From patchwork Fri Aug 14 10:30:20 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kenneth Lee X-Patchwork-Id: 7013961 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork1.web.kernel.org (Postfix) with ESMTP id 80F119F344 for ; Fri, 14 Aug 2015 10:30:14 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 0565520384 for ; Fri, 14 Aug 2015 10:30:13 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.9]) (using TLSv1.2 with cipher AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 6660B20380 for ; Fri, 14 Aug 2015 10:30:11 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1ZQCDX-0007kq-SB; Fri, 14 Aug 2015 10:28:07 +0000 Received: from szxga03-in.huawei.com ([119.145.14.66]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1ZQCDL-0007bV-Dj for linux-arm-kernel@lists.infradead.org; Fri, 14 Aug 2015 10:27:58 +0000 Received: from 172.24.1.47 (EHLO szxeml430-hub.china.huawei.com) ([172.24.1.47]) by szxrg03-dlp.huawei.com (MOS 4.4.3-GA FastPath queued) with ESMTP id BLA19513; Fri, 14 Aug 2015 18:23:23 +0800 (CST) Received: from localhost.localdomain (10.67.212.75) by szxeml430-hub.china.huawei.com (10.82.67.185) with Microsoft SMTP Server id 14.3.235.1; Fri, 14 Aug 2015 18:23:11 +0800 From: Kenneth Lee To: , , , , , , , , , , , , , , , , , , , Subject: [PATCH 3/5] net: add Hisilicon Network Subsystem MDIO support Date: Fri, 14 Aug 2015 18:30:20 +0800 Message-ID: <1439548222-231611-4-git-send-email-liguozhu@hisilicon.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1439548222-231611-1-git-send-email-liguozhu@hisilicon.com> References: <1439548222-231611-1-git-send-email-liguozhu@hisilicon.com> MIME-Version: 1.0 X-Originating-IP: [10.67.212.75] X-CFilter-Loop: Reflected X-Mirapoint-Virus-RAPID-Raw: score=unknown(0), refid=str=0001.0A020203.55CDC19E.019C, ss=1, re=0.000, recu=0.000, reip=0.000, cl=1, cld=1, fgs=0, ip=0.0.0.0, so=2013-05-26 15:14:31, dmn=2013-03-21 17:37:32 X-Mirapoint-Loop-Id: 706ec72f9cd7e169fc04a62719690318 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20150814_032756_629812_3B5FCC5D X-CRM114-Status: GOOD ( 17.94 ) X-Spam-Score: -4.2 (----) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Kenneth Lee Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Spam-Status: No, score=-5.2 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_MED, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP The MDIO support for Hisilicon Network Subsystem. It is used in Hislicon P660 and Hi1610 SoC to control the external PHY Signed-off-by: Yisen Zhuang Signed-off-by: Kenneth Lee --- drivers/net/ethernet/hisilicon/hns/hns_mdio_main.c | 597 +++++++++++++++++++++ 1 file changed, 597 insertions(+) create mode 100644 drivers/net/ethernet/hisilicon/hns/hns_mdio_main.c diff --git a/drivers/net/ethernet/hisilicon/hns/hns_mdio_main.c b/drivers/net/ethernet/hisilicon/hns/hns_mdio_main.c new file mode 100644 index 0000000..7113fa8 --- /dev/null +++ b/drivers/net/ethernet/hisilicon/hns/hns_mdio_main.c @@ -0,0 +1,597 @@ +/* + * Copyright (c) 