diff mbox

[14/14] ARM: dts: qs600: Add SD card detect support.

Message ID 1442579538-20525-1-git-send-email-srinivas.kandagatla@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Srinivas Kandagatla Sept. 18, 2015, 12:32 p.m. UTC 
This patch adds SD card detect support.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

Comments

Igor Grinberg Sept. 21, 2015, 6:31 a.m. UTC | #1 
On 09/18/15 15:32, Srinivas Kandagatla wrote:
> This patch adds SD card detect support.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

Acked-by: Igor Grinberg <grinberg@compulab.co.il>

> ---
>  arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> index cc9d942..03784f1 100644
> --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> @@ -29,6 +29,16 @@
>  	};
>  
>  	soc {
> +		pinctrl@800000 {
> +			card_detect: card_detect {
> +				mux {
> +					pins = "gpio26";
> +					function = "gpio";
> +					bias-disable;
> +				};
> +			};
> +		};
> +
>  		rpm@108000 {
>  			regulators {
>  				vin_lvs1_3_6-supply = <&pm8921_s4>;
> @@ -197,6 +207,9 @@
>  			sdcc3: sdcc@12180000 {
>  				status = "okay";
>  				vmmc-supply = <&v3p3_fixed>;
> +				pinctrl-names	= "default";
> +				pinctrl-0	= <&card_detect>;
> +				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
>  			};
>  			/* WLAN */
>  			sdcc4: sdcc@121c0000 {
>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index cc9d942..03784f1 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -29,6 +29,16 @@ 
 	};
 
 	soc {
+		pinctrl@800000 {
+			card_detect: card_detect {
+				mux {
+					pins = "gpio26";
+					function = "gpio";
+					bias-disable;
+				};
+			};
+		};
+
 		rpm@108000 {
 			regulators {
 				vin_lvs1_3_6-supply = <&pm8921_s4>;
@@ -197,6 +207,9 @@ 
 			sdcc3: sdcc@12180000 {
 				status = "okay";
 				vmmc-supply = <&v3p3_fixed>;
+				pinctrl-names	= "default";
+				pinctrl-0	= <&card_detect>;
+				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
 			};
 			/* WLAN */
 			sdcc4: sdcc@121c0000 {