diff mbox

[v5,3/6] dt/bindings: bcm2835: add binding documentation for bcm2835-aux

Message ID 1441359711-2800-4-git-send-email-kernel@martin.sperl.org (mailing list archive)
State New, archived
Headers show

Commit Message

Martin Sperl Sept. 4, 2015, 9:41 a.m. UTC
From: Martin Sperl <kernel@martin.sperl.org>

add binding documentation

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
---
 .../bindings/soc/bcm/brcm,bcm2835-aux.txt          |   27 ++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-aux.txt

--
1.7.10.4
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-aux.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-aux.txt
new file mode 100644
index 0000000..8b79cf3
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-aux.txt
@@ -0,0 +1,27 @@ 
+Broadcom BCM2835 auxiliar device enable register
+
+the BCM2835 contains 3 auxiliar devices (spi1/spi2/uart1)
+which need to get enabled via a shared register.
+
+Required properties:
+- compatible: Should be "brcm,bcm2835-aux".
+- reg: Should contain register location and length for the
+       enable register
+
+Example:
+
+aux_enable: aux_enable@0x7e215004 {
+	compatible = "bcrm,bcm2835-aux";
+	reg = <0x7e215004 0x04>;
+};
+
+Typically used in the respective auxiliar device descriptions
+like this:
+
+uart1: uart@7e215040 {
+	...
+	brcm,aux-enable = <&aux_enable 1>;
+	...
+};
+
+The name of the property can be device/driver specific.