2014-2015 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MDIO_DRV_NAME "hi-mdio" +#define MDIO_BUS_NAME "Hisilicon MII Bus" +#define MDIO_DRV_VERSION "1.1.0" +#define MDIO_COPYRIGHT "Copyright(c) 2015 Huawei Corporation." +#define MDIO_DRV_STRING MDIO_BUS_NAME +#define MDIO_DEFAULT_DEVICE_DESCR MDIO_BUS_NAME + +#define MDIO_CTL_DEV_ADDR(x) (x & 0x1f) +#define MDIO_CTL_PORT_ADDR(x) ((x & 0x1f) << 5) + +#define MDIO_BASE_ADDR 0x403C0000 +#define MDIO_REG_ADDR_LEN 0x1000 +#define MDIO_PHY_GRP_LEN 0x100 +#define MDIO_REG_LEN 0x10 +#define MDIO_PHY_ADDR_NUM 5 +#define MDIO_MAX_PHY_ADDR 0x1F +#define MDIO_MAX_PHY_REG_ADDR 0xFFFF + +#define MDIO_TIMEOUT 1000000 + +struct hns_mdio_device { + struct device *dev; + void *vbase; /* mdio reg base address */ + u8 phy_class[PHY_MAX_ADDR]; + u8 index; + u8 chip_id; + u8 gidx; /* global index */ +}; + +#define MDIO_COMMAND_REG 0x0 +#define MDIO_ADDR_REG 0x4 +#define MDIO_WDATA_REG 0x8 +#define MDIO_RDATA_REG 0xc +#define MDIO_STA_REG 0x10 + +#define MDIO_CMD_DEVAD_M 0x1f +#define MDIO_CMD_DEVAD_S 0 +#define MDIO_CMD_PRTAD_M 0x1f +#define MDIO_CMD_PRTAD_S 5 +#define MDIO_CMD_OP_M 0x3 +#define MDIO_CMD_OP_S 10 +#define MDIO_CMD_ST_M 0x3 +#define MDIO_CMD_ST_S 12 +#define MDIO_CMD_START_B 14 + +#define MDIO_ADDR_DATA_M 0xffff +#define MDIO_ADDR_DATA_S 0 + +#define MDIO_WDATA_DATA_M 0xffff +#define MDIO_WDATA_DATA_S 0 + +#define MDIO_RDATA_DATA_M 0xffff +#define MDIO_RDATA_DATA_S 0 + +#define MDIO_STATE_STA_B 0 + +enum mdio_st_clause { + MDIO_ST_CLAUSE_45 = 0, + MDIO_ST_CLAUSE_22 +}; + +enum mdio_c22_op_seq { + MDIO_C22_WRITE = 1, + MDIO_C22_READ = 2 +}; + +enum mdio_c45_op_seq { + MDIO_C45_WRITE_ADDR = 0, + MDIO_C45_WRITE_DATA, + MDIO_C45_READ_INCREMENT, + MDIO_C45_READ +}; + +static inline void mdio_write_reg(void *base, u32 reg, u32 value) +{ + u8 __iomem *reg_addr = ACCESS_ONCE(base); + + writel(value, reg_addr + reg); +} + +#define MDIO_WRITE_REG(a, reg, value) \ + mdio_write_reg((a)->vbase, (reg), (value)) + +static inline u32 mdio_read_reg(void *base, u32 reg) +{ + u8 __iomem *reg_addr = ACCESS_ONCE(base); + + return readl(reg_addr + reg); +} + +#define MDIO_READ_REG(a, reg) \ + mdio_read_reg((a)->vbase, (reg)) + +#define mdio_set_field(origin, mask, shift, val) \ + do { \ + (origin) &= (~((mask) << (shift))); \ + (origin) |= (((val) & (mask)) << (shift)); \ + } while (0) + +#define mdio_get_field(origin, mask, shift) (((origin) >> (shift)) & (mask)) + +static void mdio_set_reg_field(void *base, u32 reg, u32 mask, u32 shift, + u32 val) +{ + u32 origin = mdio_read_reg(base, reg); + + mdio_set_field(origin, mask, shift, val); + mdio_write_reg(base, reg, origin); +} + +#define MDIO_SET_REG_FIELD(dev, reg, mask, shift, val) \ + mdio_set_reg_field((dev)->vbase, (reg), (mask), (shift), (val)) + +static u32 mdio_get_reg_field(void *base, u32 reg, u32 mask, u32 shift) +{ + u32 origin; + + origin = mdio_read_reg(base, reg); + return mdio_get_field(origin, mask, shift); +} + +#define MDIO_GET_REG_FIELD(dev, reg, mask, shift) \ + mdio_get_reg_field((dev)->vbase, (reg), (mask), (shift)) + +#define MDIO_SET_REG_BIT(dev, reg, bit, val) \ + mdio_set_reg_field((dev)->vbase, (reg), 0x1ull, (bit), (val)) + +#define MDIO_GET_REG_BIT(dev, reg, bit) \ + mdio_get_reg_field((dev)->vbase, (reg), 0x1ull, (bit)) + +/** + *hns_mdio_read_hw - read phy regs + *@mdio_dev: mdio device + *@phy_addr:phy addr + *@is_c45: + *@page: + *@reg: reg + *@data:regs data + *return status + */ +static int hns_mdio_read_hw(struct hns_mdio_device *mdio_dev, u8 phy_addr, + u8 is_c45, u8 page, u16 reg, u16 *data) +{ + u32 cmd_reg_value; + u32 sta_reg_value; + u32 time_cnt; + + if (phy_addr > MDIO_MAX_PHY_ADDR) { + dev_err(mdio_dev->dev, "Wrong phy address: phy_addr(%x)\n", + phy_addr); + return -EINVAL; + } + + dev_dbg(mdio_dev->dev, "mdio(%d) base is %p\n", + mdio_dev->gidx, mdio_dev->vbase); + dev_dbg(mdio_dev->dev, + "phy_addr=%d, is_c45=%d, devad=%d, regnum=%#x!\n", + phy_addr, is_c45, page, reg); + + /* Step 1; waiting for MDIO_COMMAND_REG 's mdio_start==0, */ + /* after that can do read or write*/ + for (time_cnt = MDIO_TIMEOUT; time_cnt; time_cnt--) { + cmd_reg_value = MDIO_GET_REG_BIT(mdio_dev, + MDIO_COMMAND_REG, + MDIO_CMD_START_B); + if (!cmd_reg_value) + break; + } + if (cmd_reg_value) { + dev_err(mdio_dev->dev, "MDIO is busy!\n"); + return -EBUSY; + } + + if (!is_c45) { + cmd_reg_value = MDIO_ST_CLAUSE_22 << MDIO_CMD_ST_S; + cmd_reg_value |= MDIO_C22_READ << MDIO_CMD_OP_S; + cmd_reg_value |= + (phy_addr & MDIO_CMD_PRTAD_M) << MDIO_CMD_PRTAD_S; + cmd_reg_value |= (reg & MDIO_CMD_DEVAD_M) << MDIO_CMD_DEVAD_S; + cmd_reg_value |= 1 << MDIO_CMD_START_B; + + MDIO_WRITE_REG(mdio_dev, MDIO_COMMAND_REG, cmd_reg_value); + } else { + MDIO_SET_REG_FIELD(mdio_dev, MDIO_ADDR_REG, MDIO_ADDR_DATA_M, + MDIO_ADDR_DATA_S, reg); + + /* Step 2; config the cmd-reg to write addr*/ + cmd_reg_value = MDIO_ST_CLAUSE_45 << MDIO_CMD_ST_S; + cmd_reg_value |= MDIO_C45_WRITE_ADDR << MDIO_CMD_OP_S; + + /* mdio_st==2'b00: is configing port addr*/ + cmd_reg_value |= + (phy_addr & MDIO_CMD_PRTAD_M) << MDIO_CMD_PRTAD_S; + + /* mdio_st == 2'b00: is configing dev_addr*/ + cmd_reg_value |= (page & MDIO_CMD_DEVAD_M) << MDIO_CMD_DEVAD_S; + cmd_reg_value |= 1 << MDIO_CMD_START_B; + MDIO_WRITE_REG(mdio_dev, MDIO_COMMAND_REG, cmd_reg_value); + + /* Step 3; waiting for MDIO_COMMAND_REG 's mdio_start==0,*/ + /*check for read or write opt is finished */ + for (time_cnt = MDIO_TIMEOUT; time_cnt; time_cnt--) { + cmd_reg_value = MDIO_GET_REG_BIT(mdio_dev, + MDIO_COMMAND_REG, + MDIO_CMD_START_B); + if (!cmd_reg_value) + break; + } + if (cmd_reg_value) { + dev_err(mdio_dev->dev, "MDIO is busy\n"); + return -EBUSY; + } + + /* Step 4; config cmd-reg, send read opt */ + cmd_reg_value = MDIO_ST_CLAUSE_45 << MDIO_CMD_ST_S; + cmd_reg_value |= MDIO_C45_READ << MDIO_CMD_OP_S; + + /* mdio_st==2'b00: is configing port addr*/ + cmd_reg_value |= + (phy_addr & MDIO_CMD_PRTAD_M) << MDIO_CMD_PRTAD_S; + + /* mdio_st == 2'b00: is configing dev_addr*/ + cmd_reg_value |= (page & MDIO_CMD_DEVAD_M) << MDIO_CMD_DEVAD_S; + cmd_reg_value |= 1 << MDIO_CMD_START_B; + MDIO_WRITE_REG(mdio_dev, MDIO_COMMAND_REG, cmd_reg_value); + } + + /* Step 5; waiting for MDIO_COMMAND_REG 's mdio_start==0,*/ + /* check for read or write opt is finished */ + for (time_cnt = MDIO_TIMEOUT; time_cnt; time_cnt--) { + cmd_reg_value = MDIO_GET_REG_BIT(mdio_dev, + MDIO_COMMAND_REG, + MDIO_CMD_START_B); + if (!cmd_reg_value) + break; + } + if (cmd_reg_value) { + dev_err(mdio_dev->dev, "MDIO is busy\n"); + return -EBUSY; + } + + sta_reg_value = MDIO_GET_REG_BIT(mdio_dev, + MDIO_STA_REG, MDIO_STATE_STA_B); + if (sta_reg_value) { + dev_err(mdio_dev->dev, "MDIO Read failed!\n"); + return -EBUSY; + } + + /* Step 6; get out data*/ + *data = (u16)MDIO_GET_REG_FIELD(mdio_dev, MDIO_RDATA_REG, + MDIO_RDATA_DATA_M, MDIO_RDATA_DATA_S); + + return 0; +} + +/** + *hns_mdio_write_hw - write phy regs + *@mdio_dev: mdio device + *@phy_addr: phy addr + *@is_c45: 0 means the clause 22, none 0 means clause 45 + *@page: phy page addr + *@reg: phy reg + *@data: regs data + *return status + */ +static int hns_mdio_write_hw(struct hns_mdio_device *mdio_dev, u8 phy_addr, + u8 is_c45, u8 page, u16 reg, u16 data) +{ + u32 cmd_reg_value; + u32 time_cnt; + + if (phy_addr > MDIO_MAX_PHY_ADDR) { + dev_err(mdio_dev->dev, "Wrong phy address: phy_addr(%x)\n", + phy_addr); + return -EINVAL; + } + + dev_dbg(mdio_dev->dev, "mdio(%d) base is %p,write data=%d\n", + mdio_dev->gidx, mdio_dev->vbase, data); + dev_dbg(mdio_dev->dev, "phy_addr=%d, is_c45=%d, devad=%d, regnum=%#x\n", + phy_addr, is_c45, page, reg); + + /* Step 1; waiting for MDIO_COMMAND_REG 's mdio_start==0,*/ + /* after that can do read or wtrite*/ + for (time_cnt = MDIO_TIMEOUT; time_cnt; time_cnt--) { + cmd_reg_value = MDIO_GET_REG_BIT(mdio_dev, + MDIO_COMMAND_REG, + MDIO_CMD_START_B); + if (!cmd_reg_value) + break; + } + if (cmd_reg_value) { + dev_err(mdio_dev->dev, "MDIO is busy\n"); + return -EBUSY; + } + + if (!is_c45) { + MDIO_SET_REG_FIELD(mdio_dev, MDIO_WDATA_REG, MDIO_WDATA_DATA_M, + MDIO_WDATA_DATA_S, data); + + cmd_reg_value = MDIO_ST_CLAUSE_22 << MDIO_CMD_ST_S; + cmd_reg_value |= MDIO_C22_WRITE << MDIO_CMD_OP_S; + cmd_reg_value |= + (phy_addr & MDIO_CMD_PRTAD_M) << MDIO_CMD_PRTAD_S; + cmd_reg_value |= (reg & MDIO_CMD_DEVAD_M) << MDIO_CMD_DEVAD_S; + cmd_reg_value |= 1 << MDIO_CMD_START_B; + + MDIO_WRITE_REG(mdio_dev, MDIO_COMMAND_REG, cmd_reg_value); + } else { + /* Step 2; config the cmd-reg to write addr*/ + MDIO_SET_REG_FIELD(mdio_dev, MDIO_ADDR_REG, MDIO_ADDR_DATA_M, + MDIO_ADDR_DATA_S, reg); + + cmd_reg_value = MDIO_ST_CLAUSE_45 << MDIO_CMD_ST_S; + cmd_reg_value |= MDIO_C45_WRITE_ADDR << MDIO_CMD_OP_S; + + /* mdio_st==2'b00: is configing port addr*/ + cmd_reg_value |= + (phy_addr & MDIO_CMD_PRTAD_M) << MDIO_CMD_PRTAD_S; + + /* mdio_st == 2'b00: is configing dev_addr*/ + cmd_reg_value |= (page & MDIO_CMD_DEVAD_M) << MDIO_CMD_DEVAD_S; + cmd_reg_value |= 1 << MDIO_CMD_START_B; + MDIO_WRITE_REG(mdio_dev, MDIO_COMMAND_REG, cmd_reg_value); + + /* Step 