@@ -26,6 +26,14 @@
clocks = <&clks CLK_NONE>;
};
+ pxa27x_ohci: usb@4c000000 {
+ compatible = "marvell,pxa-ohci";
+ reg = <0x4c000000 0x10000>;
+ interrupts = <3>;
+ clocks = <&clks CLK_USBHOST>;
+ status = "disabled";
+ };
+
pwm0: pwm@40b00000 {
compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
reg = <0x40b00000 0x10>;
@@ -86,6 +86,14 @@
dma-names = "rx", "tx";
status = "disabled";
};
+
+ pxa3xx_ohci: usb@4c000000 {
+ compatible = "marvell,pxa-ohci";
+ reg = <0x4c000000 0x10000>;
+ interrupts = <3>;
+ clocks = <&clks CLK_USBHOST>;
+ status = "disabled";
+ };
};
clocks {
Add the usb host controller to pxa27x and pxa3xx. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> --- Since v2: change node name from ohci to usb (ePAPR) --- arch/arm/boot/dts/pxa27x.dtsi | 8 ++++++++ arch/arm/boot/dts/pxa3xx.dtsi | 8 ++++++++ 2 files changed, 16 insertions(+)