diff mbox

[v2,7/7] ARM: at91/dt: sama5d2 Xplained: add device pin muxing

Message ID 1442417823-15850-8-git-send-email-ludovic.desroches@atmel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Ludovic Desroches Sept. 16, 2015, 3:37 p.m. UTC
Add device pin muxing for the sama5d2 Xplained board.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
---
 arch/arm/boot/dts/at91-sama5d2_xplained.dts | 61 +++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

Comments

Linus Walleij Sept. 21, 2015, 6:29 p.m. UTC | #1
On Wed, Sep 16, 2015 at 8:37 AM, Ludovic Desroches
<ludovic.desroches@atmel.com> wrote:

> Add device pin muxing for the sama5d2 Xplained board.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox

Patch

diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index e8d63afd..dc23979 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -44,6 +44,7 @@ 
  */
 /dts-v1/;
 #include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
 
 / {
 	model = "Atmel SAMA5D2 Xplained";
@@ -92,6 +93,8 @@ 
 
 		apb {
 			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
 				status = "okay";
 
 				m25p80@0 {
@@ -102,25 +105,35 @@ 
 			};
 
 			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default>;
 				phy-mode = "rmii";
 				status = "okay";
 			};
 
 			uart1: serial@f8020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_default>;
 				status = "okay";
 			};
 
 			i2c0: i2c@f8028000 {
 				dmas = <0>, <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
 				status = "okay";
 			};
 
 			uart3: serial@fc008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3_default>;
 				status = "okay";
 			};
 
 			i2c1: i2c@fc028000 {
 				dmas = <0>, <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
 				status = "okay";
 
 				at24@54 {
@@ -129,6 +142,54 @@ 
 					pagesize = <16>;
 				};
 			};
+
+			pinctrl@fc038000 {
+				pinctrl_i2c0_default: i2c0_default {
+					pinmux = <PIN_PD21__TWD0>,
+						 <PIN_PD22__TWCK0>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_default: i2c1_default {
+					pinmux = <PIN_PD4__TWD1>,
+						 <PIN_PD5__TWCK1>;
+					bias-disable;
+				};
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PB14__GTXCK>,
+						 <PIN_PB15__GTXEN>,
+						 <PIN_PB16__GRXDV>,
+						 <PIN_PB17__GRXER>,
+						 <PIN_PB18__GRX0>,
+						 <PIN_PB19__GRX1>,
+						 <PIN_PB20__GTX0>,
+						 <PIN_PB21__GTX1>,
+						 <PIN_PB22__GMDC>,
+						 <PIN_PB23__GMDIO>;
+					bias-disable;
+				};
+
+				pinctrl_spi0_default: spi0_default {
+					pinmux = <PIN_PA14__SPI0_SPCK>,
+						 <PIN_PA15__SPI0_MOSI>,
+						 <PIN_PA16__SPI0_MISO>,
+						 <PIN_PA17__SPI0_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_uart1_default: uart1_default {
+					pinmux = <PIN_PD2__URXD1>,
+						 <PIN_PD3__UTXD1>;
+					bias-disable;
+				};
+
+				pinctrl_uart3_default: uart3_default {
+					pinmux = <PIN_PB11__URXD3>,
+						 <PIN_PB12__UTXD3>;
+					bias-disable;
+				};
+			};
 		};
 	};
 };