| Message ID | 1436282847-21137-7-git-send-email-antoine.tenart@free-electrons.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 63a48490e2f9..aeb2a68302ae 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -477,6 +477,19 @@ status = "disabled"; }; + nand0: nand@f00000 { + compatible = "marvell,berlin2-nand"; + reg = <0xf00000 0x10000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&chip_clk CLKID_NFC>, + <&chip_clk CLKID_NFC_ECC>; + clock-names = "nfc", "ecc"; + + #address-cells = <1>; + + status = "disabled"; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>;
Add a node describing the nand controller of the Marvell Berlin BG2Q SoC. It uses the pxa3xx nand driver, with a dedicated compatible. Also add the corresponding pinmuxing configuration. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> --- arch/arm/boot/dts/berlin2q.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)