diff mbox

[5/5] dts: imx7: fix sd card gpio polarity specified in device tree

Message ID 1434562418-24090-6-git-send-email-aisheng.dong@freescale.com (mailing list archive)
State New, archived
Headers show

Commit Message

Dong Aisheng June 17, 2015, 5:33 p.m. UTC 
cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().

Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
---
 arch/arm/boot/dts/imx7d-sdb.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 4d1a4b9..fdd1d7c 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -234,8 +234,8 @@ 
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio5 0 0>;
-	wp-gpios = <&gpio5 1 0>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 	enable-sdio-wakeup;
 	keep-power-in-suspend;
 	status = "okay";