcpbNj2l4KH9hxoL0iNzC G30d24SHANKb4i0RiTcEVF2uO12nVKsTf4k7j8sqq+ZKi0aA7GsIrHaBsOp5yCZ3qBRW cFag== X-Received: by 10.112.161.40 with SMTP id xp8mr4514617lbb.71.1432845116280; Thu, 28 May 2015 13:31:56 -0700 (PDT) Received: from localhost.localdomain (183.90-149-48.nextgentel.com. [90.149.48.183]) by mx.google.com with ESMTPSA id oy3sm829119lbb.1.2015.05.28.13.31.55 (version=TLSv1.1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Thu, 28 May 2015 13:31:55 -0700 (PDT) From: Joachim Eastwood To: mturquette@linaro.org, sboyd@codeaurora.org Subject: [PATCH v4 1/5] clk: add lpc18xx cgu clk driver Date: Thu, 28 May 2015 22:31:43 +0200 Message-Id: <1432845107-12458-2-git-send-email-manabian@gmail.com> X-Mailer: git-send-email 1.8.0 In-Reply-To: <1432845107-12458-1-git-send-email-manabian@gmail.com> References: <1432845107-12458-1-git-send-email-manabian@gmail.com> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20150528_133219_080014_1C97AF54 X-CRM114-Status: GOOD ( 19.40 ) X-Spam-Score: -0.8 (/) Cc: devicetree@vger.kernel.org, Joachim Eastwood , linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.18-1 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Spam-Status: No, score=-4.1 required=5.0 tests=BAYES_00, DKIM_ADSP_CUSTOM_MED, DKIM_SIGNED, FREEMAIL_FROM, RCVD_IN_DNSWL_MED, T_DKIM_INVALID, T_RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Add driver for NXP LPC18xx/43xx Clock Generation Unit (CGU). The CGU contains several clock generators and output stages that route the clocks either directly to peripherals or to a Clock Control Unit (CCU). Signed-off-by: Joachim Eastwood --- drivers/clk/Makefile | 1 + drivers/clk/nxp/Makefile | 1 + drivers/clk/nxp/clk-lpc18xx-cgu.c | 635 ++++++++++++++++++++++++++++++++ include/dt-bindings/clock/lpc18xx-cgu.h | 41 +++ 4 files changed, 678 insertions(+) create mode 100644 drivers/clk/nxp/Makefile create mode 100644 drivers/clk/nxp/clk-lpc18xx-cgu.c create mode 100644 include/dt-bindings/clock/lpc18xx-cgu.h diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 3d00c25382c5..4a34419c1da1 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_ARCH_MMP) += mmp/ endif obj-$(CONFIG_PLAT_ORION) += mvebu/ obj-$(CONFIG_ARCH_MXS) += mxs/ +obj-$(CONFIG_ARCH_LPC18XX) += nxp/ obj-$(CONFIG_MACH_PISTACHIO) += pistachio/ obj-$(CONFIG_COMMON_CLK_PXA) += pxa/ obj-$(CONFIG_COMMON_CLK_QCOM) += qcom/ diff --git a/drivers/clk/nxp/Makefile b/drivers/clk/nxp/Makefile new file mode 100644 index 000000000000..aca9d3e4f7fe --- /dev/null +++ b/drivers/clk/nxp/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ARCH_LPC18XX) += clk-lpc18xx-cgu.o diff --git a/drivers/clk/nxp/clk-lpc18xx-cgu.c b/drivers/clk/nxp/clk-lpc18xx-cgu.c new file mode 100644 index 000000000000..81e9e1c788f4 --- /dev/null +++ b/drivers/clk/nxp/clk-lpc18xx-cgu.c @@ -0,0 +1,635 @@ +/* + * Clk driver for NXP LPC18xx/LPC43xx Clock Generation Unit (CGU) + * + * Copyright (C) 2015 Joachim Eastwood + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include + +#include + +/* Clock Generation Unit (CGU) registers */ +#define LPC18XX_CGU_XTAL_OSC_CTRL 0x018 +#define LPC18XX_CGU_PLL0USB_STAT 0x01c +#define LPC18XX_CGU_PLL0USB_CTRL 0x020 +#define LPC18XX_CGU_PLL0USB_MDIV 0x024 +#define LPC18XX_CGU_PLL0USB_NP_DIV 0x028 +#define LPC18XX_CGU_PLL0AUDIO_STAT 0x02c +#define LPC18XX_CGU_PLL0AUDIO_CTRL 0x030 +#define LPC18XX_CGU_PLL0AUDIO_MDIV 0x034 +#define LPC18XX_CGU_PLL0AUDIO_NP_DIV 0x038 +#define LPC18XX_CGU_PLL0AUDIO_FRAC 0x03c +#define LPC18XX_CGU_PLL1_STAT 0x040 +#define LPC18XX_CGU_PLL1_CTRL 0x044 +#define LPC18XX_PLL1_CTRL_FBSEL BIT(6) +#define LPC18XX_PLL1_CTRL_DIRECT BIT(7) +#define LPC18XX_CGU_IDIV_CTRL(n) (0x048 + (n) * sizeof(u32)) +#define LPC18XX_CGU_BASE_CLK(id) (0x05c + (id) * sizeof(u32)) +#define LPC18XX_CGU_PLL_CTRL_OFFSET 0x4 + +/* PLL0 bits common to both audio and USB PLL */ +#define LPC18XX_PLL0_STAT_LOCK BIT(0) +#define LPC18XX_PLL0_CTRL_PD BIT(0) +#define LPC18XX_PLL0_CTRL_BYPASS BIT(1) +#define LPC18XX_PLL0_CTRL_DIRECTI BIT(2) +#define LPC18XX_PLL0_CTRL_DIRECTO BIT(3) +#define LPC18XX_PLL0_CTRL_CLKEN BIT(4) +#define LPC18XX_PLL0_MDIV_MDEC_MASK 0x1ffff +#define LPC18XX_PLL0_MDIV_SELP_SHIFT 17 +#define LPC18XX_PLL0_MDIV_SELI_SHIFT 22 +#define LPC18XX_PLL0_MSEL_MAX BIT(15) + +/* Register value that gives PLL0 post/pre dividers equal to 1 */ +#define LPC18XX_PLL0_NP_DIVS_1 0x00302062 + +enum { + CLK_SRC_OSC32, + CLK_SRC_IRC, + CLK_SRC_ENET_RX_CLK, + CLK_SRC_ENET_TX_CLK, + CLK_SRC_GP_CLKIN, + CLK_SRC_RESERVED1, + CLK_SRC_OSC, + CLK_SRC_PLL0USB, + CLK_SRC_PLL0AUDIO, + CLK_SRC_PLL1, + CLK_SRC_RESERVED2, + CLK_SRC_RESERVED3, + CLK_SRC_IDIVA, + CLK_SRC_IDIVB, + CLK_SRC_IDIVC, + CLK_SRC_IDIVD, + CLK_SRC_IDIVE, + CLK_SRC_MAX +}; + +static const char *clk_src_names[CLK_SRC_MAX] = { + [CLK_SRC_OSC32] = "osc32", + [CLK_SRC_IRC] = "irc", + [CLK_SRC_ENET_RX_CLK] = "enet_rx_clk", + [CLK_SRC_ENET_TX_CLK] = "enet_tx_clk", + [CLK_SRC_GP_CLKIN] = "gp_clkin", + [CLK_SRC_OSC] = "osc", + [CLK_SRC_PLL0USB] = "pll0usb", + [CLK_SRC_PLL0AUDIO] = "pll0audio", + [CLK_SRC_PLL1] = "pll1", + [CLK_SRC_IDIVA] = "idiva", + [CLK_SRC_IDIVB] = "idivb", + [CLK_SRC_IDIVC] = "idivc", + [CLK_SRC_IDIVD] = "idivd", + [CLK_SRC_IDIVE] = "idive", +}; + +static const char *clk_base_names[BASE_CLK_MAX] = { + [BASE_SAFE_CLK] = "base_safe_clk", + [BASE_USB0_CLK] = "base_usb0_clk", + [BASE_PERIPH_CLK] = "base_periph_clk", + [BASE_USB1_CLK] = "base_usb1_clk", + [BASE_CPU_CLK] = "base_cpu_clk", + [BASE_SPIFI_CLK] = "base_spifi_clk", + [BASE_SPI_CLK] = "base_spi_clk", + [BASE_PHY_RX_CLK] = "base_phy_rx_clk", + [BASE_PHY_TX_CLK] = "base_phy_tx_clk", + [BASE_APB1_CLK] = "base_apb1_clk", + [BASE_APB3_CLK] = "base_apb3_clk", + [BASE_LCD_CLK] = "base_lcd_clk", + [BASE_ADCHS_CLK] = "base_adchs_clk", + [BASE_SDIO_CLK] = "base_sdio_clk", + [BASE_SSP0_CLK] = "base_ssp0_clk", + [BASE_SSP1_CLK] = "base_ssp1_clk", + [BASE_UART0_CLK] = "base_uart0_clk", + [BASE_UART1_CLK] = "base_uart1_clk", + [BASE_UART2_CLK] = "base_uart2_clk", + [BASE_UART3_CLK] = "base_uart3_clk", + [BASE_OUT_CLK] = "base_out_clk", + [BASE_AUDIO_CLK] = "base_audio_clk", + [BASE_CGU_OUT0_CLK] = "base_cgu_out0_clk", + [BASE_CGU_OUT1_CLK] = "base_cgu_out1_clk", +}; + +static u32 lpc18xx_cgu_pll0_src_ids[] = { + CLK_SRC_OSC32, CLK_SRC_IRC, CLK_SRC_ENET_RX_CLK, + CLK_SRC_ENET_TX_CLK, CLK_SRC_GP_CLKIN, CLK_SRC_OSC, + CLK_SRC_PLL1, CLK_SRC_IDIVA, CLK_SRC_IDIVB, CLK_SRC_IDIVC, + CLK_SRC_IDIVD, CLK_SRC_IDIVE, +}; + +static u32 lpc18xx_cgu_pll1_src_ids[] = { + CLK_SRC_OSC32, CLK_SRC_IRC, CLK_SRC_ENET_RX_CLK, + CLK_SRC_ENET_TX_CLK, CLK_SRC_GP_CLKIN, CLK_SRC_OSC, + CLK_SRC_PLL0USB, CLK_SRC_PLL0AUDIO, CLK_SRC_IDIVA, + CLK_SRC_IDIVB, CLK_SRC_IDIVC, CLK_SRC_IDIVD, CLK_SRC_IDIVE, +}; + +static u32 lpc18xx_cgu_idiva_src_ids[] = { + CLK_SRC_OSC32, CLK_SRC_IRC, CLK_SRC_ENET_RX_CLK, + CLK_SRC_ENET_TX_CLK, CLK_SRC_GP_CLKIN, CLK_SRC_OSC, + CLK_SRC_PLL0USB, CLK_SRC_PLL0AUDIO, CLK_SRC_PLL1 +}; + +static u32 lpc18xx_cgu_idivbcde_src_ids[] = { + CLK_SRC_OSC32, CLK_SRC_IRC, CLK_SRC_ENET_RX_CLK, + CLK_SRC_ENET_TX_CLK, CLK_SRC_GP_CLKIN, CLK_SRC_OSC, + CLK_SRC_PLL0AUDIO, CLK_SRC_PLL1, CLK_SRC_IDIVA, +}; + +static u32 lpc18xx_cgu_base_irc_src_ids[] = {CLK_SRC_IRC}; + +static u32 lpc18xx_cgu_base_usb0_src_ids[] = {CLK_SRC_PLL0USB}; + +static u32 lpc18xx_cgu_base_common_src_ids[] = { + CLK_SRC_OSC32, CLK_SRC_IRC, CLK_SRC_ENET_RX_CLK, + CLK_SRC_ENET_TX_CLK, CLK_SRC_GP_CLKIN, CLK_SRC_OSC, + CLK_SRC_PLL0AUDIO, CLK_SRC_PLL1, CLK_SRC_IDIVA, + CLK_SRC_IDIVB, CLK_SRC_IDIVC, CLK_SRC_IDIVD, CLK_SRC_IDIVE, +}; + +static u32 lpc18xx_cgu_base_all_src_ids[] = { + CLK_SRC_OSC32, CLK_SRC_IRC, CLK_SRC_ENET_RX_CLK, + CLK_SRC_ENET_TX_CLK, CLK_SRC_GP_CLKIN, CLK_SRC_OSC, + CLK_SRC_PLL0USB, CLK_SRC_PLL0AUDIO, CLK_SRC_PLL1, + CLK_SRC_IDIVA, CLK_SRC_IDIVB, CLK_SRC_IDIVC, + CLK_SRC_IDIVD, CLK_SRC_IDIVE, +}; + +struct lpc18xx_cgu_src_clk_div { + u8 clk_id; + u8 n_parents; + struct clk_divider div; + struct clk_mux mux; + struct clk_gate gate; +}; + +#define LPC1XX_CGU_SRC_CLK_DIV(_id, _width, _table) \ +{ \ + .clk_id = CLK_SRC_ ##_id, \ + .n_parents = ARRAY_SIZE(lpc18xx_cgu_ ##_table), \ + .div = { \ + .shift = 2, \ + .width = _width, \ + }, \ + .mux = { \ + .mask = 0x1f, \ + .shift = 24, \ + .table = lpc18xx_cgu_ ##_table, \ + }, \ + .gate = { \ + .bit_idx = 0, \ + .flags = CLK_GATE_SET_TO_DISABLE, \ + }, \ +} + +static struct