3; waiting for MDIO_COMMAND_REG's mdio_start==0,*/ + /* check for read or write opt is finished */ + for (time_cnt = MDIO_TIMEOUT; time_cnt; time_cnt--) { + cmd_reg_value = MDIO_GET_REG_BIT(mdio_dev, + MDIO_COMMAND_REG, + MDIO_CMD_START_B); + if (!cmd_reg_value) + break; + } + if (cmd_reg_value) { + dev_err(mdio_dev->dev, "MDIO is busy\n"); + return -EBUSY; + } + + /* Step 4; config the data needed writing */ + MDIO_SET_REG_FIELD(mdio_dev, MDIO_WDATA_REG, MDIO_WDATA_DATA_M, + MDIO_WDATA_DATA_S, data); + + /* Step 5; config the cmd-reg for the write opt*/ + cmd_reg_value = MDIO_ST_CLAUSE_45 << MDIO_CMD_ST_S; + cmd_reg_value |= MDIO_C45_WRITE_DATA << MDIO_CMD_OP_S; + + /* mdio_st==2'b00: is configing port addr*/ + cmd_reg_value |= + (phy_addr & MDIO_CMD_PRTAD_M) << MDIO_CMD_PRTAD_S; + + /* mdio_st == 2'b00: is configing dev_addr*/ + cmd_reg_value |= (page & MDIO_CMD_DEVAD_M) << MDIO_CMD_DEVAD_S; + cmd_reg_value |= 1 << MDIO_CMD_START_B; + MDIO_WRITE_REG(mdio_dev, MDIO_COMMAND_REG, cmd_reg_value); + } + + return 0; +} + +/** + * hns_mdio_get_chip_id - get parent node's chip-id attribute + * @dpev: mdio platform device + * return chip id if found the chip-id, or return 0 + */ +static u32 hns_mdio_get_chip_id(struct platform_device *pdev) +{ + struct device_node *np; + u32 chip_id; + int ret; + + np = of_get_parent(pdev->dev.of_node); + if (!np) + return 0; + + ret = of_property_read_u32(np, "chip-id", &chip_id); + if (ret) + return 0; + + return chip_id; +} + +/** + * hns_mdio_write - access phy register + * @bus: mdio bus + * @phy_id: phy id + * @regnum: register num + * @value: register value + * + * Return 0 on success, negative on failure + */ +static int hns_mdio_write(struct mii_bus *bus, + int phy_id, int regnum, u16 value) +{ + int ret; + struct hns_mdio_device *mdio_dev = (struct hns_mdio_device *)bus->priv; + u8 devad = ((regnum >> 16) & 0x1f); + u8 is_c45 = !!(regnum & MII_ADDR_C45); + + ret = hns_mdio_write_hw(mdio_dev, phy_id, is_c45, devad, + (u16)(regnum & 0xffff), value); + if (ret) { + dev_err(&bus->dev, "write_phy_reg fail, phy_id=%d, devad=%d,regnum=%#x, value=%#x!\n", + phy_id, devad, regnum, value); + + return ret; + } + + return 0; +} + +/** + * hns_mdio_read - access phy register + * @bus: mdio bus + * @phy_id: phy id + * @regnum: register num + * @value: register value + * + * Return phy register value + */ +static int hns_mdio_read(struct mii_bus *bus, int phy_id, int regnum) +{ + int ret; + u16 reg_val = 0; + u8 devad = ((regnum >> 16) & 0x1f); + u8 is_c45 = !!(regnum & MII_ADDR_C45); + struct hns_mdio_device *mdio_dev = (struct hns_mdio_device *)bus->priv; + + ret = hns_mdio_read_hw(mdio_dev, phy_id, is_c45, devad, + (u16)(regnum & 0xffff), ®_val); + if (ret) { + dev_err(&bus->dev, "read_phy_reg fail, mdio_idx=%d, phy_id=%d, devad=%d,regnum=%#x!