From patchwork Wed Jul 8 09:47:11 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rajendra Nayak X-Patchwork-Id: 6743741 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 3005AC05AC for ; Wed, 8 Jul 2015 09:51:11 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 0D62420600 for ; Wed, 8 Jul 2015 09:51:10 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.9]) (using TLSv1.2 with cipher AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id D8DAF20767 for ; Wed, 8 Jul 2015 09:51:08 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1ZClyH-0001BB-1B; Wed, 08 Jul 2015 09:48:53 +0000 Received: from smtp.codeaurora.org ([198.145.29.96]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1ZCly5-0000s3-Ia for linux-arm-kernel@lists.infradead.org; Wed, 08 Jul 2015 09:48:42 +0000 Received: from smtp.codeaurora.org (localhost [127.0.0.1]) by smtp.codeaurora.org (Postfix) with ESMTP id 8DC71140F0F; Wed, 8 Jul 2015 09:48:23 +0000 (UTC) Received: by smtp.codeaurora.org (Postfix, from userid 486) id 7F890140F17; Wed, 8 Jul 2015 09:48:23 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Spam-Level: X-Spam-Status: No, score=-4.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_MED, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 Received: from blr-ubuntu-34.ap.qualcomm.com (unknown [202.46.23.61]) (using TLSv1.1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) (Authenticated sender: rnayak@smtp.codeaurora.org) by smtp.codeaurora.org (Postfix) with ESMTPSA id EB24D140F0F; Wed, 8 Jul 2015 09:48:19 +0000 (UTC) From: Rajendra Nayak To: linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org Subject: [PATCH 2/9] thermal: qcom: tsens-8916: Add support for 8916 family of SoCs Date: Wed, 8 Jul 2015 15:17:11 +0530 Message-Id: <1436348838-22671-3-git-send-email-rnayak@codeaurora.org> X-Mailer: git-send-email 1.8.2.1 In-Reply-To: <1436348838-22671-1-git-send-email-rnayak@codeaurora.org> References: <1436348838-22671-1-git-send-email-rnayak@codeaurora.org> X-Virus-Scanned: ClamAV using ClamSMTP X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20150708_024841_661818_C9CC651C X-CRM114-Status: GOOD ( 25.16 ) X-Spam-Score: -2.7 (--) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: srinivas.kandagatla@linaro.org, Rajendra Nayak , sboyd@codeaurora.org, lina.iyer@linaro.org, nrajan@codeaurora.org MIME-Version: 1.0 Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Virus-Scanned: ClamAV using ClamSMTP Add support to calibrate sensors on 8916 family and also add common functions to read temperature from sensors (This can be reused on other SoCs having similar TSENS device) The calibration data is read from eeprom using the generic eeprom framework apis. Based on the original code by Siddartha Mohanadoss and Stephen Boyd. Signed-off-by: Rajendra Nayak --- drivers/thermal/qcom/Makefile | 2 +- drivers/thermal/qcom/tsens-8916.c | 107 ++++++++++++++++++++++++++++++ drivers/thermal/qcom/tsens-common.c | 128 ++++++++++++++++++++++++++++++++++++ drivers/thermal/qcom/tsens.h | 11 ++++ 4 files changed, 247 insertions(+), 1 deletion(-) create mode 100644 drivers/thermal/qcom/tsens-8916.c create mode 100644 drivers/thermal/qcom/tsens-common.c diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile index 401069b..05c98e4 100644 --- a/drivers/thermal/qcom/Makefile +++ b/drivers/thermal/qcom/Makefile @@ -1,2 +1,2 @@ obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o -qcom_tsens-y += tsens.o +qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o diff --git a/drivers/thermal/qcom/tsens-8916.c b/drivers/thermal/qcom/tsens-8916.c new file mode 100644 index 0000000..a69aea3 --- /dev/null +++ b/drivers/thermal/qcom/tsens-8916.c @@ -0,0 +1,107 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include "tsens.h" + +/* eeprom layout data for 8916 */ +#define BASE0_MASK 0x0000007f +#define BASE1_MASK 0xfe000000 +#define BASE0_SHIFT 0 +#define BASE1_SHIFT 25 + +#define S0_P1_MASK 0x00000f80 +#define S1_P1_MASK 0x003e0000 +#define S2_P1_MASK 0xf8000000 +#define S3_P1_MASK 0x000003e0 +#define S4_P1_MASK 0x000f8000 + +#define S0_P2_MASK 0x0001f000 +#define S1_P2_MASK 0x07c00000 +#define S2_P2_MASK 0x0000001f +#define S3_P2_MASK 0x00007c00 +#define S4_P2_MASK 0x01f00000 + +#define S0_P1_SHIFT 7 +#define S1_P1_SHIFT 17 +#define S2_P1_SHIFT 27 +#define S3_P1_SHIFT 5 +#define S4_P1_SHIFT 15 + +#define S0_P2_SHIFT 12 +#define S1_P2_SHIFT 22 +#define S2_P2_SHIFT 0 +#define S3_P2_SHIFT 10 +#define S4_P2_SHIFT 20 + +#define CAL_SEL_MASK 0xe0000000 +#define CAL_SEL_SHIFT 29 + +static int calibrate_8916(struct tsens_device *tmdev) +{ + int base0 = 0, base1 = 0, i; + u32 p1[5], p2[5]; + int mode = 0; + u32 *qfprom_cdata, *qfprom_csel; + + qfprom_cdata = (u32 *)qfprom_read(tmdev->dev, "calib"); + if (IS_ERR(qfprom_cdata)) + return PTR_ERR(qfprom_cdata); + + qfprom_csel = (u32 *)qfprom_read(tmdev->dev, "calib_sel"); + if (IS_ERR(qfprom_csel)) + return PTR_ERR(qfprom_csel); + + mode = (qfprom_csel[0] & CAL_SEL_MASK) >> CAL_SEL_SHIFT; + dev_dbg(tmdev->dev, "calibration mode is %d\n", mode); + + switch (mode) { + case TWO_PT_CALIB: + base1 = (qfprom_cdata[1] & BASE1_MASK) >> BASE1_SHIFT; + p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT; + p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT; + p2[2] = (qfprom_cdata[1] & S2_P2_MASK) >> S2_P2_SHIFT; + p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT; + p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT; + for (i = 0; i < tmdev->num_sensors; i++) + p2[i] = ((base1 + p2[i]) << 3); + /* Fall through */ + case ONE_PT_CALIB2: + base0 = (qfprom_cdata[0] & BASE0_MASK); + p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT; + p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT; + p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT; + p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT; + p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT; + for (i = 0; i < tmdev->num_sensors; i++) + p1[i] = (((base0) + p1[i]) << 3); + break; + default: + for (i = 0; i < tmdev->num_sensors; i++) { + p1[i] = 500; + p2[i] = 780; + } + break; + } + + compute_intercept_slope(tmdev, p1, p2, mode); + + return 0; +} + +const struct tsens_ops ops_8916 = { + .init = init_common, + .calibrate = calibrate_8916, + .get_temp = get_temp_common, +}; diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c new file mode 100644 index 0000000..5fcabd1 --- /dev/null +++ b/drivers/thermal/qcom/tsens-common.c @@ -0,0 +1,128 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include "tsens.h" + +#define S0_ST_ADDR 0x1030 +#define SN_ADDR_OFFSET 0x4 +#define SN_ST_TEMP_MASK 0x3ff +#define CAL_DEGC_PT1 30 +#define CAL_DEGC_PT2 120 +#define SLOPE_FACTOR 1000 + +char *qfprom_read(struct device *dev, const char *cname) +{ + struct nvmem_cell *cell; + ssize_t data; + char *ret; + + cell = nvmem_cell_get(dev, cname); + if (IS_ERR(cell)) + return ERR_CAST(cell); + + ret = nvmem_cell_read(cell, &data); + nvmem_cell_put(cell); + return ret; +} + +void compute_intercept_slope(struct tsens_device *tmdev, u32 *p1, + u32 *p2, u32 mode) +{ + int i; + int num, den; + + for (i = 0; i < tmdev->num_sensors; i++) { + dev_dbg(tmdev->dev, + "sensor%d - data_point1:%#x data_point2:%#x\n", + i, p1[i], p2[i]); + + if (mode == TWO_PT_CALIB) { + /* slope (m) = adc_code2 - adc_code1 (y2 - y1)/ + temp_120_degc - temp_30_degc (x2 - x1) */ + num = p2[i] - p1[i]; + num *= SLOPE_FACTOR; + den = CAL_DEGC_PT2 - CAL_DEGC_PT1; + tmdev->sensor[i].slope = num / den; + } + + tmdev->sensor[i].offset = (p1[i] * SLOPE_FACTOR) - + (CAL_DEGC_PT1 * + tmdev->sensor[i].slope); + dev_dbg(tmdev->dev, "offset:%d\n", tmdev->sensor[i].offset); + } +} + +static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s) +{ + int degc, num, den; + + num = (adc_code * SLOPE_FACTOR) - s->offset; + den = s->slope; + + if (num > 0) + degc = num + (den / 2); + else if (num < 0) + degc = num - (den / 2); + else + degc = num; + + degc /= den; + + return degc; +} + +int get_temp_common(struct tsens_device *tmdev, int id, long *temp) +{ + struct tsens_sensor *s = &tmdev->sensor[id]; + u32 code; + unsigned int sensor_addr; + int last_temp = 0, ret; + + sensor_addr = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET; + ret = regmap_read(tmdev->map, sensor_addr, &code); + if (ret) + return ret; + last_temp = code & SN_ST_TEMP_MASK; + + *temp = code_to_degc(last_temp, s) * 1000; + + return 0; +} + +static const struct regmap_config tsens_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +int init_common(struct tsens_device *tmdev) +{ + void __iomem *base; + + base = of_iomap(tmdev->dev->of_node, 0); + if (IS_ERR(base)) + return -EINVAL; + + tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config); + if (!tmdev->map) + return -ENODEV; + + return 0; +} diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h index 9b274e1..81c5efb 100644 --- a/drivers/thermal/qcom/tsens.h +++ b/drivers/thermal/qcom/tsens.h @@ -13,6 +13,10 @@ #ifndef __QCOM_TSENS_H__ #define __QCOM_TSENS_H__ +#define ONE_PT_CALIB 0x1 +#define ONE_PT_CALIB2 0x2 +#define TWO_PT_CALIB 0x3 + struct tsens_device; struct tsens_sensor { @@ -55,4 +59,11 @@ struct tsens_device { struct tsens_sensor sensor[0]; }; +char *qfprom_read(struct device *, const char *); +void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32); +int init_common(struct tsens_device *); +int get_temp_common(struct tsens_device *, int, long *); + +extern const struct tsens_ops ops_8916; + #endif /* __QCOM_TSENS_H__ */