diff mbox

[v2,3/9] clk: rockchip: add clock controller for rk3036

Message ID 1442478540-15068-4-git-send-email-zhengxing@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

zhengxing Sept. 17, 2015, 8:28 a.m. UTC
Add the clock tree definition for the new rk3036 SoC.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
---

Changes in v2: None

 drivers/clk/rockchip/Makefile     |    1 +
 drivers/clk/rockchip/clk-rk3036.c |  504 +++++++++++++++++++++++++++++++++++++
 drivers/clk/rockchip/clk.h        |   30 +++
 3 files changed, 535 insertions(+)
 create mode 100644 drivers/clk/rockchip/clk-rk3036.c

Comments

Heiko Stübner Sept. 17, 2015, 9:47 a.m. UTC | #1
Hi,

Am Donnerstag, 17. September 2015, 16:28:54 schrieb Xing Zheng:
> Add the clock tree definition for the new rk3036 SoC.
> 
> Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>

missing a dt-bindings document in a separate patch. See "dt-bindings: add 
documentation of rk3668 clock controller" 
(http://lists.infradead.org/pipermail/linux-rockchip/2015-July/003396.html) 
for comparison.


> ---
> 
> Changes in v2: None
> 
>  drivers/clk/rockchip/Makefile     |    1 +
>  drivers/clk/rockchip/clk-rk3036.c |  504
> +++++++++++++++++++++++++++++++++++++ drivers/clk/rockchip/clk.h        |  
> 30 +++
>  3 files changed, 535 insertions(+)
>  create mode 100644 drivers/clk/rockchip/clk-rk3036.c
> 
> diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile
> index b27edd6..d599829 100644
> --- a/drivers/clk/rockchip/Makefile
> +++ b/drivers/clk/rockchip/Makefile
> @@ -10,6 +10,7 @@ obj-y	+= clk-inverter.o
>  obj-y	+= clk-mmc-phase.o
>  obj-$(CONFIG_RESET_CONTROLLER)	+= softrst.o
> 
> +obj-y	+= clk-rk3036.o
>  obj-y	+= clk-rk3188.o
>  obj-y	+= clk-rk3288.o
>  obj-y	+= clk-rk3368.o
> diff --git a/drivers/clk/rockchip/clk-rk3036.c
> b/drivers/clk/rockchip/clk-rk3036.c new file mode 100644
> index 0000000..724d467
> --- /dev/null
> +++ b/drivers/clk/rockchip/clk-rk3036.c
> @@ -0,0 +1,504 @@
> +/*
> + * Copyright (c) 2014 MundoReader S.L.
> + * Author: Heiko Stuebner <heiko@sntech.de>
> + *
> + * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
> + * Author: Xing Zheng <zhengxing@rock-chips.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/syscore_ops.h>
> +#include <dt-bindings/clock/rk3036-cru.h>
> +#include "clk.h"
> +
> +enum rk3036_plls {
> +	apll, dpll, gpll,
> +};
> +
> +static struct rockchip_pll_rate_table rk3036_pll_rates[] = {
> +	/* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */
> +	RK3036_PLL_RATE(1608000000, 1, 67, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1584000000, 1, 66, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1560000000, 1, 65, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1536000000, 1, 64, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1512000000, 1, 63, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1488000000, 1, 62, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1464000000, 1, 61, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1440000000, 1, 60, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1416000000, 1, 59, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1392000000, 1, 58, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1368000000, 1, 57, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1344000000, 1, 56, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1320000000, 1, 55, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1296000000, 1, 54, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1272000000, 1, 53, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1248000000, 1, 52, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1200000000, 1, 50, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1188000000, 2, 99, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0),
> +	RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0),
> +	RK3036_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 984000000, 1, 82, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 960000000, 1, 80, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 936000000, 1, 78, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 912000000, 1, 76, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 900000000, 4, 300, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 888000000, 1, 74, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 864000000, 1, 72, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 840000000, 1, 70, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 816000000, 1, 68, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 800000000, 6, 400, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 700000000, 6, 350, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 696000000, 1, 58, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 600000000, 1, 75, 3, 1, 1, 0),
> +	RK3036_PLL_RATE( 594000000, 2, 99, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 504000000, 1, 63, 3, 1, 1, 0),
> +	RK3036_PLL_RATE( 500000000, 6, 250, 2, 1, 1, 0),
> +	RK3036_PLL_RATE( 408000000, 1, 68, 2, 2, 1, 0),
> +	RK3036_PLL_RATE( 312000000, 1, 52, 2, 2, 1, 0),
> +	RK3036_PLL_RATE( 216000000, 1, 72, 4, 2, 1, 0),
> +	RK3036_PLL_RATE(  96000000, 1, 64, 4, 4, 1, 0),
> +	RK3036_PLL_RATE(0, 1, 0, 1, 1, 1, 0),

you shouldn't need a "0" rate entry I guess


> +	{ /* sentinel */ },
> +};
> +
> +#define RK3036_DIV_CPU_MASK		0x1f
> +#define RK3036_DIV_CPU_SHIFT		8
> +
> +#define RK3036_DIV_PERI_MASK		0xf
> +#define RK3036_DIV_PERI_SHIFT		0
> +#define RK3036_DIV_ACLK_MASK		0x7
> +#define RK3036_DIV_ACLK_SHIFT		4
> +#define RK3036_DIV_HCLK_MASK		0x3
> +#define RK3036_DIV_HCLK_SHIFT		8
> +#define RK3036_DIV_PCLK_MASK		0x7
> +#define RK3036_DIV_PCLK_SHIFT		12
> +
> +#define RK3036_CLKSEL1(_core_periph_div)					\
> +	{									\
> +		.reg = RK2928_CLKSEL_CON(1),					\
> +		.val = HIWORD_UPDATE(_core_periph_div, RK3036_DIV_PERI_MASK,	\
> +				RK3036_DIV_PERI_SHIFT)				\
> +	}
> +
> +#define RK3036_CPUCLK_RATE(_prate, _core_periph_div)			\
> +	{								\
> +		.prate = _prate,					\
> +		.divs = {						\
> +			RK3036_CLKSEL1(_core_periph_div),		\
> +		},							\
> +	}
> +
> +static struct rockchip_cpuclk_rate_table rk3036_cpuclk_rates[] __initdata =
> { +	RK3036_CPUCLK_RATE(816000000, 4),
> +	RK3036_CPUCLK_RATE(600000000, 4),
> +	RK3036_CPUCLK_RATE(312000000, 4),
> +};
> +
> +static const struct rockchip_cpuclk_reg_data rk3036_cpuclk_data = {
> +	.core_reg = RK2928_CLKSEL_CON(0),
> +	.div_core_shift = 0,
> +	.div_core_mask = 0x1f,
> +	.mux_core_shift = 7,
> +};
> +
> +PNAME(mux_pll_p)		= { "xin24m", "xin24m" };

looks like you overlooked the divider? Like

DIV(0, "xin24m_plldiv", "xin24m", 0,
		RK2928_CLKSEL_CON(4), 8, 5, DFLAGS),

PNAME(mux_pll_p)		= { "xin24m_plldiv", "xin24m" };

> +
> +PNAME(mux_armclk_p)		= { "apll", "gpll_armclk" };
> +PNAME(mux_busclk_p)		= { "apll", "dpll_cpu", "gpll_cpu" };

[...]

> +	/*
> +	 * Clock-Architecture Diagram 3
> +	 */
> +
> +	/* aclk_cpu gates */
> +	GATE(0, "sclk_intmem", "aclk_cpu", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(4), 12, GFLAGS), +	GATE(0, "aclk_strc_sys", "aclk_cpu",
> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 10, GFLAGS), +
> +	/* hclk_cpu gates */
> +	GATE(HCLK_ROM, "hclk_rom", "hclk_cpu", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(5), 6, GFLAGS), +
> +	/* pclk_cpu gates */
> +	GATE(PCLK_GRF, "pclk_grf", "pclk_cpu", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(5), 4, GFLAGS), +	GATE(PCLK_DDRUPCTL, "pclk_ddrupctl",
> "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 7, GFLAGS), +	GATE(ACLK_VCODEC,
> "pclk_acodec", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 14, GFLAGS),
> +	GATE(PCLK_HDMI, "pclk_hdmi", "pclk_cpu", 0, RK2928_CLKGATE_CON(3), 8,
> GFLAGS), +
> +	/* aclk_vio gates */
> +	GATE(ACLK_VIO, "aclk_vio", "aclk_disp1_pre", 0,
> +			RK2928_CLKGATE_CON(6), 13, GFLAGS),
> +	GATE(ACLK_LCDC, "aclk_lcdc", "aclk_disp1_pre", 0,
> +			RK2928_CLKGATE_CON(9), 6, GFLAGS),
> +
> +	GATE(HCLK_VIO_BUS, "hclk_vio_bus", "hclk_disp_pre", 0,
> +			RK2928_CLKGATE_CON(6), 12, GFLAGS),
> +	GATE(HCLK_LCDC, "hclk_lcdc", "hclk_disp_pre", 0,
> +			RK2928_CLKGATE_CON(9), 5, GFLAGS),
> +
> +	/* aclk_video gates */
> +	GATE(HCLK_LCDC, "hclk_vcodec", "hclk_disp_pre", 0,
> +			RK2928_CLKGATE_CON(3), 12, GFLAGS),

in big gate-block from diagram 3, please stick to the one-line format, like 
the rest of the gates here (diagram3 only)

> +
> +	/* xin24m gates */
> +	GATE(SCLK_PVTM_CORE, "sclk_pvtm_core", "xin24m", 0,
> RK2928_CLKGATE_CON(10), 0, GFLAGS), +	GATE(SCLK_PVTM_GPU, "sclk_pvtm_gpu",
> "xin24m", 0, RK2928_CLKGATE_CON(10), 1, GFLAGS), +
> +	/* aclk_peri gates */
> +	GATE(0, "aclk_peri_axi_matrix", "aclk_peri", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(4), 3, GFLAGS), +	GATE(0, "aclk_cpu_peri", "aclk_peri",
> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 2, GFLAGS), +	GATE(ACLK_DMAC2,
> "aclk_dmac2", "aclk_peri", 0, RK2928_CLKGATE_CON(5), 1, GFLAGS), +	GATE(0,
> "aclk_peri_niu", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 15,
> GFLAGS), +
> +	/* hclk_peri gates */
> +	GATE(0, "hclk_peri_matrix", "hclk_peri", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(4), 0, GFLAGS), +	GATE(0, "hclk_usb_peri", "hclk_peri",
> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 13, GFLAGS), +	GATE(0,
> "hclk_peri_arbi", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9),
> 14, GFLAGS), +	GATE(HCLK_NANDC, "hclk_nandc", "hclk_peri", 0,
> RK2928_CLKGATE_CON(5), 9, GFLAGS), +	GATE(HCLK_SDMMC, "hclk_sdmmc",
> "hclk_peri", 0, RK2928_CLKGATE_CON(5), 10, GFLAGS), +	GATE(HCLK_SDIO,
> "hclk_sdio", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 11, GFLAGS),
> +	GATE(HCLK_EMMC, "hclk_emmc", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 0,
> GFLAGS), +	GATE(HCLK_OTG0, "hclk_otg0", "hclk_peri", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(5), 13, GFLAGS), +	GATE(HCLK_OTG1, "hclk_otg1",
> "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(7), 13, GFLAGS),
> +	GATE(HCLK_I2S, "hclk_i2s", "hclk_peri", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(7), 2, GFLAGS), +	GATE(0, "hclk_sfc", "hclk_peri",
> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 14, GFLAGS), +	GATE(0,
> "hclk_mac", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 15,
> GFLAGS), +
> +	/* pclk_peri gates */
> +	GATE(0, "pclk_peri_matrix", "pclk_peri", CLK_IGNORE_UNUSED,
> RK2928_CLKGATE_CON(4), 1, GFLAGS), +	GATE(0, "pclk_efuse", "pclk_peri",
> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 2, GFLAGS), +	GATE(PCLK_TIMER,
> "pclk_timer0", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 7, GFLAGS),
> +	GATE(PCLK_PWM, "pclk_pwm", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 10,
> GFLAGS), +	GATE(PCLK_SPI, "pclk_spi", "pclk_peri", 0,
> RK2928_CLKGATE_CON(7), 12, GFLAGS), +	GATE(PCLK_WDT, "pclk_wdt",
> "pclk_peri", 0, RK2928_CLKGATE_CON(7), 15, GFLAGS), +	GATE(PCLK_UART0,
> "pclk_uart0", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 0, GFLAGS),
> +	GATE(PCLK_UART1, "pclk_uart1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 1,
> GFLAGS), +	GATE(PCLK_UART2, "pclk_uart2", "pclk_peri", 0,
> RK2928_CLKGATE_CON(8), 2, GFLAGS), +	GATE(PCLK_I2C0, "pclk_i2c0",
> "pclk_peri", 0, RK2928_CLKGATE_CON(8), 4, GFLAGS), +	GATE(PCLK_I2C1,
> "pclk_i2c1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 5, GFLAGS),
> +	GATE(PCLK_I2C2, "pclk_i2c2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 6,
> GFLAGS), +	GATE(PCLK_GPIO0, "pclk_gpio0", "pclk_peri", 0,
> RK2928_CLKGATE_CON(8), 9, GFLAGS), +	GATE(PCLK_GPIO1, "pclk_gpio1",
> "pclk_peri", 0, RK2928_CLKGATE_CON(8), 10, GFLAGS), +	GATE(PCLK_GPIO2,
> "pclk_gpio2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 11, GFLAGS), +};
> +
> +static const char *const rk3036_critical_clocks[] __initconst = {
> +	"aclk_cpu",
> +	"aclk_peri",
> +	"hclk_peri",
> +	"pclk_peri",
> +};
> +
> +static void __init rk3036_clk_init(struct device_node *np)
> +{
> +	void __iomem *reg_base;
> +	struct clk *clk;
> +
> +	reg_base = of_iomap(np, 0);
> +	if (!reg_base) {
> +		pr_err("%s: could not map cru region\n", __func__);
> +		return;
> +	}
> +
> +	rockchip_clk_init(np, reg_base, CLK_NR_CLKS);
> +
> +	/* xin12m is created by an cru-internal divider */
> +	clk = clk_register_fixed_factor(NULL, "xin12m", "xin24m", 0, 1, 2);
> +	if (IS_ERR(clk))
> +		pr_warn("%s: could not register clock xin12m: %ld\n",
> +			__func__, PTR_ERR(clk));
> +
> +	clk = clk_register_fixed_factor(NULL, "usb480m", "xin24m", 0, 20, 1);
> +	if (IS_ERR(clk))
> +		pr_warn("%s: could not register clock usb480m: %ld\n",
> +			__func__, PTR_ERR(clk));
> +
> +	clk = clk_register_fixed_factor(NULL, "ddrphy", "ddrphy2x", 0, 1, 2);
> +	if (IS_ERR(clk))
> +		pr_warn("%s: could not register clock ddrphy: %ld\n",
> +			__func__, PTR_ERR(clk));
> +
> +	clk = clk_register_fixed_factor(NULL, "hclk_vcodec_pre",
> +					"aclk_vcodec", 0, 1, 4);
> +	if (IS_ERR(clk))
> +		pr_warn("%s: could not register clock hclk_vcodec_pre: %ld\n",
> +			__func__, PTR_ERR(clk));
> +
> +	clk = clk_register_fixed_factor(NULL, "sclk_macref_out",
> +					"hclk_peri_src", 0, 1, 2);
> +	if (IS_ERR(clk))
> +		pr_warn("%s: could not register clock sclk_macref_out: %ld\n",
> +			__func__, PTR_ERR(clk));
> +
> +	rockchip_clk_register_plls(rk3036_pll_clks,
> +				   ARRAY_SIZE(rk3036_pll_clks),
> +				   -1);
> +	rockchip_clk_register_branches(rk3036_clk_branches,
> +				  ARRAY_SIZE(rk3036_clk_branches));
> +	rockchip_clk_protect_critical(rk3036_critical_clocks,
> +				      ARRAY_SIZE(rk3036_critical_clocks));
> +
> +	rockchip_clk_register_armclk(ARMCLK, "armclk",
> +			mux_armclk_p, ARRAY_SIZE(mux_armclk_p),
> +			&rk3036_cpuclk_data, rk3036_cpuclk_rates,
> +			ARRAY_SIZE(rk3036_cpuclk_rates));
> +
> +	rockchip_register_softrst(np, 9, reg_base + RK2928_SOFTRST_CON(0),
> +				  ROCKCHIP_SOFTRST_HIWORD_MASK);
> +
> +	rockchip_register_restart_notifier(RK2928_GLB_SRST_FST);
> +}
> +CLK_OF_DECLARE(rk3036_cru, "rockchip,rk3036-cru", rk3036_clk_init);
> diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h
> index dc8ecb2..6603c07 100644
> --- a/drivers/clk/rockchip/clk.h
> +++ b/drivers/clk/rockchip/clk.h
> @@ -2,6 +2,9 @@
>   * Copyright (c) 2014 MundoReader S.L.
>   * Author: Heiko Stuebner <heiko@sntech.de>
>   *
> + * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
> + * Author: Xing Zheng <zhengxing@rock-chips.com>
> + *
>   * based on
>   *
>   * samsung/clk.h
> @@ -40,6 +43,13 @@ struct clk;
>  #define RK2928_SOFTRST_CON(x)	((x) * 0x4 + 0x110)
>  #define RK2928_MISC_CON		0x134
> 
> +#define RK3036_SDMMC_CON0		0x144
> +#define RK3036_SDMMC_CON1		0x148
> +#define RK3036_SDIO_CON0		0x14c
> +#define RK3036_SDIO_CON1		0x150
> +#define RK3036_EMMC_CON0		0x154
> +#define RK3036_EMMC_CON1		0x158
> +
>  #define RK3288_PLL_CON(x)		RK2928_PLL_CON(x)
>  #define RK3288_MODE_CON			0x50
>  #define RK3288_CLKSEL_CON(x)		((x) * 0x4 + 0x60)
> @@ -75,6 +85,7 @@ struct clk;
> 
>  enum rockchip_pll_type {
>  	pll_rk3066,
> +	pll_rk3036,

this should be part of the addition of the pll type (your patch4, and should 
be reordered accordingly)

Also please all 3036 before the 3066 entry


>  };
> 
>  #define RK3066_PLL_RATE(_rate, _nr, _nf, _no)	\
> @@ -95,12 +106,31 @@ enum rockchip_pll_type {
>  	.nb = _nb,						\
>  }
> 
> +#define RK3036_PLL_RATE(_rate, _refdiv, _fbdiv, _postdiv1,	\
> +			_postdiv2, _dsmpd, _frac)		\
> +{								\
> +	.rate	= _rate##U,					\
> +	.fbdiv = _fbdiv,					\
> +	.postdiv1 = _postdiv1,					\
> +	.refdiv = _refdiv,					\
> +	.postdiv2 = _postdiv2,					\
> +	.dsmpd = _dsmpd,					\
> +	.frac = _frac,						\
> +}
> +
>  struct rockchip_pll_rate_table {
>  	unsigned long rate;
>  	unsigned int nr;
>  	unsigned int nf;
>  	unsigned int no;
>  	unsigned int nb;
> +	/* for RK3036 */
> +	unsigned int fbdiv;
> +	unsigned int postdiv1;
> +	unsigned int refdiv;
> +	unsigned int postdiv2;
> +	unsigned int dsmpd;
> +	unsigned int frac;

same for these 2 ... should be part of the pll addition itself

>  };
> 
>  /**
zhengxing Sept. 24, 2015, 3:04 a.m. UTC | #2
On 2015?09?17? 17:47, Heiko Stübner wrote:
> Hi,
>
> Am Donnerstag, 17. September 2015, 16:28:54 schrieb Xing Zheng:
>> Add the clock tree definition for the new rk3036 SoC.
>>
>> Signed-off-by: Xing Zheng<zhengxing@rock-chips.com>
> missing a dt-bindings document in a separate patch. See "dt-bindings: add
> documentation of rk3668 clock controller"
> (http://lists.infradead.org/pipermail/linux-rockchip/2015-July/003396.html)
> for comparison.
Yes, I sent a dt-bindings document in patch 5:
"dt-bindings: add documentation of rk3036 clock controller",
and I think I will adjust the order of document before "Add the clock 
tree..."
for rk3036.

