| Message ID | 1437794486-21134-5-git-send-email-wangzhou1@hisilicon.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 2015/7/25 11:21, Zhou Wang wrote: > This patch adds related DTS binding document for HiSilicon PCIe host driver. > > Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Hi Arnd and Rob, As Bjorn mentioned in v4 series, this patch need your ack. Could you help to review this patch? Thanks, Zhou > --- > .../devicetree/bindings/pci/hisilicon-pcie.txt | 46 ++++++++++++++++++++++ > 1 file changed, 46 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt > > diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt > new file mode 100644 > index 0000000..2afc9d1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt > @@ -0,0 +1,46 @@ > +HiSilicon PCIe host bridge DT description > + > +HiSilicon PCIe host controller is based on Designware PCI core. > +It shares common functions with PCIe Designware core driver and inherits > +common properties defined in > +Documentation/devicetree/bindings/pci/designware-pci.txt. > + > +Additional properties are described here: > + > +Required properties: > +- compatible: Should contain "hisilicon,hip05-pcie". > +- reg: Should contain rc_dbi, subctrl, config registers location and length. > +- reg-names: Must include the following entries: > + "rc_dbi": controller configuration registers; > + "subctrl": whole PCIe hosts configuration registers; > + "config": PCIe configuration space registers. > +- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts. > +- port-id: Should be 0, 1, 2 or 3. > + > +Optional properties: > +- status: Either "ok" or "disabled". > +- dma-coherent: Present if DMA operations are coherent. > + > +Example: > + pcie@0xb0080000 { > + compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; > + reg = <0 0xb0080000 0 0x10000>, <0 0xb0000000 0 0x10000>, > + <0x220 0x00000000 0 0x2000>; > + reg-names = "rc_dbi", "subctrl", "config"; > + bus-range = <0 15>; > + msi-parent = <&its_pcie>; > + #address-cells = <3>; > + #size-cells = <2>; > + device_type = "pci"; > + dma-coherent; > + ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>; > + num-lanes = <8>; > + port-id = <1>; > + #interrupts-cells = <1>; > + interrupts-map-mask = <0xf800 0 0 7>; > + interrupts-map = <0x0 0 0 1 &mbigen_pcie 1 10 > + 0x0 0 0 2 &mbigen_pcie 2 11 > + 0x0 0 0 3 &mbigen_pcie 3 12 > + 0x0 0 0 4 &mbigen_pcie 4 13>; > + status = "ok"; > + }; >
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt new file mode 100644 index 0000000..2afc9d1 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -0,0 +1,46 @@ +HiSilicon PCIe host bridge DT description + +HiSilicon PCIe host controller is based on Designware PCI core. +It shares common functions with PCIe Designware core driver and inherits +common properties defined in +Documentation/devicetree/bindings/pci/designware-pci.txt. + +Additional properties are described here: + +Required properties: +- compatible: Should contain "hisilicon,hip05-pcie". +- reg: Should contain rc_dbi, subctrl, config registers location and length. +- reg-names: Must include the following entries: + "rc_dbi": controller configuration registers; + "subctrl": whole PCIe hosts configuration registers; + "config": PCIe configuration space registers. +- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts. +- port-id: Should be 0, 1, 2 or 3. + +Optional properties: +- status: Either "ok" or "disabled". +- dma-coherent: Present if DMA operations are coherent. + +Example: + pcie@0xb0080000 { + compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; + reg = <0 0xb0080000 0 0x10000>, <0 0xb0000000 0 0x10000>, + <0x220 0x00000000 0 0x2000>; + reg-names = "rc_dbi", "subctrl", "config"; + bus-range = <0 15>; + msi-parent = <&its_pcie>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>; + num-lanes = <8>; + port-id = <1>; + #interrupts-cells = <1>; + interrupts-map-mask = <0xf800 0 0 7>; + interrupts-map = <0x0 0 0 1 &mbigen_pcie 1 10 + 0x0 0 0 2 &mbigen_pcie 2 11 + 0x0 0 0 3 &mbigen_pcie 3 12 + 0x0 0 0 4 &mbigen_pcie 4 13>; + status = "ok"; + };
This patch adds related DTS binding document for HiSilicon PCIe host driver. Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> --- .../devicetree/bindings/pci/hisilicon-pcie.txt | 46 ++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt