diff mbox

[v2,1/3] ARM: dts: apq8064: remove temporary fixed regulator for mmc

Message ID 1438071171-30108-1-git-send-email-srinivas.kandagatla@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Srinivas Kandagatla July 28, 2015, 8:12 a.m. UTC 
This patch removes temporary fixed regluator use for mmc.
Board files should use the regulators which are wiredup appropriately.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 12 ------------
 1 file changed, 12 deletions(-)

Comments

Andy Gross July 28, 2015, 8 p.m. UTC | #1 
On Tue, Jul 28, 2015 at 09:12:51AM +0100, Srinivas Kandagatla wrote:
> This patch removes temporary fixed regluator use for mmc.
> Board files should use the regulators which are wiredup appropriately.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---

Applied.  Thanks!
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index bc5de9b..cba4ccb 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -523,14 +523,6 @@ 
 		};
 
 		/* Temporary fixed regulator */
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-always-on;
-		};
-
 		sdcc1bam:dma@12402000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12402000 0x8000>;
@@ -580,7 +572,6 @@ 
 				non-removable;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
-				vmmc-supply = <&vsdcc_fixed>;
 				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
 				dma-names = "tx", "rx";
 			};
@@ -599,7 +590,6 @@ 
 				cap-mmc-highspeed;
 				max-frequency	= <192000000>;
 				no-1-8-v;
-				vmmc-supply = <&vsdcc_fixed>;
 				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
 				dma-names = "tx", "rx";
 			};
@@ -617,8 +607,6 @@ 
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
 				max-frequency	= <48000000>;
-				vmmc-supply = <&vsdcc_fixed>;
-				vqmmc-supply = <&vsdcc_fixed>;
 				dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";