>> ---
>>
>> Changes in v2: None
>>
>>   drivers/clk/rockchip/Makefile     |    1 +
>>   drivers/clk/rockchip/clk-rk3036.c |  504
>> +++++++++++++++++++++++++++++++++++++ drivers/clk/rockchip/clk.h        |
>> 30 +++
>>   3 files changed, 535 insertions(+)
>>   create mode 100644 drivers/clk/rockchip/clk-rk3036.c
>>
>> diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile
>> index b27edd6..d599829 100644
>> --- a/drivers/clk/rockchip/Makefile
>> +++ b/drivers/clk/rockchip/Makefile
>> @@ -10,6 +10,7 @@ obj-y	+= clk-inverter.o
>>   obj-y	+= clk-mmc-phase.o
>>   obj-$(CONFIG_RESET_CONTROLLER)	+= softrst.o
>>
>> +obj-y	+= clk-rk3036.o
>>   obj-y	+= clk-rk3188.o
>>   obj-y	+= clk-rk3288.o
>>   obj-y	+= clk-rk3368.o
>> diff --git a/drivers/clk/rockchip/clk-rk3036.c
>> b/drivers/clk/rockchip/clk-rk3036.c new file mode 100644
>> index 0000000..724d467
>> --- /dev/null
>> +++ b/drivers/clk/rockchip/clk-rk3036.c
>> @@ -0,0 +1,504 @@
>> +/*
>> + * Copyright (c) 2014 MundoReader S.L.
>> + * Author: Heiko Stuebner<heiko@sntech.de>
>> + *
>> + * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
>> + * Author: Xing Zheng<zhengxing@rock-chips.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include<linux/clk-provider.h>
>> +#include<linux/of.h>
>> +#include<linux/of_address.h>
>> +#include<linux/syscore_ops.h>
>> +#include<dt-bindings/clock/rk3036-cru.h>
>> +#include "clk.h"
>> +
>> +enum rk3036_plls {
>> +	apll, dpll, gpll,
>> +};
>> +
>> +static struct rockchip_pll_rate_table rk3036_pll_rates[] = {
>> +	/* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */
>> +	RK3036_PLL_RATE(1608000000, 1, 67, 1, 1, 1, 0),
>> +	RK3036_PLL_RATE(1584000000, 1, 66, 1, 1, 1, 0),
>> +	RK3036_PLL_RATE(1560000000, 1, 65, 1, 1, 1, 0),
>> +	RK3036_PLL_RATE(1536000000, 1, 64, 1, 1, 1, 0),
>> +	RK3036_PLL_RATE(1512000000, 1, 63, 1, 1, 1, 0),
>> +	RK3036_PLL_RATE(1488000000, 1, 62, 1, 1, 1, 0),
>> +	RK3036_PLL_RATE(1464000000, 1, 61, 1, 1, 1, 0),
>> +	RK3036_PLL_RATE(1440000000, 1, 60, 1, 1, 1, 0),
>> +	RK3036_PLL_RATE(1416000000, 1, 59, 1, 1, 1, 0),
>> +	RK3036_PLL_RATE(1392000000, 1, 58, 1, 1, 1, 0),
>> +	RK3036_PLL_RATE(1368000000, 1, 57, 1, 1, 1, 0),
>> +	RK3036_PLL_RATE(1344000000, 1, 56, 1, 1, 1, 0),
>> +	RK3036_PLL_RATE(1320000000, 1, 55, 1, 1, 1, 0),
>> +	RK3036_PLL_RATE(1296000000, 1, 54, 1, 1, 1, 0),
>> +	RK3036_PLL_RATE(1272000000, 1, 53, 1, 1, 1, 0),
>> +	RK3036_PLL_RATE(1248000000, 1, 52, 1, 1, 1, 0),
>> +	RK3036_PLL_RATE(1200000000, 1, 50, 1, 1, 1, 0),
>> +	RK3036_PLL_RATE(1188000000, 2, 99, 1, 1, 1, 0),
>> +	RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0),
>> +	RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0),
>> +	RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0),
>> +	RK3036_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0),
>> +	RK3036_PLL_RATE( 984000000, 1, 82, 2, 1, 1, 0),
>> +	RK3036_PLL_RATE( 960000000, 1, 80, 2, 1, 1, 0),
>> +	RK3036_PLL_RATE( 936000000, 1, 78, 2, 1, 1, 0),
>> +	RK3036_PLL_RATE( 912000000, 1, 76, 2, 1, 1, 0),
>> +	RK3036_PLL_RATE( 900000000, 4, 300, 2, 1, 1, 0),
>> +	RK3036_PLL_RATE( 888000000, 1, 74, 2, 1, 1, 0),
>> +	RK3036_PLL_RATE( 864000000, 1, 72, 2, 1, 1, 0),
>> +	RK3036_PLL_RATE( 840000000, 1, 70, 2, 1, 1, 0),
>> +	RK3036_PLL_RATE( 816000000, 1, 68, 2, 1, 1, 0),
>> +	RK3036_PLL_RATE( 800000000, 6, 400, 2, 1, 1, 0),
>> +	RK3036_PLL_RATE( 700000000, 6, 350, 2, 1, 1, 0),
>> +	RK3036_PLL_RATE( 696000000, 1, 58, 2, 1, 1, 0),
>> +	RK3036_PLL_RATE( 600000000, 1, 75, 3, 1, 1, 0),
>> +	RK3036_PLL_RATE( 594000000, 2, 99, 2, 1, 1, 0),
>> +	RK3036_PLL_RATE( 504000000, 1, 63, 3, 1, 1, 0),
>> +	RK3036_PLL_RATE( 500000000, 6, 250, 2, 1, 1, 0),
>> +	RK3036_PLL_RATE( 408000000, 1, 68, 2, 2, 1, 0),
>> +	RK3036_PLL_RATE( 312000000, 1, 52, 2, 2, 1, 0),
>> +	RK3036_PLL_RATE( 216000000, 1, 72, 4, 2, 1, 0),
>> +	RK3036_PLL_RATE(  96000000, 1, 64, 4, 4, 1, 0),
>> +	RK3036_PLL_RATE(0, 1, 0, 1, 1, 1, 0),
> you shouldn't need a "0" rate entry I guess
Done.
>> +	{ /* sentinel */ },
>> +};
>> +
>> +#define RK3036_DIV_CPU_MASK		0x1f
>> +#define RK3036_DIV_CPU_SHIFT		8
>> +
>> +#define RK3036_DIV_PERI_MASK		0xf
>> +#define RK3036_DIV_PERI_SHIFT		0
>> +#define RK3036_DIV_ACLK_MASK		0x7
>> +#define RK3036_DIV_ACLK_SHIFT		4
>> +#define RK3036_DIV_HCLK_MASK		0x3
>> +#define RK3036_DIV_HCLK_SHIFT		8
>> +#define RK3036_DIV_PCLK_MASK		0x7
>> +#define RK3036_DIV_PCLK_SHIFT		12
>> +
>> +#define RK3036_CLKSEL1(_core_periph_div)					\
>> +	{									\
>> +		.reg = RK2928_CLKSEL_CON(1),					\
>> +		.val = HIWORD_UPDATE(_core_periph_div, RK3036_DIV_PERI_MASK,	\
>> +				RK3036_DIV_PERI_SHIFT)				\
>> +	}
>> +
>> +#define RK3036_CPUCLK_RATE(_prate, _core_periph_div)			\
>> +	{								\
>> +		.prate = _prate,					\
>> +		.divs = {						\
>> +			RK3036_CLKSEL1(_core_periph_div),		\
>> +		},							\
>> +	}
>> +
>> +static struct rockchip_cpuclk_rate_table rk3036_cpuclk_rates[] __initdata =
>> { +	RK3036_CPUCLK_RATE(816000000, 4),
>> +	RK3036_CPUCLK_RATE(600000000, 4),
>> +	RK3036_CPUCLK_RATE(312000000, 4),
>> +};
>> +
>> +static const struct rockchip_cpuclk_reg_data rk3036_cpuclk_data = {
>> +	.core_reg = RK2928_CLKSEL_CON(0),
>> +	.div_core_shift = 0,
>> +	.div_core_mask = 0x1f,
>> +	.mux_core_shift = 7,
>> +};
>> +
>> +PNAME(mux_pll_p)		= { "xin24m", "xin24m" };
> looks like you overlooked the divider? Like
>
> DIV(0, "xin24m_plldiv", "xin24m", 0,
> 		RK2928_CLKSEL_CON(4), 8, 5, DFLAGS),
>
> PNAME(mux_pll_p)		= { "xin24m_plldiv", "xin24m" };
Did I? There are not xin24m_plldiv and CRU_CLKSEL_CON4 register in my 
rk3036 TRM...
>> +
>> +PNAME(mux_armclk_p)		= { "apll", "gpll_armclk" };
>> +PNAME(mux_busclk_p)		= { "apll", "dpll_cpu", "gpll_cpu" };
> [...]
>
>> +	/*
>> +	 * Clock-Architecture Diagram 3
>> +	 */
>> +
>> +	/* aclk_cpu gates */
>> +	GATE(0, "sclk_intmem", "aclk_cpu", CLK_IGNORE_UNUSED,
>> RK2928_CLKGATE_CON(4), 12, GFLAGS), +	GATE(0, "aclk_strc_sys", "aclk_cpu",
>> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 10, GFLAGS), +
>> +	/* hclk_cpu gates */
>> +	GATE(HCLK_ROM, "hclk_rom", "hclk_cpu", CLK_IGNORE_UNUSED,
>> RK2928_CLKGATE_CON(5), 6, GFLAGS), +
>> +	/* pclk_cpu gates */
>> +	GATE(PCLK_GRF, "pclk_grf", "pclk_cpu", CLK_IGNORE_UNUSED,
>> RK2928_CLKGATE_CON(5), 4, GFLAGS), +	GATE(PCLK_DDRUPCTL, "pclk_ddrupctl",
>> "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 7, GFLAGS), +	GATE(ACLK_VCODEC,
>> "pclk_acodec", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 14, GFLAGS),
>> +	GATE(PCLK_HDMI, "pclk_hdmi", "pclk_cpu", 0, RK2928_CLKGATE_CON(3), 8,
>> GFLAGS), +
>> +	/* aclk_vio gates */
>> +	GATE(ACLK_VIO, "aclk_vio", "aclk_disp1_pre", 0,
>> +			RK2928_CLKGATE_CON(6), 13, GFLAGS),
>> +	GATE(ACLK_LCDC, "aclk_lcdc", "aclk_disp1_pre", 0,
>> +			RK2928_CLKGATE_CON(9), 6, GFLAGS),
>> +
>> +	GATE(HCLK_VIO_BUS, "hclk_vio_bus", "hclk_disp_pre", 0,
>> +			RK2928_CLKGATE_CON(6), 12, GFLAGS),
>> +	GATE(HCLK_LCDC, "hclk_lcdc", "hclk_disp_pre", 0,
>> +			RK2928_CLKGATE_CON(9), 5, GFLAGS),
>> +
>> +	/* aclk_video gates */
>> +	GATE(HCLK_LCDC, "hclk_vcodec", "hclk_disp_pre", 0,
>> +			RK2928_CLKGATE_CON(3), 12, GFLAGS),
> in big gate-block from diagram 3, please stick to the one-line format, like
> the rest of the gates here (diagram3 only)
Done.
>> +
>> +	/* xin24m gates */
>> +	GATE(SCLK_PVTM_CORE, "sclk_pvtm_core", "xin24m", 0,
>> RK2928_CLKGATE_CON(10), 0, GFLAGS), +	GATE(SCLK_PVTM_GPU, "sclk_pvtm_gpu",
>> "xin24m", 0, RK2928_CLKGATE_CON(10), 1, GFLAGS), +
>> +	/* aclk_peri gates */
>> +	GATE(0, "aclk_peri_axi_matrix", "aclk_peri", CLK_IGNORE_UNUSED,
>> RK2928_CLKGATE_CON(4), 3, GFLAGS), +	GATE(0, "aclk_cpu_peri", "aclk_peri",
>> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 2, GFLAGS), +	GATE(ACLK_DMAC2,
>> "aclk_dmac2", "aclk_peri", 0, RK2928_CLKGATE_CON(5), 1, GFLAGS), +	GATE(0,
>> "aclk_peri_niu", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 15,
>> GFLAGS), +
>> +	/* hclk_peri gates */
>> +	GATE(0, "hclk_peri_matrix", "hclk_peri", CLK_IGNORE_UNUSED,
>> RK2928_CLKGATE_CON(4), 0, GFLAGS), +	GATE(0, "hclk_usb_peri", "hclk_peri",
>> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 13, GFLAGS), +	GATE(0,
>> "hclk_peri_arbi", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9),
>> 14, GFLAGS), +	GATE(HCLK_NANDC, "hclk_nandc", "hclk_peri", 0,
>> RK2928_CLKGATE_CON(5), 9, GFLAGS), +	GATE(HCLK_SDMMC, "hclk_sdmmc",
