diff mbox

[v4,4/4] mfd: max77686: Split out regulator part from the DT binding

Message ID 1440406041-25071-5-git-send-email-javier@osg.samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Javier Martinez Canillas Aug. 24, 2015, 8:47 a.m. UTC
The Maxim MAX77686 PMIC is a multi-function device with regulators,
clocks and a RTC. The DT bindings for the clocks are in a separate
file but the bindings for the regulators are inside the mfd part.

To make it consistent with the clocks portion of the binding and
because is more natural to look for regulator bindings under the
bindings/regulator sub-directory, split the regulator portion of
the DT binding and add it as a separate file.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>

---

Changes in v4: None
Changes in v3:
- Add Krzysztof Kozlowski Reviewed-by tag to patch #4.
- Add Lee Jones Acked-by tag to patch #4.

Changes in v2:
- Use a generic name for the max77686 node in the regulator example.

 Documentation/devicetree/bindings/mfd/max77686.txt | 60 ++----------------
 .../devicetree/bindings/regulator/max77686.txt     | 71 ++++++++++++++++++++++
 2 files changed, 75 insertions(+), 56 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/max77686.txt

Comments

Lee Jones Aug. 24, 2015, 11:49 a.m. UTC | #1
On Mon, 24 Aug 2015, Javier Martinez Canillas wrote:

> The Maxim MAX77686 PMIC is a multi-function device with regulators,
> clocks and a RTC. The DT bindings for the clocks are in a separate
> file but the bindings for the regulators are inside the mfd part.
> 
> To make it consistent with the clocks portion of the binding and
> because is more natural to look for regulator bindings under the
> bindings/regulator sub-directory, split the regulator portion of
> the DT binding and add it as a separate file.
> 
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Acked-by: Lee Jones <lee.jones@linaro.org>
> 
> ---
> 
> Changes in v4: None
> Changes in v3:
> - Add Krzysztof Kozlowski Reviewed-by tag to patch #4.
> - Add Lee Jones Acked-by tag to patch #4.
> 
> Changes in v2:
> - Use a generic name for the max77686 node in the regulator example.
> 
>  Documentation/devicetree/bindings/mfd/max77686.txt | 60 ++----------------
>  .../devicetree/bindings/regulator/max77686.txt     | 71 ++++++++++++++++++++++
>  2 files changed, 75 insertions(+), 56 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/regulator/max77686.txt

Applied, thanks.

> diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
> index d2ed3c20a5c3..741e76688cf2 100644
> --- a/Documentation/devicetree/bindings/mfd/max77686.txt
> +++ b/Documentation/devicetree/bindings/mfd/max77686.txt
> @@ -7,8 +7,9 @@ different i2c slave address,presently for which we are statically creating i2c
>  client while probing.This document describes the binding for mfd device and
>  PMIC submodule.
>  
> -Binding for the built-in 32k clock generator block is defined separately
> -in bindings/clk/maxim,max77686.txt file.
> +Bindings for the built-in 32k clock generator block and
> +regulators are defined in ../clk/maxim,max77686.txt and
> +../regulator/max77686.txt respectively.
>  
>  Required properties:
>  - compatible : Must be "maxim,max77686";
> @@ -16,36 +17,6 @@ Required properties:
>  - interrupts : This i2c device has an IRQ line connected to the main SoC.
>  - interrupt-parent : The parent interrupt controller.
>  
> -Optional node:
> -- voltage-regulators : The regulators of max77686 have to be instantiated
> -  under subnode named "voltage-regulators" using the following format.
> -
> -	regulator_name {
> -		regulator-compatible = LDOn/BUCKn
> -		standard regulator constraints....
> -	};
> -	refer Documentation/devicetree/bindings/regulator/regulator.txt
> -
> -  The regulator node's name should be initialized with a string
> -to get matched with their hardware counterparts as follow:
> -
> -	-LDOn 	:	for LDOs, where n can lie in range 1 to 26.
> -		 	example: LDO1, LDO2, LDO26.
> -	-BUCKn 	:	for BUCKs, where n can lie in range 1 to 9.
> -			example: BUCK1, BUCK5, BUCK9.
> -
> -  Regulators which can be turned off during system suspend:
> -	-LDOn	:	2, 6-8, 10-12, 14-16,
> -	-BUCKn	:	1-4.
> -  Use standard regulator bindings for it ('regulator-off-in-suspend').
> -
> -  LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable
> -  control. To turn this feature on this property must be added to the regulator
> -  sub-node:
> -	- maxim,ena-gpios :	one GPIO specifier enable control (the gpio
> -				flags are actually ignored and always
> -				ACTIVE_HIGH is used)
> -
>  Example:
>  
>  	max77686: pmic@09 {
> @@ -53,27 +24,4 @@ Example:
>  		interrupt-parent = <&wakeup_eint>;
>  		interrupts = <26 0>;
>  		reg = <0x09>;
> -
> -		voltage-regulators {
> -			ldo11_reg: LDO11 {
> -				regulator-name = "vdd_ldo11";
> -				regulator-min-microvolt = <1900000>;
> -				regulator-max-microvolt = <1900000>;
> -				regulator-always-on;
> -			};
> -
> -			buck1_reg: BUCK1 {
> -				regulator-name = "vdd_mif";
> -				regulator-min-microvolt = <950000>;
> -				regulator-max-microvolt = <1300000>;
> -				regulator-always-on;
> -				regulator-boot-on;
> -			};
> -
> -			buck9_reg: BUCK9 {
> -				regulator-name = "CAM_ISP_CORE_1.2V";
> -				regulator-min-microvolt = <1000000>;
> -				regulator-max-microvolt = <1200000>;
> -				maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
> -			};
> -	}
> +	};
> diff --git a/Documentation/devicetree/bindings/regulator/max77686.txt b/Documentation/devicetree/bindings/regulator/max77686.txt
> new file mode 100644
> index 000000000000..0dded64d89d3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/max77686.txt
> @@ -0,0 +1,71 @@
> +Binding for Maxim MAX77686 regulators
> +
> +This is a part of the device tree bindings of MAX77686 multi-function device.
> +More information can be found in ../mfd/max77686.txt file.
> +
> +The MAX77686 PMIC has 9 high-efficiency Buck and 26 Low-DropOut (LDO)
> +regulators that can be controlled over I2C.
> +
> +Following properties should be present in main device node of the MFD chip.
> +
> +Optional node:
> +- voltage-regulators : The regulators of max77686 have to be instantiated
> +  under subnode named "voltage-regulators" using the following format.
> +
> +	regulator_name {
> +		regulator-compatible = LDOn/BUCKn
> +		standard regulator constraints....
> +	};
> +	refer Documentation/devicetree/bindings/regulator/regulator.txt
> +
> +  The regulator node's name should be initialized with a string
> +to get matched with their hardware counterparts as follow:
> +
> +	-LDOn 	:	for LDOs, where n can lie in range 1 to 26.
> +			example: LDO1, LDO2, LDO26.
> +	-BUCKn 	:	for BUCKs, where n can lie in range 1 to 9.
> +			example: BUCK1, BUCK5, BUCK9.
> +
> +  Regulators which can be turned off during system suspend:
> +	-LDOn	:	2, 6-8, 10-12, 14-16,
> +	-BUCKn	:	1-4.
> +  Use standard regulator bindings for it ('regulator-off-in-suspend').
> +
> +  LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable
> +  control. To turn this feature on this property must be added to the regulator
> +  sub-node:
> +	- maxim,ena-gpios :	one GPIO specifier enable control (the gpio
> +				flags are actually ignored and always
> +				ACTIVE_HIGH is used)
> +
> +Example:
> +
> +	max77686: pmic@09 {
> +		compatible = "maxim,max77686";
> +		interrupt-parent = <&wakeup_eint>;
> +		interrupts = <26 IRQ_TYPE_NONE>;
> +		reg = <0x09>;
> +
> +		voltage-regulators {
> +			ldo11_reg: LDO11 {
> +				regulator-name = "vdd_ldo11";
> +				regulator-min-microvolt = <1900000>;
> +				regulator-max-microvolt = <1900000>;
> +				regulator-always-on;
> +			};
> +
> +			buck1_reg: BUCK1 {
> +				regulator-name = "vdd_mif";
> +				regulator-min-microvolt = <950000>;
> +				regulator-max-microvolt = <1300000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			buck9_reg: BUCK9 {
> +				regulator-name = "CAM_ISP_CORE_1.2V";
> +				regulator-min-microvolt = <1000000>;
> +				regulator-max-microvolt = <1200000>;
> +				maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
> +			};
> +	};
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
index d2ed3c20a5c3..741e76688cf2 100644
--- a/Documentation/devicetree/bindings/mfd/max77686.txt
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -7,8 +7,9 @@  different i2c slave address,presently for which we are statically creating i2c
 client while probing.This document describes the binding for mfd device and
 PMIC submodule.
 
-Binding for the built-in 32k clock generator block is defined separately
-in bindings/clk/maxim,max77686.txt file.
+Bindings for the built-in 32k clock generator block and
+regulators are defined in ../clk/maxim,max77686.txt and
+../regulator/max77686.txt respectively.
 
 Required properties:
 - compatible : Must be "maxim,max77686";
@@ -16,36 +17,6 @@  Required properties:
 - interrupts : This i2c device has an IRQ line connected to the main SoC.
 - interrupt-parent : The parent interrupt controller.
 
-Optional node:
-- voltage-regulators : The regulators of max77686 have to be instantiated
-  under subnode named "voltage-regulators" using the following format.
-
-	regulator_name {
-		regulator-compatible = LDOn/BUCKn
-		standard regulator constraints....
-	};
-	refer Documentation/devicetree/bindings/regulator/regulator.txt
-
-  The regulator node's name should be initialized with a string
-to get matched with their hardware counterparts as follow:
-
-	-LDOn 	:	for LDOs, where n can lie in range 1 to 26.
-		 	example: LDO1, LDO2, LDO26.
-	-BUCKn 	:	for BUCKs, where n can lie in range 1 to 9.
-			example: BUCK1, BUCK5, BUCK9.
-
-  Regulators which can be turned off during system suspend:
-	-LDOn	:	2, 6-8, 10-12, 14-16,
-	-BUCKn	:	1-4.
-  Use standard regulator bindings for it ('regulator-off-in-suspend').
-
-  LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable
-  control. To turn this feature on this property must be added to the regulator
-  sub-node:
-	- maxim,ena-gpios :	one GPIO specifier enable control (the gpio
-				flags are actually ignored and always
-				ACTIVE_HIGH is used)
-
 Example:
 
 	max77686: pmic@09 {
@@ -53,27 +24,4 @@  Example:
 		interrupt-parent = <&wakeup_eint>;
 		interrupts = <26 0>;
 		reg = <0x09>;
-
-		voltage-regulators {
-			ldo11_reg: LDO11 {
-				regulator-name = "vdd_ldo11";
-				regulator-min-microvolt = <1900000>;
-				regulator-max-microvolt = <1900000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "CAM_ISP_CORE_1.2V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1200000>;
-				maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
-			};
-	}
+	};
diff --git a/Documentation/devicetree/bindings/regulator/max77686.txt b/Documentation/devicetree/bindings/regulator/max77686.txt
new file mode 100644
index 000000000000..0dded64d89d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max77686.txt
@@ -0,0 +1,71 @@ 
+Binding for Maxim MAX77686 regulators
+
+This is a part of the device tree bindings of MAX77686 multi-function device.
+More information can be found in ../mfd/max77686.txt file.
+
+The MAX77686 PMIC has 9 high-efficiency Buck and 26 Low-DropOut (LDO)
+regulators that can be controlled over I2C.
+
+Following properties should be present in main device node of the MFD chip.
+
+Optional node:
+- voltage-regulators : The regulators of max77686 have to be instantiated
+  under subnode named "voltage-regulators" using the following format.
+
+	regulator_name {
+		regulator-compatible = LDOn/BUCKn
+		standard regulator constraints....
+	};
+	refer Documentation/devicetree/bindings/regulator/regulator.txt
+
+  The regulator node's name should be initialized with a string
+to get matched with their hardware counterparts as follow:
+
+	-LDOn 	:	for LDOs, where n can lie in range 1 to 26.
+			example: LDO1, LDO2, LDO26.
+	-BUCKn 	:	for BUCKs, where n can lie in range 1 to 9.
+			example: BUCK1, BUCK5, BUCK9.
+
+  Regulators which can be turned off during system suspend:
+	-LDOn	:	2, 6-8, 10-12, 14-16,
+	-BUCKn	:	1-4.
+  Use standard regulator bindings for it ('regulator-off-in-suspend').
+
+  LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable
+  control. To turn this feature on this property must be added to the regulator
+  sub-node:
+	- maxim,ena-gpios :	one GPIO specifier enable control (the gpio
+				flags are actually ignored and always
+				ACTIVE_HIGH is used)
+
+Example:
+
+	max77686: pmic@09 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&wakeup_eint>;
+		interrupts = <26 IRQ_TYPE_NONE>;
+		reg = <0x09>;
+
+		voltage-regulators {
+			ldo11_reg: LDO11 {
+				regulator-name = "vdd_ldo11";
+				regulator-min-microvolt = <1900000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "CAM_ISP_CORE_1.2V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1200000>;
+				maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
+			};
+	};