| Message ID | 1437431152-6730-1-git-send-email-agross@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 07/20, Andy Gross wrote: > This patch creates a platform driver for the SCM so that we can adequately > manage resources. This removes clients having to carry the necessary > clocks to use the SCM resources. > > Signed-off-by: Andy Gross <agross@codeaurora.org> > --- It would be nice if we could use this platform device for doing the DMAish memory allocations that we do in this driver too. I guess one complication there is that we would need to allocate memory with the DMA APIs before CPUs are brought up (early_initcall level). > diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c > index 45c008d..5dd0514 100644 > --- a/drivers/firmware/qcom_scm.c > +++ b/drivers/firmware/qcom_scm.c > @@ -15,14 +15,57 @@ > * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA > * 02110-1301, USA. > */ > - > +#include <linux/platform_device.h> > +#include <linux/module.h> > +#include <linux/platform_device.h> This include is here twice. > #include <linux/cpumask.h> > #include <linux/export.h> > #include <linux/types.h> > #include <linux/qcom_scm.h> > +#include <linux/of.h> > +#include <linux/clk.h> > [...] > + > +/** > + * qcom_scm_is_available() - Checks if SCM is available > + */ > +bool qcom_scm_is_available(void) > +{ > + return !!__scm; > +} > +EXPORT_SYMBOL(qcom_scm_is_available); > + > +static int qcom_scm_remove(struct platform_device *pdev) > +{ > + __scm = NULL; > + > + return 0; > +} Maybe we just shouldn't allow this? The firmware isn't going anywhere at runtime, and this driver is currently marked as bool in the Kconfig. > + > +static const struct of_device_id qcom_scm_dt_match[] = { > + { .compatible = "qcom,scm",}, > + {}, > +}; > + > +MODULE_DEVICE_TABLE(of, qcom_scm_dt_match); > + > +static struct platform_driver qcom_scm_driver = { > + .driver = { > + .name = "scm", Maybe 'qcom_scm' ? > + .of_match_table = qcom_scm_dt_match, > + }, > + .probe = qcom_scm_probe, > + .remove = qcom_scm_remove, > +}; > + > +module_platform_driver(qcom_scm_driver); Isn't there some sort of builtin_platform_driver() macro for builtin modules?
On Thu, Sep 03, 2015 at 02:33:22PM -0700, Stephen Boyd wrote: > On 07/20, Andy Gross wrote: > > This patch creates a platform driver for the SCM so that we can adequately > > manage resources. This removes clients having to carry the necessary > > clocks to use the SCM resources. > > > > Signed-off-by: Andy Gross <agross@codeaurora.org> > > --- > > It would be nice if we could use this platform device for doing > the DMAish memory allocations that we do in this driver too. I > guess one complication there is that we would need to allocate > memory with the DMA APIs before CPUs are brought up > (early_initcall level). Yeah that's one thing we could do but we'd have to defer the memory stuff until it's used the first time (specific calls require it). > > > diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c > > index 45c008d..5dd0514 100644 > > --- a/drivers/firmware/qcom_scm.c > > +++ b/drivers/firmware/qcom_scm.c > > @@ -15,14 +15,57 @@ > > * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA > > * 02110-1301, USA. > > */ > > - > > +#include <linux/platform_device.h> > > +#include <linux/module.h> > > +#include <linux/platform_device.h> > > This include is here twice. > > > #include <linux/cpumask.h> > > #include <linux/export.h> > > #include <linux/types.h> > > #include <linux/qcom_scm.h> > > +#include <linux/of.h> > > +#include <linux/clk.h> > > > [...] > > + > > +/** > > + * qcom_scm_is_available() - Checks if SCM is available > > + */ > > +bool qcom_scm_is_available(void) > > +{ > > + return !!__scm; > > +} > > +EXPORT_SYMBOL(qcom_scm_is_available); > > + > > +static int qcom_scm_remove(struct platform_device *pdev) > > +{ > > + __scm = NULL; > > + > > + return 0; > > +} > > Maybe we just shouldn't allow this? The firmware isn't going > anywhere at runtime, and this driver is currently marked as > bool in the Kconfig. Fair enough. > > > + > > +static const struct of_device_id qcom_scm_dt_match[] = { > > + { .compatible = "qcom,scm",}, > > + {}, > > +}; > > + > > +MODULE_DEVICE_TABLE(of, qcom_scm_dt_match); > > + > > +static struct platform_driver qcom_scm_driver = { > > + .driver = { > > + .name = "scm", > > Maybe 'qcom_scm' ? yeah i should have used that. > > > + .of_match_table = qcom_scm_dt_match, > > + }, > > + .probe = qcom_scm_probe, > > + .remove = qcom_scm_remove, > > +}; > > + > > +module_platform_driver(qcom_scm_driver); > > Isn't there some sort of builtin_platform_driver() macro for > builtin modules? I'll take a look and convert.
