diff mbox

[v2,1/4] ARM: dts: sun4i: gemei-g9: Add accelerometer (bma250) IRQ

Message ID 1442993914-20295-2-git-send-email-plaes@plaes.org (mailing list archive)
State New, archived
Headers show

Commit Message

Priit Laes Sept. 23, 2015, 7:38 a.m. UTC 
Add IRQ configuration for bma250 accelerometer.

Signed-off-by: Priit Laes <plaes@plaes.org>
---
 arch/arm/boot/dts/sun4i-a10-gemei-g9.dts | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

Comments

Maxime Ripard Sept. 25, 2015, 6:33 a.m. UTC | #1 
On Wed, Sep 23, 2015 at 10:38:31AM +0300, Priit Laes wrote:
> Add IRQ configuration for bma250 accelerometer.
> 
> Signed-off-by: Priit Laes <plaes@plaes.org>

Applied, thanks!

Maxime
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
index 570754d..3f0aeb8 100644
--- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
+++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
@@ -47,6 +47,7 @@ 
 #include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Gemei G9 Tablet";
@@ -64,7 +65,7 @@ 
 /*
  * TODO:
  *   2x cameras via CSI
- *   bma250 IRQs
+ *   audio
  *   AXP battery management
  *   NAND
  *   OTG
@@ -103,12 +104,8 @@ 
 	bma250@18 {
 		compatible = "bosch,bma250";
 		reg = <0x18>;
-
-		/*
-		 * TODO: interrupt pins:
-		 * int1 - PH00
-		 * int2 - PI10
-		 */
+		interrupt-parent = <&pio>;
+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH00 / EINT0 */
 	};
 };