>> "hclk_peri", 0, RK2928_CLKGATE_CON(5), 10, GFLAGS), +	GATE(HCLK_SDIO,
>> "hclk_sdio", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 11, GFLAGS),
>> +	GATE(HCLK_EMMC, "hclk_emmc", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 0,
>> GFLAGS), +	GATE(HCLK_OTG0, "hclk_otg0", "hclk_peri", CLK_IGNORE_UNUSED,
>> RK2928_CLKGATE_CON(5), 13, GFLAGS), +	GATE(HCLK_OTG1, "hclk_otg1",
>> "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(7), 13, GFLAGS),
>> +	GATE(HCLK_I2S, "hclk_i2s", "hclk_peri", CLK_IGNORE_UNUSED,
>> RK2928_CLKGATE_CON(7), 2, GFLAGS), +	GATE(0, "hclk_sfc", "hclk_peri",
>> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 14, GFLAGS), +	GATE(0,
>> "hclk_mac", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 15,
>> GFLAGS), +
>> +	/* pclk_peri gates */
>> +	GATE(0, "pclk_peri_matrix", "pclk_peri", CLK_IGNORE_UNUSED,
>> RK2928_CLKGATE_CON(4), 1, GFLAGS), +	GATE(0, "pclk_efuse", "pclk_peri",
>> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 2, GFLAGS), +	GATE(PCLK_TIMER,
>> "pclk_timer0", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 7, GFLAGS),
>> +	GATE(PCLK_PWM, "pclk_pwm", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 10,
>> GFLAGS), +	GATE(PCLK_SPI, "pclk_spi", "pclk_peri", 0,
>> RK2928_CLKGATE_CON(7), 12, GFLAGS), +	GATE(PCLK_WDT, "pclk_wdt",
>> "pclk_peri", 0, RK2928_CLKGATE_CON(7), 15, GFLAGS), +	GATE(PCLK_UART0,
>> "pclk_uart0", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 0, GFLAGS),
>> +	GATE(PCLK_UART1, "pclk_uart1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 1,
>> GFLAGS), +	GATE(PCLK_UART2, "pclk_uart2", "pclk_peri", 0,
>> RK2928_CLKGATE_CON(8), 2, GFLAGS), +	GATE(PCLK_I2C0, "pclk_i2c0",
>> "pclk_peri", 0, RK2928_CLKGATE_CON(8), 4, GFLAGS), +	GATE(PCLK_I2C1,
>> "pclk_i2c1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 5, GFLAGS),
>> +	GATE(PCLK_I2C2, "pclk_i2c2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 6,
>> GFLAGS), +	GATE(PCLK_GPIO0, "pclk_gpio0", "pclk_peri", 0,
>> RK2928_CLKGATE_CON(8), 9, GFLAGS), +	GATE(PCLK_GPIO1, "pclk_gpio1",
>> "pclk_peri", 0, RK2928_CLKGATE_CON(8), 10, GFLAGS), +	GATE(PCLK_GPIO2,
>> "pclk_gpio2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 11, GFLAGS), +};
>> +
>> +static const char *const rk3036_critical_clocks[] __initconst = {
>> +	"aclk_cpu",
>> +	"aclk_peri",
>> +	"hclk_peri",
>> +	"pclk_peri",
>> +};
>> +
>> +static void __init rk3036_clk_init(struct device_node *np)
>> +{
>> +	void __iomem *reg_base;
>> +	struct clk *clk;
>> +
>> +	reg_base = of_iomap(np, 0);
>> +	if (!reg_base) {
>> +		pr_err("%s: could not map cru region\n", __func__);
>> +		return;
>> +	}
>> +
>> +	rockchip_clk_init(np, reg_base, CLK_NR_CLKS);
>> +
>> +	/* xin12m is created by an cru-internal divider */
>> +	clk = clk_register_fixed_factor(NULL, "xin12m", "xin24m", 0, 1, 2);
>> +	if (IS_ERR(clk))
>> +		pr_warn("%s: could not register clock xin12m: %ld\n",
>> +			__func__, PTR_ERR(clk));
>> +
>> +	clk = clk_register_fixed_factor(NULL, "usb480m", "xin24m", 0, 20, 1);
>> +	if (IS_ERR(clk))
>> +		pr_warn("%s: could not register clock usb480m: %ld\n",
>> +			__func__, PTR_ERR(clk));
>> +
>> +	clk = clk_register_fixed_factor(NULL, "ddrphy", "ddrphy2x", 0, 1, 2);
>> +	if (IS_ERR(clk))
>> +		pr_warn("%s: could not register clock ddrphy: %ld\n",
>> +			__func__, PTR_ERR(clk));
>> +
>> +	clk = clk_register_fixed_factor(NULL, "hclk_vcodec_pre",
>> +					"aclk_vcodec", 0, 1, 4);
>> +	if (IS_ERR(clk))
>> +		pr_warn("%s: could not register clock hclk_vcodec_pre: %ld\n",
>> +			__func__, PTR_ERR(clk));
>> +
>> +	clk = clk_register_fixed_factor(NULL, "sclk_macref_out",
>> +					"hclk_peri_src", 0, 1, 2);
>> +	if (IS_ERR(clk))
>> +		pr_warn("%s: could not register clock sclk_macref_out: %ld\n",
>> +			__func__, PTR_ERR(clk));
>> +
>> +	rockchip_clk_register_plls(rk3036_pll_clks,
>> +				   ARRAY_SIZE(rk3036_pll_clks),
>> +				   -1);
>> +	rockchip_clk_register_branches(rk3036_clk_branches,
>> +				  ARRAY_SIZE(rk3036_clk_branches));
>> +	rockchip_clk_protect_critical(rk3036_critical_clocks,
>> +				      ARRAY_SIZE(rk3036_critical_clocks));
>> +
>> +	rockchip_clk_register_armclk(ARMCLK, "armclk",
>> +			mux_armclk_p, ARRAY_SIZE(mux_armclk_p),
>> +			&rk3036_cpuclk_data, rk3036_cpuclk_rates,
>> +			ARRAY_SIZE(rk3036_cpuclk_rates));
>> +
>> +	rockchip_register_softrst(np, 9, reg_base + RK2928_SOFTRST_CON(0),
>> +				  ROCKCHIP_SOFTRST_HIWORD_MASK);
>> +
>> +	rockchip_register_restart_notifier(RK2928_GLB_SRST_FST);
>> +}
>> +CLK_OF_DECLARE(rk3036_cru, "rockchip,rk3036-cru", rk3036_clk_init);
>> diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h
>> index dc8ecb2..6603c07 100644
>> --- a/drivers/clk/rockchip/clk.h
>> +++ b/drivers/clk/rockchip/clk.h
>> @@ -2,6 +2,9 @@
>>    * Copyright (c) 2014 MundoReader S.L.
>>    * Author: Heiko Stuebner<heiko@sntech.de>
>>    *
>> + * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
>> + * Author: Xing Zheng<zhengxing@rock-chips.com>
>> + *
>>    * based on
>>    *
>>    * samsung/clk.h
>> @@ -40,6 +43,13 @@ struct clk;
>>   #define RK2928_SOFTRST_CON(x)	((x) * 0x4 + 0x110)
>>   #define RK2928_MISC_CON		0x134
>>
>> +#define RK3036_SDMMC_CON0		0x144
>> +#define RK3036_SDMMC_CON1		0x148
>> +#define RK3036_SDIO_CON0		0x14c
>> +#define RK3036_SDIO_CON1		0x150
>> +#define RK3036_EMMC_CON0		0x154
>> +#define RK3036_EMMC_CON1		0x158
>> +
>>   #define RK3288_PLL_CON(x)		RK2928_PLL_CON(x)
>>   #define RK3288_MODE_CON			0x50
>>   #define RK3288_CLKSEL_CON(x)		((x) * 0x4 + 0x60)
>> @@ -75,6 +85,7 @@ struct clk;
>>
>>   enum rockchip_pll_type {
>>   	pll_rk3066,
>> +	pll_rk3036,
> this should be part of the addition of the pll type (your patch4, and should
> be reordered accordingly)
>
> Also please all 3036 before the 3066 entry
OK, done.
>>   };
>>
>>   #define RK3066_PLL_RATE(_rate, _nr, _nf, _no)	\
>> @@ -95,12 +106,31 @@ enum rockchip_pll_type {
>>   	.nb = _nb,						\
>>   }
>>
>> +#define RK3036_PLL_RATE(_rate, _refdiv, _fbdiv, _postdiv1,	\
>> +			_postdiv2, _dsmpd, _frac)		\
>> +{								\
>> +	.rate	= _rate##U,					\
>> +	.fbdiv = _fbdiv,					\
>> +	.postdiv1 = _postdiv1,					\
>> +	.refdiv = _refdiv,					\
>> +	.postdiv2 = _postdiv2,					\
>> +	.dsmpd = _dsmpd,					\
>> +	.frac = _frac,						\
>> +}
>> +
>>   struct rockchip_pll_rate_table {
>>   	unsigned long rate;
>>   	unsigned int nr;
>>   	unsigned int nf;
>>   	unsigned int no;
>>   	unsigned int nb;
>> +	/* for RK3036 */
>> +	unsigned int fbdiv;
>> +	unsigned int postdiv1;
>> +	unsigned int refdiv;
>> +	unsigned int postdiv2;
>> +	unsigned int dsmpd;
>> +	unsigned int frac;
> same for these 2 ... should be part of the pll addition itself
Done.
>
>>   };
>>
>>   /**
Thanks.
zhengxing Sept. 24, 2015, 3:31 a.m. UTC | #3
On 2015?09?24? 11:04, Xing Zheng wrote:
>>>
>>>   #define RK3066_PLL_RATE(_rate, _nr, _nf, _no)    \
>>> @@ -95,12 +106,31 @@ enum rockchip_pll_type {
>>>       .nb = _nb,                        \
>>>   }
>>>
>>> +#define RK3036_PLL_RATE(_rate, _refdiv, _fbdiv, _postdiv1,    \
>>> +            _postdiv2, _dsmpd, _frac)        \
>>> +{                                \
>>> +    .rate    = _rate##U,                    \
>>> +    .fbdiv = _fbdiv,                    \
>>> +    .postdiv1 = _postdiv1,                    \
>>> +    .refdiv = _refdiv,                    \
>>> +    .postdiv2 = _postdiv2,                    \
>>> +    .dsmpd = _dsmpd,                    \
>>> +    .frac = _frac,                        \
>>> +}
>>> +
>>>   struct rockchip_pll_rate_table {
>>>       unsigned long rate;
>>>       unsigned int nr;
>>>       unsigned int nf;
>>>       unsigned int no;
>>>       unsigned int nb;
>>> +    /* for RK3036 */
>>> +    unsigned int fbdiv;
>>> +    unsigned int postdiv1;
>>> +    unsigned int refdiv;
>>> +    unsigned int postdiv2;
>>> +    unsigned int dsmpd;
>>> +    unsigned int frac;
>> same for these 2 ... should be part of the pll addition itself
>   };
> Done.
>
Sorry, I have one question:
The "struct rockchip_pll_rate_table" is called in "rockchip/clk-pll.c" 
on many functions, I think I could add a struct like:
struct rk3036_pll_rate_table {
     unsigned int fbdiv;
     unsigned int postdiv1;
     unsigned int refdiv;
     unsigned int postdiv2;
     unsigned int dsmpd;
     unsigned int frac;
};
but, it will add many redundancy codes in "rockchip/clk-pll.c" just for 
call "struct rk3036_pll_rate_table".