lpc18xx_cgu_src_clk_div lpc18xx_cgu_src_clk_divs[] = { + LPC1XX_CGU_SRC_CLK_DIV(IDIVA, 2, idiva_src_ids), + LPC1XX_CGU_SRC_CLK_DIV(IDIVB, 4, idivbcde_src_ids), + LPC1XX_CGU_SRC_CLK_DIV(IDIVC, 4, idivbcde_src_ids), + LPC1XX_CGU_SRC_CLK_DIV(IDIVD, 4, idivbcde_src_ids), + LPC1XX_CGU_SRC_CLK_DIV(IDIVE, 8, idivbcde_src_ids), +}; + +struct lpc18xx_cgu_base_clk { + u8 clk_id; + u8 n_parents; + struct clk_mux mux; + struct clk_gate gate; +}; + +#define LPC1XX_CGU_BASE_CLK(_id, _table, _flags) \ +{ \ + .clk_id = BASE_ ##_id ##_CLK, \ + .n_parents = ARRAY_SIZE(lpc18xx_cgu_ ##_table), \ + .mux = { \ + .mask = 0x1f, \ + .shift = 24, \ + .table = lpc18xx_cgu_ ##_table, \ + .flags = _flags, \ + }, \ + .gate = { \ + .bit_idx = 0, \ + .flags = CLK_GATE_SET_TO_DISABLE, \ + }, \ +} + +static struct lpc18xx_cgu_base_clk lpc18xx_cgu_base_clks[] = { + LPC1XX_CGU_BASE_CLK(SAFE, base_irc_src_ids, CLK_MUX_READ_ONLY), + LPC1XX_CGU_BASE_CLK(USB0, base_usb0_src_ids, 0), + LPC1XX_CGU_BASE_CLK(PERIPH, base_common_src_ids, 0), + LPC1XX_CGU_BASE_CLK(USB1, base_all_src_ids, 0), + LPC1XX_CGU_BASE_CLK(CPU, base_common_src_ids, 0), + LPC1XX_CGU_BASE_CLK(SPIFI, base_common_src_ids, 0), + LPC1XX_CGU_BASE_CLK(SPI, base_common_src_ids, 0), + LPC1XX_CGU_BASE_CLK(PHY_RX, base_common_src_ids, 0), + LPC1XX_CGU_BASE_CLK(PHY_TX, base_common_src_ids, 0), + LPC1XX_CGU_BASE_CLK(APB1, base_common_src_ids, 0), + LPC1XX_CGU_BASE_CLK(APB3, base_common_src_ids, 0), + LPC1XX_CGU_BASE_CLK(LCD, base_common_src_ids, 0), + LPC1XX_CGU_BASE_CLK(ADCHS, base_common_src_ids, 0), + LPC1XX_CGU_BASE_CLK(SDIO, base_common_src_ids, 0), + LPC1XX_CGU_BASE_CLK(SSP0, base_common_src_ids, 0), + LPC1XX_CGU_BASE_CLK(SSP1, base_common_src_ids, 0), + LPC1XX_CGU_BASE_CLK(UART0, base_common_src_ids, 0), + LPC1XX_CGU_BASE_CLK(UART1, base_common_src_ids, 0), + LPC1XX_CGU_BASE_CLK(UART2, base_common_src_ids, 0), + LPC1XX_CGU_BASE_CLK(UART3, base_common_src_ids, 0), + LPC1XX_CGU_BASE_CLK(OUT, base_all_src_ids, 0), + { /* 21 reserved */ }, + { /* 22 reserved */ }, + { /* 23 reserved */ }, + { /* 24 reserved */ }, + LPC1XX_CGU_BASE_CLK(AUDIO, base_common_src_ids, 0), + LPC1XX_CGU_BASE_CLK(CGU_OUT0, base_all_src_ids, 0), + LPC1XX_CGU_BASE_CLK(CGU_OUT1, base_all_src_ids, 0), +}; + +struct lpc18xx_pll { + struct clk_hw hw; + void __iomem *reg; + spinlock_t *lock; + u8 flags; +}; + +#define to_lpc_pll(hw) container_of(hw, struct lpc18xx_pll, hw) + +struct lpc18xx_cgu_pll_clk { + u8 clk_id; + u8 n_parents; + u8 reg_offset; + struct clk_mux mux; + struct clk_gate gate; + struct lpc18xx_pll pll; + const struct clk_ops *pll_ops; +}; + +#define LPC1XX_CGU_CLK_PLL(_id, _table, _pll_ops) \ +{ \ + .clk_id = CLK_SRC_ ##_id, \ + .n_parents = ARRAY_SIZE(lpc18xx_cgu_ ##_table), \ + .reg_offset = LPC18XX_CGU_ ##_id ##_STAT, \ + .mux = { \ + .mask = 0x1f, \ + .shift = 24, \ + .table = lpc18xx_cgu_ ##_table, \ + }, \ + .gate = { \ + .bit_idx = 0, \ + .flags = CLK_GATE_SET_TO_DISABLE, \ + }, \ + .pll_ops = &lpc18xx_ ##_pll_ops, \ +} + +/* + * PLL0 uses a special register value encoding. The compute functions below + * are taken or derived from the LPC1850 user manual (section 12.6.3.3). + */ + +/* Compute PLL0 multiplier from decoded version */ +static u32 lpc18xx_pll0_mdec2msel(u32 x) +{ + int i; + + switch (x) { + case 0x18003: return 1; + case 0x10003: return 2; + default: + for (i = LPC18XX_PLL0_MSEL_MAX + 1; x != 0x4000 && i > 0; i--) + x = ((x ^ x >> 14) & 1) | (x << 1 & 0x7fff); + return i; + } +} +/* Compute PLL0 decoded multiplier from binary version */ +static u32 lpc18xx_pll0_msel2mdec(u32 msel) +{ + u32 i, x = 0x4000; + + switch (msel) { + case 0: return 0; + case 1: return 0x18003; + case 2: return 0x10003; + default: + for (i = msel; i <= LPC18XX_PLL0_MSEL_MAX; i++) + x = ((x ^ x >> 1) & 1) << 14 | (x >> 1 & 0xffff); + return x; + } +} + +/* Compute PLL0 bandwidth SELI reg from multiplier */ +static u32 lpc18xx_pll0_msel2seli(u32 msel) +{ + u32 tmp; + + if (msel > 16384) return 1; + if (msel > 8192) return 2; + if (msel > 2048) return 4; + if (msel >= 501) return 8; + if (msel >= 60) { + tmp = 1024 / (msel + 9); + return ((1024 == (tmp * (msel + 9))) == 0) ? tmp * 4 : (tmp + 1) * 4; + } + + return (msel & 0x3c) + 4; +} + +/* Compute PLL0 bandwidth SELP reg from multiplier */ +static u32 lpc18xx_pll0_msel2selp(u32 msel) +{ + if (msel < 60) + return (msel >> 1) + 1; + + return 31; +} + +static unsigned long lpc18xx_pll0_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct lpc18xx_pll *pll = to_lpc_pll(hw); + u32 ctrl, mdiv, msel, npdiv; + + ctrl = clk_readl(pll->reg + LPC18XX_CGU_PLL0USB_CTRL); + mdiv = clk_readl(pll->reg + LPC18XX_CGU_PLL0USB_MDIV); + npdiv = clk_readl(pll->reg + LPC18XX_CGU_PLL0USB_NP_DIV); + + if (ctrl & LPC18XX_PLL0_CTRL_BYPASS) + return parent_rate; + + if (npdiv != LPC18XX_PLL0_NP_DIVS_1) { + pr_warn("%s: pre/post dividers not supported\n", __func__); + return 0; + } + + msel = lpc18xx_pll0_mdec2msel(mdiv & LPC18XX_PLL0_MDIV_MDEC_MASK); + if (msel) + return 2 * msel * parent_rate; + + pr_warn("%s: unable to calculate rate\n", __func__); + + return 0; +} + +static long lpc18xx_pll0_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + unsigned long m; + + if (*prate < rate) { + pr_warn("%s: pll dividers not supported\n", __func__); + return -EINVAL; + } + + m = DIV_ROUND_UP_ULL(*prate, rate * 2); + if (m <= 0 && m > LPC18XX_PLL0_MSEL_MAX) { + pr_warn("%s: unable to support rate %lu\n", __func__, rate); + return -EINVAL; + } + + return 2 * *prate * m; +} + +static int lpc18xx_pll0_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct lpc18xx_pll *pll = to_lpc_pll(hw); + u32 ctrl, stat, m; + int retry = 3; + + if (parent_rate < rate) { + pr_warn("%s: pll dividers not supported\n", __func__); + return -EINVAL; + } + + m = DIV_ROUND_UP_ULL(parent_rate, rate * 2); + if (m <= 0 && m > LPC18XX_PLL0_MSEL_MAX) { + pr_warn("%s: unable to support rate %lu\n", __func__, rate); + return -EINVAL; + } + + m = lpc18xx_pll0_msel2mdec(m); + m |= lpc18xx_pll0_msel2selp(m) << LPC18XX_PLL0_MDIV_SELP_SHIFT; + m |= lpc18xx_pll0_msel2seli(m) << LPC18XX_PLL0_MDIV_SELI_SHIFT; + + /* Power down PLL, disable clk output and dividers */ + ctrl = clk_readl(pll->reg + LPC18XX_CGU_PLL0USB_CTRL); + ctrl |= LPC18XX_PLL0_CTRL_PD; + ctrl &= ~(LPC18XX_PLL0_CTRL_BYPASS | LPC18XX_PLL0_CTRL_DIRECTI | + LPC18XX_PLL0_CTRL_DIRECTO | LPC18XX_PLL0_CTRL_CLKEN); + clk_writel(ctrl, pll->reg + LPC18XX_CGU_PLL0USB_CTRL); + + /* Configure new PLL settings */ + clk_writel(m, pll->reg + LPC18XX_CGU_PLL0USB_MDIV); + clk_writel(LPC18XX_PLL0_NP_DIVS_1, pll->reg + LPC18XX_CGU_PLL0USB_NP_DIV); + + /* Power up PLL and wait for lock */ + ctrl &= ~LPC18XX_PLL0_CTRL_PD; + clk_writel(ctrl, pll->reg + LPC18XX_CGU_PLL0USB_CTRL); + do { + udelay(10); + stat = clk_readl(pll->reg + LPC18XX_CGU_PLL0USB_STAT); + if (stat & LPC18XX_PLL0_STAT_LOCK) { + ctrl |= LPC18XX_PLL0_CTRL_CLKEN; + clk_writel(ctrl, pll->reg + LPC18XX_CGU_PLL0USB_CTRL); + + return 0; + } + } while (retry--); + + pr_warn("%s: unable to lock pll\n", __func__); + + return -EINVAL; +} + +static const struct clk_ops lpc18xx_pll0_ops = { + .recalc_rate = lpc18xx_pll0_recalc_rate, + .round_rate = lpc18xx_pll0_round_rate, + .set_rate = lpc18xx_pll0_set_rate, +}; + +static unsigned long lpc18xx_pll1_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct lpc18xx_pll *pll = to_lpc_pll(hw); + u16 msel, nsel, psel; + bool direct, fbsel; + u32 stat, ctrl; + + stat = clk_readl(pll->reg + LPC18XX_CGU_PLL1_STAT); + ctrl = clk_readl(pll->reg + LPC18XX_CGU_PLL1_CTRL); + + direct = (ctrl & LPC18XX_PLL1_CTRL_DIRECT) ? true : false; + fbsel = (ctrl & LPC18XX_PLL1_CTRL_FBSEL) ? true : false; + + msel = ((ctrl >> 16) & 0xff) + 1; + nsel = ((ctrl >> 12) & 0x3) + 1; + + if (direct || fbsel) + return msel * (parent_rate / nsel); + + psel = (ctrl >> 8) & 0x3; + psel = 1 << psel; + + return (msel / (2 * psel)) * (parent_rate / nsel); +} + +static const struct clk_ops lpc18xx_pll1_ops = { + .recalc_rate = lpc18xx_pll1_recalc_rate, +}; + +static struct lpc18xx_cgu_pll_clk lpc18xx_cgu_src_clk_plls[] = { + LPC1XX_CGU_CLK_PLL(PLL0USB, pll0_src_ids, pll0_ops), + LPC1XX_CGU_CLK_PLL(PLL0AUDIO, pll0_src_ids, pll0_ops), + LPC1XX_CGU_CLK_PLL(PLL1, pll1_src_ids, pll1_ops), +}; + +static void lpc18xx_fill_parent_names(const char **parent, u32 *id, int size) +{ + int i; + + for (i = 0; i < size; i++) + parent[i] = clk_src_names[id[i]]; +} + +static struct clk *lpc18xx_cgu_register_div(struct lpc18xx_cgu_src_clk_div *clk, + void __iomem *base, int n) +{ + void __iomem *reg = base + LPC18XX_CGU_IDIV_CTRL(n); + const char *name = clk_src_names[clk->clk_id]; + const char *parents[CLK_SRC_MAX]; + + clk->div.reg = reg; + clk->mux.reg = reg; + clk->gate.reg = reg; + + lpc18xx_fill_parent_names(parents, clk->mux.table, clk->n_parents); + + return clk_register_composite(NULL, name, parents, clk->n_parents, + &clk->mux.hw, &clk_mux_ops, + &clk->div.hw, &clk_divider_ops, + &clk->gate.hw, &clk_gate_ops, 0); +} + + +static struct clk *lpc18xx_register_base_clk(struct lpc18xx_cgu_base_clk *clk, + void __iomem *reg_base, int n) +{ + void __iomem *reg = reg_base + LPC18XX_CGU_BASE_CLK(n); + const char *name = clk_base_names[clk->clk_id]; + const char *parents[CLK_SRC_MAX]; + + if (clk->n_parents == 0) + return ERR_PTR(-ENOENT); + + clk->mux.reg = reg; + clk->gate.reg = reg; + + lpc18xx_fill_parent_names(parents, clk->mux.table, clk->n_parents); + + /* SAFE_CLK can not be turned off */ + if (n == BASE_SAFE_CLK) + return clk_register_composite(NULL, name, parents, clk->n_parents, + &clk->mux.hw, &clk_mux_ops, + NULL, NULL, NULL, NULL, 0); + + return clk_register_composite(NULL, name, parents, clk->n_parents, + &clk->mux.hw, &clk_mux_ops, + NULL, NULL, + &clk->gate.hw, &clk_gate_ops, 0); +} + + +static struct clk *lpc18xx_cgu_register_pll(struct lpc18xx_cgu_pll_clk *clk, + void __iomem *base) +{ + const char *name = clk_src_names[clk->clk_id]; + const char *parents[CLK_SRC_MAX]; + + clk->pll.reg = base; + clk->mux.reg = base + clk->reg_offset + LPC18XX_CGU_PLL_CTRL_OFFSET; + clk->gate.reg = base + clk->reg_offset + LPC18XX_CGU_PLL_CTRL_OFFSET; + + lpc18xx_fill_parent_names(parents, clk->mux.table, clk->n_parents); + + return clk_register_composite(NULL, name, parents, clk->n_parents, + &clk->mux.hw, &clk_mux_ops, + &clk->pll.hw, clk->pll_ops, + &clk->gate.hw, &clk_gate_ops, 0); +} + +static void __init lpc18xx_cgu_register_source_clks(struct device_node *np, + void __iomem *base) +{ + const char *parents[CLK_SRC_MAX]; + struct clk *clk; + int i; + + /* Register the internal 12 MHz RC oscillator (IRC) */ + clk = clk_register_fixed_rate(NULL, clk_src_names[CLK_SRC_IRC], + NULL, CLK_IS_ROOT, 12000000); + if (IS_ERR(clk)) + pr_warn("%s: failed to register irc clk\n", __func__); + + /* Register crystal oscillator controlller */ + parents[0] = of_clk_get_parent_name(np, 0); + clk = clk_register_gate(NULL, clk_src_names[CLK_SRC_OSC], parents[0], + 0, base + LPC18XX_CGU_XTAL_OSC_CTRL, + 0, CLK_GATE_SET_TO_DISABLE, NULL); + if (IS_ERR(clk)) + pr_warn("%s: failed to register osc clk\n", __func__); + + /* Register all PLLs */ + for (i = 0; i < ARRAY_SIZE(lpc18xx_cgu_src_clk_plls); i++) { + clk = lpc18xx_cgu_register_pll(&lpc18xx_cgu_src_clk_plls[i], + base); + if (IS_ERR(clk)) + pr_warn("%s: failed to register pll (%d)\n", __func__, i); + } + + /* Register all clock dividers A-E */ + for (i = 0; i < ARRAY_SIZE(lpc18xx_cgu_src_clk_divs); i++) { + clk = lpc18xx_cgu_register_div(&lpc18xx_cgu_src_clk_divs[i], + base, i); + if (IS_ERR(clk)) + pr_warn("%s: failed to register div %d\n", __func__, i); + } +} + +static struct clk *clk_base[BASE_CLK_MAX]; +static struct clk_onecell_data clk_base_data = { + .clks = clk_base, + .clk_num = BASE_CLK_MAX, +}; + +static void __init lpc18xx_cgu_register_base_clks(void __iomem *reg_base) +{ + int i; + + for (i = BASE_SAFE_CLK; i < BASE_CLK_MAX; i++) { + clk_base[i] = lpc18xx_register_base_clk(&lpc18xx_cgu_base_clks[i], + reg_base, i); + if (IS_ERR(clk_base[i]) && PTR_ERR(clk_base[i]) != -ENOENT) + pr_warn("%s: register base clk %d failed\n", __func__, i); + } +} + +static void __init lpc18xx_cgu_init(struct device_node *np) +{ + void __iomem *reg_base; + + reg_base = of_iomap(np, 0); + if (!reg_base) { + pr_warn("%s: failed to map address range\n", __func__); + return; + } + + lpc18xx_cgu_register_source_clks(np, reg_base); + lpc18xx_cgu_register_base_clks(reg_base); + + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_base_data); +} +CLK_OF_DECLARE(lpc18xx_cgu, "nxp,lpc1850-cgu", lpc18xx_cgu_init); diff --git a/include/dt-bindings/clock/lpc18xx-cgu.h b/include/dt-bindings/clock/lpc18xx-cgu.h new file mode 100644 index 000000000000..6e57c6d2ca66 --- /dev/null +++ b/include/dt-bindings/clock/lpc18xx-cgu.h @@ -0,0 +1,41 @@ +/* + * Copyright (c) 2015 Joachim Eastwood + * + * This code is released using a dual license strategy: BSD/GPL + * You can choose the licence that better fits your requirements. + * + * Released under the terms of 3-clause BSD License + * Released under the terms of GNU General Public License Version 2.0 + * + */ + +/* LPC18xx/43xx base clock ids */ +#define BASE_SAFE_CLK 0 +#define BASE_USB0_CLK 1 +#define BASE_PERIPH_CLK 2 +#define BASE_USB1_CLK 3 +#define BASE_CPU_CLK 4 +#define BASE_SPIFI_CLK 5 +#define BASE_SPI_CLK 6 +#define BASE_PHY_RX_CLK 7 +#define BASE_PHY_TX_CLK 8 +#define BASE_APB1_CLK 9 +#define BASE_APB3_CLK 10 +#define BASE_LCD_CLK 11 +#define BASE_ADCHS_CLK 12 +#define BASE_SDIO_CLK 13 +#define BASE_SSP0_CLK 14 +#define BASE_SSP1_CLK 15 +#define BASE_UART0_CLK 16 +#define BASE_UART1_CLK 17 +#define BASE_UART2_CLK 18 +#define BASE_UART3_CLK 19 +#define BASE_OUT_CLK 20 +#define BASE_RES1_CLK 21 +#define BASE_RES2_CLK 22 +#define BASE_RES3_CLK 23 +#define BASE_RES4_CLK 24 +#define BASE_AUDIO_CLK 25 +#define BASE_CGU_OUT0_CLK 26 +#define BASE_CGU_OUT1_CLK 27 +#define BASE_CLK_MAX (BASE_CGU_OUT1_CLK + 1)