| Message ID | 1442335861-7282-6-git-send-email-punit.agrawal@arm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Sep 15, 2015 at 05:51:01PM +0100, Punit Agrawal wrote: > The SCP firmware on Juno provides access to SoC sensors via the > SCPI. Add the sensor nodes to the device tree to enable this support. > > Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> > Cc: Sudeep Holla <sudeep.holla@arm.com> > --- > arch/arm64/boot/dts/arm/juno-base.dtsi | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi > index c624208..dd5158e 100644 > --- a/arch/arm64/boot/dts/arm/juno-base.dtsi > +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi > @@ -96,6 +96,11 @@ > clock-output-names = "pxlclk0", "pxlclk1"; > }; > }; > + > + scpi_sensors0: sensors { > + compatible = "arm,scpi-sensors"; > + #thermal-sensor-cells = <1>; > + }; > }; > > /include/ "juno-clocks.dtsi" > -- > 2.5.1 >
Liviu Dudau <Liviu.Dudau@arm.com> writes: > On Tue, Sep 15, 2015 at 05:51:01PM +0100, Punit Agrawal wrote: >> The SCP firmware on Juno provides access to SoC sensors via the >> SCPI. Add the sensor nodes to the device tree to enable this support. >> >> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> >> Cc: Rob Herring <robh+dt@kernel.org> >> Cc: Mark Rutland <mark.rutland@arm.com> >> Cc: Liviu Dudau <liviu.dudau@arm.com> > > Acked-by: Liviu Dudau <liviu.dudau@arm.com> Thanks Liviu! > >> Cc: Sudeep Holla <sudeep.holla@arm.com> >> --- >> arch/arm64/boot/dts/arm/juno-base.dtsi | 5 +++++ >> 1 file changed, 5 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi >> index c624208..dd5158e 100644 >> --- a/arch/arm64/boot/dts/arm/juno-base.dtsi >> +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi >> @@ -96,6 +96,11 @@ >> clock-output-names = "pxlclk0", "pxlclk1"; >> }; >> }; >> + >> + scpi_sensors0: sensors { >> + compatible = "arm,scpi-sensors"; >> + #thermal-sensor-cells = <1>; >> + }; >> }; >> >> /include/ "juno-clocks.dtsi" >> -- >> 2.5.1 >>
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index c624208..dd5158e 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -96,6 +96,11 @@ clock-output-names = "pxlclk0", "pxlclk1"; }; }; + + scpi_sensors0: sensors { + compatible = "arm,scpi-sensors"; + #thermal-sensor-cells = <1>; + }; }; /include/ "juno-clocks.dtsi"
The SCP firmware on Juno provides access to SoC sensors via the SCPI. Add the sensor nodes to the device tree to enable this support. Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> --- arch/arm64/boot/dts/arm/juno-base.dtsi | 5 +++++ 1 file changed, 5 insertions(+)