Thanks.
Heiko Stübner Oct. 7, 2015, 10:24 a.m. UTC | #4
Hi,

Am Donnerstag, 24. September 2015, 11:31:58 schrieb Xing Zheng:
> On 2015?09?24? 11:04, Xing Zheng wrote:
> >>>   #define RK3066_PLL_RATE(_rate, _nr, _nf, _no)    \
> >>> 
> >>> @@ -95,12 +106,31 @@ enum rockchip_pll_type {
> >>> 
> >>>       .nb = _nb,                        \
> >>>   
> >>>   }
> >>> 
> >>> +#define RK3036_PLL_RATE(_rate, _refdiv, _fbdiv, _postdiv1,    \
> >>> +            _postdiv2, _dsmpd, _frac)        \
> >>> +{                                \
> >>> +    .rate    = _rate##U,                    \
> >>> +    .fbdiv = _fbdiv,                    \
> >>> +    .postdiv1 = _postdiv1,                    \
> >>> +    .refdiv = _refdiv,                    \
> >>> +    .postdiv2 = _postdiv2,                    \
> >>> +    .dsmpd = _dsmpd,                    \
> >>> +    .frac = _frac,                        \
> >>> +}
> >>> +
> >>> 
> >>>   struct rockchip_pll_rate_table {
> >>>   
> >>>       unsigned long rate;
> >>>       unsigned int nr;
> >>>       unsigned int nf;
> >>>       unsigned int no;
> >>>       unsigned int nb;
> >>> 
> >>> +    /* for RK3036 */
> >>> +    unsigned int fbdiv;
> >>> +    unsigned int postdiv1;
> >>> +    unsigned int refdiv;
> >>> +    unsigned int postdiv2;
> >>> +    unsigned int dsmpd;
> >>> +    unsigned int frac;
> >> 
> >> same for these 2 ... should be part of the pll addition itself
> >> 
> >   };
> > 
> > Done.
> 
> Sorry, I have one question:
> The "struct rockchip_pll_rate_table" is called in "rockchip/clk-pll.c"
> on many functions, I think I could add a struct like:
> struct rk3036_pll_rate_table {
>      unsigned int fbdiv;
>      unsigned int postdiv1;
>      unsigned int refdiv;
>      unsigned int postdiv2;
>      unsigned int dsmpd;
>      unsigned int frac;
> };
> but, it will add many redundancy codes in "rockchip/clk-pll.c" just for
> call "struct rk3036_pll_rate_table".


One possible solution may be to cast to void* in the general functions, so 
have sturct rk3066_pll_rate_table, rk3036_pll_rate_table, have 
rockchip_clk_register_pll and friends handle it as void* and then only have 
the rockchip_rk3066_pll_* functions as well as the clk-rkxxxx.c use them as 
their actual type, as they know which they need.