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt new file mode 100644 index 0000000..debcd32 --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt @@ -0,0 +1,25 @@ +QCOM Secure Channel Manager (SCM) + +Qualcomm processors include an interface to communicate to the secure firmware. +This interface allows for clients to request different types of actions. These +can include CPU power up/down, HDCP requests, loading of firmware, and other +assorted actions. + +Required properties: +- compatible: must contain "qcom,scm" +- clocks: Should contain the core, iface, and bus clocks. +- clock-names: Must contain "core" for the core clock, "iface" for the interface + clock and "bus" for the bus clock. + +Example: + + firmware { + compatible = "simple-bus"; + + scm { + compatible = "qcom,scm"; + clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; + clock-names = "core", "bus", "iface"; + }; + }; + diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c index 45c008d..5dd0514 100644 --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c @@ -15,14 +15,57 @@ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA * 02110-1301, USA. */ - +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/platform_device.h> #include <linux/cpumask.h> #include <linux/export.h> #include <linux/types.h> #include <linux/qcom_scm.h> +#include <linux/of.h> +#include <linux/clk.h> #include "qcom_scm.h" +struct qcom_scm { + struct clk *core_clk; + struct clk *iface_clk; + struct clk *bus_clk; +}; + +static struct qcom_scm *__scm; + +static int qcom_scm_clk_enable(void) +{ + int ret; + + ret = clk_prepare_enable(__scm->core_clk); + if (ret) + goto bail; + ret = clk_prepare_enable(__scm->iface_clk); + if (ret) + goto disable_core; + ret = clk_prepare_enable(__scm->bus_clk); + if (ret) + goto disable_iface; + + return 0; + +disable_iface: + clk_disable_unprepare(__scm->iface_clk); +disable_core: + clk_disable_unprepare(__scm->core_clk); +bail: + return ret; +} + +static void qcom_scm_clk_disable(void) +{ + clk_disable_unprepare(__scm->core_clk); + clk_disable_unprepare(__scm->iface_clk); + clk_disable_unprepare(__scm->bus_clk); +} + /** * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus * @entry: Entry point function for the cpus @@ -72,11 +115,17 @@ EXPORT_SYMBOL(qcom_scm_cpu_power_down); */ bool qcom_scm_hdcp_available(void) { - int ret; + int ret = qcom_scm_clk_enable(); + + if (ret) + goto clk_err; ret = __qcom_scm_is_call_available(QCOM_SCM_SVC_HDCP, - QCOM_SCM_CMD_HDCP); + QCOM_SCM_CMD_HDCP); + + qcom_scm_clk_disable(); +clk_err: return (ret > 0) ? true : false; } EXPORT_SYMBOL(qcom_scm_hdcp_available); @@ -91,6 +140,87 @@ EXPORT_SYMBOL(qcom_scm_hdcp_available); */ int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp) { - return __qcom_scm_hdcp_req(req, req_cnt, resp); + int ret = qcom_scm_clk_enable(); + + if (ret) + return ret; + + ret = __qcom_scm_hdcp_req(req, req_cnt, resp); + qcom_scm_clk_disable(); + return ret; } EXPORT_SYMBOL(qcom_scm_hdcp_req); + +/** + * qcom_scm_is_available() - Checks if SCM is available + */ +bool qcom_scm_is_available(void) +{ + return !!__scm; +} +EXPORT_SYMBOL(qcom_scm_is_available); + +static int qcom_scm_remove(struct platform_device *pdev) +{ + __scm = NULL; + + return 0; +} + +static int qcom_scm_probe(struct platform_device *pdev) +{ + struct qcom_scm *scm; + int ret; + + scm = devm_kzalloc(&pdev->dev, sizeof(*scm), GFP_KERNEL); + if (!scm) + return -ENOMEM; + + scm->core_clk = devm_clk_get(&pdev->dev, "core"); + if (IS_ERR(scm->core_clk)) { + if (PTR_ERR(scm->core_clk) != -EPROBE_DEFER) + dev_err(&pdev->dev, "failed to acquire core clk\n"); + return PTR_ERR(scm->core_clk); + } + + scm->iface_clk = devm_clk_get(&pdev->dev, "iface"); + if (IS_ERR(scm->iface_clk)) { + if (PTR_ERR(scm->iface_clk) != -EPROBE_DEFER) + dev_err(&pdev->dev, "failed to acquire iface clk\n"); + return PTR_ERR(scm->iface_clk); + } + + scm->bus_clk = devm_clk_get(&pdev->dev, "bus"); + if (IS_ERR(scm->bus_clk)) { + if (PTR_ERR(scm->bus_clk) != -EPROBE_DEFER) + dev_err(&pdev->dev, "failed to acquire bus clk\n"); + return PTR_ERR(scm->bus_clk); + } + + /* vote for max clk rate for highest performance */ + ret = clk_set_rate(scm->core_clk, INT_MAX); + if (ret) + return ret; + + __scm = scm; + + return 0; +} + +static const struct of_device_id qcom_scm_dt_match[] = { + { .compatible = "qcom,scm",}, + {}, +}; + +MODULE_DEVICE_TABLE(of, qcom_scm_dt_match); + +static struct platform_driver qcom_scm_driver = { + .driver = { + .name = "scm", + .of_match_table = qcom_scm_dt_match, + }, + .probe = qcom_scm_probe, + .remove = qcom_scm_remove, +}; + +module_platform_driver(qcom_scm_driver);
This patch creates a platform driver for the SCM so that we can adequately manage resources. This removes clients having to carry the necessary clocks to use the SCM resources. Signed-off-by: Andy Gross <agross@codeaurora.org> --- .../devicetree/bindings/firmware/qcom,scm.txt | 25 ++++ drivers/firmware/qcom_scm.c | 138 +++++++++++++++++++- 2 files changed, 159 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/firmware/qcom,scm.txt