diff mbox

[RFT] arm: collie_defconfig: convert to use libata PATA drivers

Message ID 1439571876-13758-6-git-send-email-b.zolnierkie@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Bartlomiej Zolnierkiewicz Aug. 14, 2015, 5:04 p.m. UTC
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts collie_defconfig to use libata PATA
drivers.

Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
Build tested only.
If you have affected hardware please test.  Thank you.

 arch/arm/configs/collie_defconfig | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

Comments

Dmitry Baryshkov Aug. 14, 2015, 5:25 p.m. UTC | #1
2015-08-14 20:04 GMT+03:00 Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>:
> IDE subsystem has been deprecated since 2009 and the majority
> (if not all) of Linux distributions have switched to use
> libata for ATA support exclusively.  However there are still
> some users (mostly old or/and embedded non-x86 systems) that
> have not converted from using IDE subsystem to libata PATA
> drivers.  This doesn't seem to be good thing in the long-term
> for Linux as while there is less and less PATA systems left
> in use:
>
> * testing efforts are divided between two subsystems
>
> * having duplicate drivers for same hardware confuses users
>
> This patch converts collie_defconfig to use libata PATA
> drivers.
>
> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Bartlomiej Zolnierkiewicz Feb. 4, 2016, 2:15 p.m. UTC | #2
Hi,

On Friday, August 14, 2015 08:25:45 PM Dmitry Eremin-Solenikov wrote:
> 2015-08-14 20:04 GMT+03:00 Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>:
> > IDE subsystem has been deprecated since 2009 and the majority
> > (if not all) of Linux distributions have switched to use
> > libata for ATA support exclusively.  However there are still
> > some users (mostly old or/and embedded non-x86 systems) that
> > have not converted from using IDE subsystem to libata PATA
> > drivers.  This doesn't seem to be good thing in the long-term
> > for Linux as while there is less and less PATA systems left
> > in use:
> >
> > * testing efforts are divided between two subsystems
> >
> > * having duplicate drivers for same hardware confuses users
> >
> > This patch converts collie_defconfig to use libata PATA
> > drivers.
> >
> > Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
> > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> 
> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>

Thank you.

Arnd/Olof, could you please merge this patch?

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
diff mbox

Patch

diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 6c56ad0..4e6b68f 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -43,8 +43,9 @@  CONFIG_MTD_SA1100=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=1024
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PCMCIA=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set