Heiko
diff mbox

Patch

diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile
index b27edd6..d599829 100644
--- a/drivers/clk/rockchip/Makefile
+++ b/drivers/clk/rockchip/Makefile
@@ -10,6 +10,7 @@  obj-y	+= clk-inverter.o
 obj-y	+= clk-mmc-phase.o
 obj-$(CONFIG_RESET_CONTROLLER)	+= softrst.o
 
+obj-y	+= clk-rk3036.o
 obj-y	+= clk-rk3188.o
 obj-y	+= clk-rk3288.o
 obj-y	+= clk-rk3368.o
diff --git a/drivers/clk/rockchip/clk-rk3036.c b/drivers/clk/rockchip/clk-rk3036.c
new file mode 100644
index 0000000..724d467
--- /dev/null
+++ b/drivers/clk/rockchip/clk-rk3036.c
@@ -0,0 +1,504 @@ 
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
+ * Author: Xing Zheng <zhengxing@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+#include <dt-bindings/clock/rk3036-cru.h>
+#include "clk.h"
+
+enum rk3036_plls {
+	apll, dpll, gpll,
+};
+
+static struct rockchip_pll_rate_table rk3036_pll_rates[] = {
+	/* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */
+	RK3036_PLL_RATE(1608000000, 1, 67, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1584000000, 1, 66, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1560000000, 1, 65, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1536000000, 1, 64, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1512000000, 1, 63, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1488000000, 1, 62, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1464000000, 1, 61, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1440000000, 1, 60, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1416000000, 1, 59, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1392000000, 1, 58, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1368000000, 1, 57, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1344000000, 1, 56, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1320000000, 1, 55, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1296000000, 1, 54, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1272000000, 1, 53, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1248000000, 1, 52, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1200000000, 1, 50, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1188000000, 2, 99, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0),
+	RK3036_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 984000000, 1, 82, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 960000000, 1, 80, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 936000000, 1, 78, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 912000000, 1, 76, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 900000000, 4, 300, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 888000000, 1, 74, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 864000000, 1, 72, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 840000000, 1, 70, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 816000000, 1, 68, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 800000000, 6, 400, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 700000000, 6, 350, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 696000000, 1, 58, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 600000000, 1, 75, 3, 1, 1, 0),
+	RK3036_PLL_RATE( 594000000, 2, 99, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 504000000, 1, 63, 3, 1, 1, 0),
+	RK3036_PLL_RATE( 500000000, 6, 250, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 408000000, 1, 68, 2, 2, 1, 0),
+	RK3036_PLL_RATE( 312000000, 1, 52, 2, 2, 1, 0),
+	RK3036_PLL_RATE( 216000000, 1, 72, 4, 2, 1, 0),
+	RK3036_PLL_RATE(  96000000, 1, 64, 4, 4, 1, 0),
+	RK3036_PLL_RATE(0, 1, 0, 1, 1, 1, 0),
+	{ /* sentinel */ },
+};
+
+#define RK3036_DIV_CPU_MASK		0x1f
+#define RK3036_DIV_CPU_SHIFT		8
+
+#define RK3036_DIV_PERI_MASK		0xf
+#define RK3036_DIV_PERI_SHIFT		0
+#define RK3036_DIV_ACLK_MASK		0x7
+#define RK3036_DIV_ACLK_SHIFT		4
+#define RK3036_DIV_HCLK_MASK		0x3
+#define RK3036_DIV_HCLK_SHIFT		8
+#define RK3036_DIV_PCLK_MASK		0x7
+#define RK3036_DIV_PCLK_SHIFT		12
+
+#define RK3036_CLKSEL1(_core_periph_div)					\
+	{									\
+		.reg = RK2928_CLKSEL_CON(1),					\
+		.val = HIWORD_UPDATE(_core_periph_div, RK3036_DIV_PERI_MASK,	\
+				RK3036_DIV_PERI_SHIFT)				\
+	}
+
+#define RK3036_CPUCLK_RATE(_prate, _core_periph_div)			\
+	{								\
+		.prate = _prate,					\
+		.divs = {						\
+			RK3036_CLKSEL1(_core_periph_div),		\
+		},							\
+	}
+
+static struct rockchip_cpuclk_rate_table rk3036_cpuclk_rates[] __initdata = {
+	RK3036_CPUCLK_RATE(816000000, 4),
+	RK3036_CPUCLK_RATE(600000000, 4),
+	RK3036_CPUCLK_RATE(312000000, 4),
+};
+
+static const struct rockchip_cpuclk_reg_data rk3036_cpuclk_data = {
+	.core_reg = RK2928_CLKSEL_CON(0),
+	.div_core_shift = 0,
+	.div_core_mask = 0x1f,
+	.mux_core_shift = 7,
+};
+
+PNAME(mux_pll_p)		= { "xin24m", "xin24m" };
+
+PNAME(mux_armclk_p)		= { "apll", "gpll_armclk" };
+PNAME(mux_busclk_p)		= { "apll", "dpll_cpu", "gpll_cpu" };
+PNAME(mux_ddrphy_p)		= { "dpll_ddr", "gpll_ddr" };
+PNAME(mux_pll_src_3plls_p)	= { "apll", "dpll", "gpll" };
+PNAME(mux_timer_p)		= { "xin24m", "pclk_peri_src" };
+
+PNAME(mux_pll_src_apll_gpll_dpll_usb480m_p)	= { "apll", "gpll", "dpll" "usb480m" };
+
+PNAME(mux_mmc_src_p)	= { "apll", "gpll", "dpll", "xin24m" };
+PNAME(mux_i2s_pre_p)	= { "i2s_src", "i2s_frac", "ext_i2s", "xin12m" };
+PNAME(mux_i2s_clkout_p)	= { "i2s_pre", "xin12m" };
+PNAME(mux_spdif_p)	= { "spdif_src", "spdif_frac", "xin12m" };
+PNAME(mux_uart0_p)	= { "uart0_src", "uart0_frac", "xin24m" };
+PNAME(mux_uart1_p)	= { "uart1_src", "uart1_frac", "xin24m" };
+PNAME(mux_uart2_p)	= { "uart2_src", "uart2_frac", "xin24m" };
+PNAME(mux_mac_p)	= { "mac_pll_src", "ext_gmac" };
+PNAME(mux_dclk_p)	= { "dclk_lcdc", "dclk_hdmi_src" };
+
+static struct rockchip_pll_clock rk3036_pll_clks[] __initdata = {
+	[apll] = PLL(pll_rk3036, PLL_APLL, "apll", mux_pll_p, 0, RK2928_PLL_CON(0),
+		     RK2928_MODE_CON, 0, 10, 0, rk3036_pll_rates),
+	[dpll] = PLL(pll_rk3036, PLL_DPLL, "dpll", mux_pll_p, 0, RK2928_PLL_CON(4),
+		     RK2928_MODE_CON, 4, 10, 0, NULL),
+	[gpll] = PLL(pll_rk3036, PLL_GPLL, "gpll", mux_pll_p, 0, RK2928_PLL_CON(12),
+		     RK2928_MODE_CON, 12, 10, ROCKCHIP_PLL_SYNC_RATE, rk3036_pll_rates),
+};
+
+#define MFLAGS CLK_MUX_HIWORD_MASK
+#define DFLAGS CLK_DIVIDER_HIWORD_MASK
+#define GFLAGS (CLK_GATE_HIWORD_MASK | CLK_GATE_SET_TO_DISABLE)
+
+static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
+	/*
+	 * Clock-Architecture Diagram 1
+	 */
+
+	/* PD_CORE */
+	GATE(0, "gpll_armclk", "gpll", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 6, GFLAGS),
+
+	/*
+	 * Clock-Architecture Diagram 2
+	 */
+
+	/* PD_DDR */
+	GATE(0, "dpll_ddr", "dpll", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 2, GFLAGS),
+	GATE(0, "gpll_ddr", "gpll", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 8, GFLAGS),
+	COMPOSITE_NOGATE(0, "ddrphy2x", mux_ddrphy_p, CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(26), 8, 1, MFLAGS, 0, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
+
+	/* PD_CORE */
+	COMPOSITE_NOMUX(0, "pclk_dbg", "armclk", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(1), 0, 4, DFLAGS | CLK_DIVIDER_READ_ONLY,
+			RK2928_CLKGATE_CON(0), 7, GFLAGS),
+	COMPOSITE_NOMUX(0, "aclk_core_pre", "armclk", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(1), 4, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
+			RK2928_CLKGATE_CON(0), 7, GFLAGS),
+
+	/* PD_CPU (BUS) */
+	GATE(0, "dpll_cpu", "dpll", 0, RK2928_CLKGATE_CON(10), 8, GFLAGS),
+	GATE(0, "gpll_cpu", "gpll", 0, RK2928_CLKGATE_CON(0), 1, GFLAGS),
+	COMPOSITE_NOGATE(0, "aclk_cpu_src", mux_busclk_p, 0,
+			RK2928_CLKSEL_CON(0), 14, 2, MFLAGS, 8, 5, DFLAGS),
+	GATE(ACLK_CPU, "aclk_cpu", "aclk_cpu_src", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 3, GFLAGS),
+	COMPOSITE_NOMUX(PCLK_CPU, "pclk_cpu", "aclk_cpu_src", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(1), 12, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
+			RK2928_CLKGATE_CON(0), 5, GFLAGS),
+	COMPOSITE_NOMUX(HCLK_CPU, "hclk_cpu", "aclk_cpu_src", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(1), 8, 2, DFLAGS | CLK_DIVIDER_READ_ONLY,
+			RK2928_CLKGATE_CON(0), 4, GFLAGS),
+
+	/* PD_PERI */
+	COMPOSITE(0, "aclk_peri_src", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(10), 14, 2, MFLAGS, 0, 5, DFLAGS,
+			RK2928_CLKGATE_CON(2), 0, GFLAGS),
+
+	GATE(ACLK_PERI, "aclk_peri", "aclk_peri_src", 0,
+			RK2928_CLKGATE_CON(2), 1, GFLAGS),
+	/* pclk_peri_src is soure for timers */
+	DIV(0, "pclk_peri_src", "aclk_peri_src", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(10), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
+	GATE(PCLK_PERI, "pclk_peri", "pclk_peri_src", 0,
+			RK2928_CLKGATE_CON(2), 3, GFLAGS),
+	/* hclk_peri_src is soure for sclk_macref_out */
+	DIV(0, "hclk_peri_src", "aclk_peri_src", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(10), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
+	GATE(HCLK_PERI, "hclk_peri", "hclk_peri_src", 0,
+			RK2928_CLKGATE_CON(2), 2, GFLAGS),
+
+	/* PD_TIMER */
+	COMPOSITE_NODIV(SCLK_TIMER0, "sclk_timer0", mux_timer_p, CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(2), 4, 1, DFLAGS,
+			RK2928_CLKGATE_CON(1), 0, GFLAGS),
+	COMPOSITE_NODIV(SCLK_TIMER1, "sclk_timer1", mux_timer_p, CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(2), 5, 1, DFLAGS,
+			RK2928_CLKGATE_CON(1), 1, GFLAGS),
+	COMPOSITE_NODIV(SCLK_TIMER2, "sclk_timer2", mux_timer_p, CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(2), 6, 1, DFLAGS,
+			RK2928_CLKGATE_CON(2), 4, GFLAGS),
+	COMPOSITE_NODIV(SCLK_TIMER3, "sclk_timer3", mux_timer_p, CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(2), 7, 1, DFLAGS,
+			RK2928_CLKGATE_CON(2), 5, GFLAGS),
+
+	/* PD_UART */
+	MUX(0, "uart_pll_clk", mux_pll_src_apll_gpll_dpll_usb480m_p, 0,
+			RK2928_CLKSEL_CON(13), 10, 2, MFLAGS),
+	COMPOSITE_NOMUX(0, "uart0_src", "uart_pll_clk", 0,
+			RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(1), 8, GFLAGS),
+	COMPOSITE_NOMUX(0, "uart1_src", "uart_pll_clk", 0,
+			RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(1), 8, GFLAGS),
+	COMPOSITE_NOMUX(0, "uart2_src", "uart_pll_clk", 0,
+			RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(1), 8, GFLAGS),
+	COMPOSITE_FRAC(0, "uart0_frac", "uart0_src", CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(17), 0,
+			RK2928_CLKGATE_CON(1), 9, GFLAGS),
+	COMPOSITE_FRAC(0, "uart1_frac", "uart1_src", CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(18), 0,
+			RK2928_CLKGATE_CON(1), 11, GFLAGS),
+	COMPOSITE_FRAC(0, "uart2_frac", "uart2_src", CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(19), 0,
+			RK2928_CLKGATE_CON(1), 13, GFLAGS),
+	MUX(SCLK_UART0, "sclk_uart0", mux_uart0_p, CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(13), 8, 2, MFLAGS),
+	MUX(SCLK_UART1, "sclk_uart1", mux_uart1_p, CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(14), 8, 2, MFLAGS),
+	MUX(SCLK_UART2, "sclk_uart2", mux_uart2_p, CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(15), 8, 2, MFLAGS),
+
+	/* PD_VIDEO */
+	COMPOSITE(0, "aclk_vcodec", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(32), 14, 2, MFLAGS, 8, 5, DFLAGS,
+			RK2928_CLKGATE_CON(3), 11, GFLAGS),
+
+	COMPOSITE(0, "aclk_hvec", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(20), 0, 2, MFLAGS, 2, 5, DFLAGS,
+			RK2928_CLKGATE_CON(10), 6, GFLAGS),
+
+	/* PD_VIO */