\n", + mdio_dev->gidx, phy_id, devad, regnum); + + return ret; + } + + return reg_val; +} + +/** + * hns_mdio_reset - reset mdio bus + * @bus: mdio bus + * + * Return 0 on success, negative on failure + */ +static int hns_mdio_reset(struct mii_bus *bus) +{ + return 0; +} + +/** + * hns_mdio_bus_name - get mdio bus name + * @name: mdio bus name + * @np: mdio device node pointer + */ +static void hns_mdio_bus_name(char *name, struct device_node *np) +{ + const u32 *addr; + u64 taddr = OF_BAD_ADDR; + + addr = of_get_address(np, 0, NULL, NULL); + if (addr) + taddr = of_translate_address(np, addr); + + snprintf(name, MII_BUS_ID_SIZE, "%s@%llx", np->name, + (unsigned long long)taddr); +} + +/** + * hns_mdio_probe - probe mdio device + * @pdev: mdio platform device + * + * Return 0 on success, negative on failure + */ +static int hns_mdio_probe(struct platform_device *pdev) +{ + struct device_node *np; + struct hns_mdio_device *mdio_dev; + struct mii_bus *new_bus; + struct resource *res; + int ret; + + if (!pdev) { + dev_err(NULL, "pdev is NULL!\r\n"); + return -ENODEV; + } + np = pdev->dev.of_node; + mdio_dev = devm_kzalloc(&pdev->dev, sizeof(*mdio_dev), GFP_KERNEL); + if (!mdio_dev) + return -ENOMEM; + + new_bus = devm_mdiobus_alloc(&pdev->dev); + if (!new_bus) { + dev_err(&pdev->dev, "mdiobus_alloc fail!\n"); + return -ENOMEM; + } + + new_bus->name = MDIO_BUS_NAME; + new_bus->read = hns_mdio_read; + new_bus->write = hns_mdio_write; + new_bus->reset = hns_mdio_reset; + new_bus->priv = mdio_dev; + hns_mdio_bus_name(new_bus->id, np); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mdio_dev->vbase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(mdio_dev->vbase)) { + ret = PTR_ERR(mdio_dev->vbase); + return -EFAULT; + } + mdio_dev->index = 0; + mdio_dev->chip_id = hns_mdio_get_chip_id(pdev); + mdio_dev->gidx = mdio_dev->chip_id; + mdio_dev->dev = &pdev->dev; + + new_bus->irq = devm_kcalloc(&pdev->dev, PHY_MAX_ADDR, + sizeof(int), GFP_KERNEL); + if (!new_bus->irq) + return -ENOMEM; + + new_bus->parent = &pdev->dev; + platform_set_drvdata(pdev, new_bus); + + ret = of_mdiobus_register(new_bus, np); + if (ret) { + dev_err(&pdev->dev, "Cannot register as MDIO bus!\n"); + platform_set_drvdata(pdev, NULL); + return ret; + } + + return 0; +} + +/** + * hns_mdio_remove - remove mdio device + * @pdev: mdio platform device + * + * Return 0 on success, negative on failure + */ +static int hns_mdio_remove(struct platform_device *pdev) +{ + struct hns_mdio_device *mdio_dev; + struct mii_bus *bus; + + bus = platform_get_drvdata(pdev); + mdio_dev = (struct hns_mdio_device *)bus->priv; + + mdiobus_unregister(bus); + platform_set_drvdata(pdev, NULL); + return 0; +} + +static const struct of_device_id hns_mdio_match[] = { + {.compatible = "hisilicon,mdio"}, + {} +}; + +static struct platform_driver hns_mdio_driver = { + .probe = hns_mdio_probe, + .remove = hns_mdio_remove, + .driver = { + .name = MDIO_DRV_NAME, + .of_match_table = hns_mdio_match, + }, +}; + +module_platform_driver(hns_mdio_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Huawei Tech. Co., Ltd."); +MODULE_DESCRIPTION("Hisilicon HNS MDIO driver"); +MODULE_ALIAS("platform:" MDIO_DRV_NAME);