+	COMPOSITE(0, "aclk_disp1_pre", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(31), 14, 2, MFLAGS, 8, 5, DFLAGS,
+			RK2928_CLKGATE_CON(1), 4, GFLAGS),
+	COMPOSITE(0, "hclk_disp_pre", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(30), 14, 2, MFLAGS, 8, 5, DFLAGS,
+			RK2928_CLKGATE_CON(0), 11, GFLAGS),
+	COMPOSITE(DCLK_LCDC, "dclk_lcdc", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(28), 0, 2, MFLAGS, 8, 8, DFLAGS,
+			RK2928_CLKGATE_CON(3), 2, GFLAGS),
+
+	/* MMC */
+	COMPOSITE_NODIV(0, "sclk_sdmmc_src", mux_mmc_src_p, 0,
+			RK2928_CLKSEL_CON(12), 8, 2, DFLAGS,
+			RK2928_CLKGATE_CON(2), 11, GFLAGS),
+	DIV(SCLK_SDMMC, "sclk_sdmmc", "sclk_sdmmc_src", 0,
+			RK2928_CLKSEL_CON(11), 0, 7, DFLAGS),
+
+	COMPOSITE_NODIV(0, "sclk_sdio_src", mux_mmc_src_p, 0,
+			RK2928_CLKSEL_CON(12), 10, 2, DFLAGS,
+			RK2928_CLKGATE_CON(2), 13, GFLAGS),
+	DIV(SCLK_SDIO, "sclk_sdio", "sclk_sdio_src", 0,
+			RK2928_CLKSEL_CON(11), 8, 7, DFLAGS),
+
+	COMPOSITE(SCLK_EMMC, "sclk_emmc", mux_mmc_src_p, 0,
+			RK2928_CLKSEL_CON(12), 12, 2, MFLAGS, 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(2), 14, GFLAGS),
+
+	MMC(SCLK_SDMMC_DRV,    "sdmmc_drv",    "sclk_sdmmc", RK3036_SDMMC_CON0, 1),
+	MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "sclk_sdmmc", RK3036_SDMMC_CON1, 0),
+
+	MMC(SCLK_SDIO_DRV,    "sdio_drv",    "sclk_sdio", RK3036_SDIO_CON0, 1),
+	MMC(SCLK_SDIO_SAMPLE, "sdio_sample", "sclk_sdio", RK3036_SDIO_CON1, 0),
+
+	MMC(SCLK_EMMC_DRV,     "emmc_drv",     "sclk_emmc",  RK3036_EMMC_CON0,  1),
+	MMC(SCLK_EMMC_SAMPLE,  "emmc_sample",  "sclk_emmc",  RK3036_EMMC_CON1,  0),
+
+	/* I2S */
+	COMPOSITE(0, "i2s_src", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(3), 14, 1, MFLAGS, 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(0), 9, GFLAGS),
+	COMPOSITE_FRAC(0, "i2s_frac", "i2s_src", CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(7), 0,
+			RK2928_CLKGATE_CON(0), 10, GFLAGS),
+	MUX(0, "i2s_pre", mux_i2s_pre_p, CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(3), 8, 2, MFLAGS),
+	COMPOSITE_NODIV(SCLK_I2S_OUT, "i2s_clkout", mux_i2s_clkout_p, 0,
+			RK2928_CLKSEL_CON(4), 12, 1, MFLAGS,
+			RK2928_CLKGATE_CON(0), 13, GFLAGS),
+	GATE(SCLK_I2S, "sclk_i2s", "i2s_pre", CLK_SET_RATE_PARENT,
+			RK2928_CLKGATE_CON(0), 14, GFLAGS),
+
+	COMPOSITE(0, "spdif_src", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(5), 10, 2, MFLAGS, 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(2), 10, GFLAGS),
+	COMPOSITE_FRAC(0, "spdif_frac", "spdif_src", 0,
+			RK2928_CLKSEL_CON(9), 0,
+			RK2928_CLKGATE_CON(2), 12, GFLAGS),
+	MUX(SCLK_SPDIF, "sclk_spdif", mux_spdif_p, 0,
+			RK2928_CLKSEL_CON(5), 8, 2, MFLAGS),
+
+	GATE(0, "hsicphy12m_xin12m", "xin12m", 0,
+			RK2928_CLKGATE_CON(1), 5, GFLAGS),
+
+	COMPOSITE(SCLK_GPU, "sclk_gpu", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(34), 8, 2, MFLAGS, 0, 5, DFLAGS,
+			RK2928_CLKGATE_CON(3), 13, GFLAGS),
+
+	COMPOSITE(SCLK_SPI, "sclk_spi", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(25), 8, 2, MFLAGS, 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(2), 9, GFLAGS),
+
+	COMPOSITE(SCLK_NANDC, "sclk_nandc", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(16), 8, 2, MFLAGS, 10, 5, DFLAGS,
+			RK2928_CLKGATE_CON(10), 4, GFLAGS),
+
+	COMPOSITE(SCLK_SFC, "sclk_sfc", mux_pll_src_apll_gpll_dpll_usb480m_p, 0,
+			RK2928_CLKSEL_CON(16), 0, 2, MFLAGS, 2, 5, DFLAGS,
+			RK2928_CLKGATE_CON(10), 5, GFLAGS),
+
+	/* MAC */
+	COMPOSITE_NOGATE(0, "mac_pll_src", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(21), 0, 2, MFLAGS, 4, 5, DFLAGS),
+	/* for clk_mac_ref & clk_mac_refout */
+	MUX(SCLK_MACREF, "mac_clk_ref", mux_mac_p, CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(21), 3, 1, MFLAGS),
+
+	COMPOSITE_NOMUX(SCLK_MAC, "mac_clk", "mac_clk_ref", 0,
+			RK2928_CLKSEL_CON(21), 9, 5, DFLAGS,
+			RK2928_CLKGATE_CON(2), 6, GFLAGS),
+
+	/* HDMI */
+	/* total clks: pin_sys_clk / pin_sck / pin_mclk / pin_vclk / pin_vclk_pllref */
+	/* the same with dclk_lcdc */
+	COMPOSITE(0, "dclk_hdmi_src", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(28), 0, 2, MFLAGS, 8, 8, DFLAGS,
+			RK2928_CLKGATE_CON(3), 2, GFLAGS),
+	/* hdmi dclk from dclk_lcdc directly */
+	MUX(SCLK_HDMI, "dclk_hdmi", mux_dclk_p, 0,
+			RK2928_CLKSEL_CON(31), 0, 1, MFLAGS),
+
+	/*
+	 * Clock-Architecture Diagram 3
+	 */
+
+	/* aclk_cpu gates */
+	GATE(0, "sclk_intmem", "aclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 12, GFLAGS),
+	GATE(0, "aclk_strc_sys", "aclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 10, GFLAGS),
+
+	/* hclk_cpu gates */
+	GATE(HCLK_ROM, "hclk_rom", "hclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 6, GFLAGS),
+
+	/* pclk_cpu gates */
+	GATE(PCLK_GRF, "pclk_grf", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 4, GFLAGS),
+	GATE(PCLK_DDRUPCTL, "pclk_ddrupctl", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 7, GFLAGS),
+	GATE(ACLK_VCODEC, "pclk_acodec", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 14, GFLAGS),
+	GATE(PCLK_HDMI, "pclk_hdmi", "pclk_cpu", 0, RK2928_CLKGATE_CON(3), 8, GFLAGS),
+
+	/* aclk_vio gates */
+	GATE(ACLK_VIO, "aclk_vio", "aclk_disp1_pre", 0,
+			RK2928_CLKGATE_CON(6), 13, GFLAGS),
+	GATE(ACLK_LCDC, "aclk_lcdc", "aclk_disp1_pre", 0,
+			RK2928_CLKGATE_CON(9), 6, GFLAGS),
+
+	GATE(HCLK_VIO_BUS, "hclk_vio_bus", "hclk_disp_pre", 0,
+			RK2928_CLKGATE_CON(6), 12, GFLAGS),
+	GATE(HCLK_LCDC, "hclk_lcdc", "hclk_disp_pre", 0,
+			RK2928_CLKGATE_CON(9), 5, GFLAGS),
+
+	/* aclk_video gates */
+	GATE(HCLK_LCDC, "hclk_vcodec", "hclk_disp_pre", 0,
+			RK2928_CLKGATE_CON(3), 12, GFLAGS),
+
+	/* xin24m gates */
+	GATE(SCLK_PVTM_CORE, "sclk_pvtm_core", "xin24m", 0, RK2928_CLKGATE_CON(10), 0, GFLAGS),
+	GATE(SCLK_PVTM_GPU, "sclk_pvtm_gpu", "xin24m", 0, RK2928_CLKGATE_CON(10), 1, GFLAGS),
+
+	/* aclk_peri gates */
+	GATE(0, "aclk_peri_axi_matrix", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 3, GFLAGS),
+	GATE(0, "aclk_cpu_peri", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 2, GFLAGS),
+	GATE(ACLK_DMAC2, "aclk_dmac2", "aclk_peri", 0, RK2928_CLKGATE_CON(5), 1, GFLAGS),
+	GATE(0, "aclk_peri_niu", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 15, GFLAGS),
+
+	/* hclk_peri gates */
+	GATE(0, "hclk_peri_matrix", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 0, GFLAGS),
+	GATE(0, "hclk_usb_peri", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 13, GFLAGS),
+	GATE(0, "hclk_peri_arbi", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 14, GFLAGS),
+	GATE(HCLK_NANDC, "hclk_nandc", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 9, GFLAGS),
+	GATE(HCLK_SDMMC, "hclk_sdmmc", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 10, GFLAGS),
+	GATE(HCLK_SDIO, "hclk_sdio", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 11, GFLAGS),
+	GATE(HCLK_EMMC, "hclk_emmc", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 0, GFLAGS),
+	GATE(HCLK_OTG0, "hclk_otg0", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 13, GFLAGS),
+	GATE(HCLK_OTG1, "hclk_otg1", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(7), 13, GFLAGS),
+	GATE(HCLK_I2S, "hclk_i2s", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(7), 2, GFLAGS),
+	GATE(0, "hclk_sfc", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 14, GFLAGS),
+	GATE(0, "hclk_mac", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 15, GFLAGS),
+
+	/* pclk_peri gates */
+	GATE(0, "pclk_peri_matrix", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 1, GFLAGS),
+	GATE(0, "pclk_efuse", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 2, GFLAGS),
+	GATE(PCLK_TIMER, "pclk_timer0", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 7, GFLAGS),
+	GATE(PCLK_PWM, "pclk_pwm", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 10, GFLAGS),
+	GATE(PCLK_SPI, "pclk_spi", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 12, GFLAGS),
+	GATE(PCLK_WDT, "pclk_wdt", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 15, GFLAGS),
+	GATE(PCLK_UART0, "pclk_uart0", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 0, GFLAGS),
+	GATE(PCLK_UART1, "pclk_uart1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 1, GFLAGS),
+	GATE(PCLK_UART2, "pclk_uart2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 2, GFLAGS),
+	GATE(PCLK_I2C0, "pclk_i2c0", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 4, GFLAGS),
+	GATE(PCLK_I2C1, "pclk_i2c1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 5, GFLAGS),
+	GATE(PCLK_I2C2, "pclk_i2c2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 6, GFLAGS),
+	GATE(PCLK_GPIO0, "pclk_gpio0", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 9, GFLAGS),
+	GATE(PCLK_GPIO1, "pclk_gpio1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 10, GFLAGS),
+	GATE(PCLK_GPIO2, "pclk_gpio2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 11, GFLAGS),
+};
+
+static const char *const rk3036_critical_clocks[] __initconst = {
+	"aclk_cpu",
+	"aclk_peri",
+	"hclk_peri",
+	"pclk_peri",
+};
+
+static void __init rk3036_clk_init(struct device_node *np)
+{
+	void __iomem *reg_base;
+	struct clk *clk;
+
+	reg_base = of_iomap(np, 0);
+	if (!reg_base) {
+		pr_err("%s: could not map cru region\n", __func__);
+		return;
+	}
+
+	rockchip_clk_init(np, reg_base, CLK_NR_CLKS);
+
+	/* xin12m is created by an cru-internal divider */
+	clk = clk_register_fixed_factor(NULL, "xin12m", "xin24m", 0, 1, 2);
+	if (IS_ERR(clk))
+		pr_warn("%s: could not register clock xin12m: %ld\n",
+			__func__, PTR_ERR(clk));
+
+	clk = clk_register_fixed_factor(NULL, "usb480m", "xin24m", 0, 20, 1);
+	if (IS_ERR(clk))
+		pr_warn("%s: could not register clock usb480m: %ld\n",
+			__func__, PTR_ERR(clk));
+
+	clk = clk_register_fixed_factor(NULL, "ddrphy", "ddrphy2x", 0, 1, 2);
+	if (IS_ERR(clk))
+		pr_warn("%s: could not register clock ddrphy: %ld\n",
+			__func__, PTR_ERR(clk));
+
+	clk = clk_register_fixed_factor(NULL, "hclk_vcodec_pre",
+					"aclk_vcodec", 0, 1, 4);
+	if (IS_ERR(clk))
+		pr_warn("%s: could not register clock hclk_vcodec_pre: %ld\n",
+			__func__, PTR_ERR(clk));
+
+	clk = clk_register_fixed_factor(NULL, "sclk_macref_out",
+					"hclk_peri_src", 0, 1, 2);
+	if (IS_ERR(clk))
+		pr_warn("%s: could not register clock sclk_macref_out: %ld\n",
+			__func__, PTR_ERR(clk));
+
+	rockchip_clk_register_plls(rk3036_pll_clks,
+				   ARRAY_SIZE(rk3036_pll_clks),
+				   -1);
+	rockchip_clk_register_branches(rk3036_clk_branches,
+				  ARRAY_SIZE(rk3036_clk_branches));
+	rockchip_clk_protect_critical(rk3036_critical_clocks,
+				      ARRAY_SIZE(rk3036_critical_clocks));
+
+	rockchip_clk_register_armclk(ARMCLK, "armclk",
+			mux_armclk_p, ARRAY_SIZE(mux_armclk_p),
+			&rk3036_cpuclk_data, rk3036_cpuclk_rates,
+			ARRAY_SIZE(rk3036_cpuclk_rates));
+
+	rockchip_register_softrst(np, 9, reg_base + RK2928_SOFTRST_CON(0),
+				  ROCKCHIP_SOFTRST_HIWORD_MASK);
+
+	rockchip_register_restart_notifier(RK2928_GLB_SRST_FST);
+}
+CLK_OF_DECLARE(rk3036_cru, "rockchip,rk3036-cru", rk3036_clk_init);
diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h
index dc8ecb2..6603c07 100644
--- a/drivers/clk/rockchip/clk.h
+++ b/drivers/clk/rockchip/clk.h
@@ -2,6 +2,9 @@ 
  * Copyright (c) 2014 MundoReader S.L.
  * Author: Heiko Stuebner <heiko@sntech.de>
  *
+ * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
+ * Author: Xing Zheng <zhengxing@rock-chips.com>
+ *
  * based on
  *
  * samsung/clk.h
@@ -40,6 +43,13 @@  struct clk;
 #define RK2928_SOFTRST_CON(x)	((x) * 0x4 + 0x110)
 #define RK2928_MISC_CON		0x134
 
+#define RK3036_SDMMC_CON0		0x144
+#define RK3036_SDMMC_CON1		0x148
+#define RK3036_SDIO_CON0		0x14c
+#define RK3036_SDIO_CON1		0x150
+#define RK3036_EMMC_CON0		0x154
+#define RK3036_EMMC_CON1		0x158
+
 #define RK3288_PLL_CON(x)		RK2928_PLL_CON(x)
 #define RK3288_MODE_CON			0x50
 #define RK3288_CLKSEL_CON(x)		((x) * 0x4 + 0x60)
@@ -75,6 +85,7 @@  struct clk;
 
 enum rockchip_pll_type {
 	pll_rk3066,
+	pll_rk3036,
 };
 
 #define RK3066_PLL_RATE(_rate, _nr, _nf, _no)	\
@@ -95,12 +106,31 @@  enum rockchip_pll_type {
 	.nb = _nb,						\
 }
 
+#define RK3036_PLL_RATE(_rate, _refdiv, _fbdiv, _postdiv1,	\
+			_postdiv2, _dsmpd, _frac)		\
+{								\
+	.rate	= _rate##U,					\
+	.fbdiv = _fbdiv,					\
+	.postdiv1 = _postdiv1,					\
+	.refdiv = _refdiv,					\
+	.postdiv2 = _postdiv2,					\
+	.dsmpd = _dsmpd,					\
+	.frac = _frac,						\
+}
+
 struct rockchip_pll_rate_table {
 	unsigned long rate;
 	unsigned int nr;
 	unsigned int nf;
 	unsigned int no;
 	unsigned int nb;
+	/* for RK3036 */
+	unsigned int fbdiv;
+	unsigned int postdiv1;
+	unsigned int refdiv;
+	unsigned int postdiv2;
+	unsigned int dsmpd;
+	unsigned int frac;
 };
 
 /**