diff mbox

[V5,1/2] arm64: Change memcpy in kernel to use the copy template file

Message ID 1443034539-1848-2-git-send-email-fkan@apm.com (mailing list archive)
State New, archived
Headers show

Commit Message

Feng Kan Sept. 23, 2015, 6:55 p.m. UTC
This converts the memcpy.S to use the copy template file. The copy
template file was based originally on the memcpy.S

Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: Balamurugan Shanmugam <bshanmugam@apm.com>
---
 arch/arm64/lib/copy_template.S | 195 +++++++++++++++++++++++++++++++++++++++++
 arch/arm64/lib/memcpy.S        | 179 ++++++-------------------------------
 2 files changed, 221 insertions(+), 153 deletions(-)
 create mode 100644 arch/arm64/lib/copy_template.S
diff mbox

Patch

diff --git a/arch/arm64/lib/copy_template.S b/arch/arm64/lib/copy_template.S
new file mode 100644
index 0000000..048e66b
--- /dev/null
+++ b/arch/arm64/lib/copy_template.S
@@ -0,0 +1,195 @@ 
+/*
+ * Copyright (C) 2013 ARM Ltd.
+ * Copyright (C) 2013 Linaro.
+ *
+ * This code is based on glibc cortex strings work originally authored by Linaro
+ * and re-licensed under GPLv2 for the Linux kernel. The original code can
+ * be found @
+ *
+ * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/
+ * files/head:/src/aarch64/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+/*
+ * Copy a buffer from src to dest (alignment handled by the hardware)
+ *
+ * Parameters:
+ *	x0 - dest
+ *	x1 - src
+ *	x2 - n
+ * Returns:
+ *	x0 - dest
+ */
+dstin	.req	x0
+src	.req	x1
+count	.req	x2
+tmp1	.req	x3
+tmp1w	.req	w3
+tmp2	.req	x4
+tmp2w	.req	w4
+tmp3	.req	x5
+tmp3w	.req	w5
+dst	.req	x6
+
+A_l	.req	x7
+A_h	.req	x8
+B_l	.req	x9
+B_h	.req	x10
+C_l	.req	x11
+C_h	.req	x12
+D_l	.req	x13
+D_h	.req	x14
+
+	mov	dst, dstin
+	cmp	count, #16
+	/*When memory length is less than 16, the accessed are not aligned.*/
+	b.lo	.Ltiny15
+
+	neg	tmp2, src
+	ands	tmp2, tmp2, #15/* Bytes to reach alignment. */
+	b.eq	.LSrcAligned
+	sub	count, count, tmp2
+	/*
+	* Copy the leading memory data from src to dst in an increasing
+	* address order.By this way,the risk of overwritting the source
+	* memory data is eliminated when the distance between src and
+	* dst is less than 16. The memory accesses here are alignment.
+	*/
+	tbz	tmp2, #0, 1f
+	ldrb1	tmp1w, src, #1
+	strb1	tmp1w, dst, #1
+1:
+	tbz	tmp2, #1, 2f
+	ldrh1	tmp1w, src, #2
+	strh1	tmp1w, dst, #2
+2:
+	tbz	tmp2, #2, 3f
+	ldr1	tmp1w, src, #4
+	str1	tmp1w, dst, #4
+3:
+	tbz	tmp2, #3, .LSrcAligned
+	ldr1	tmp1, src, #8
+	str1	tmp1, dst, #8
+
+.LSrcAligned:
+	cmp	count, #64
+	b.ge	.Lcpy_over64
+	/*
+	* Deal with small copies quickly by dropping straight into the
+	* exit block.
+	*/
+.Ltail63:
+	/*
+	* Copy up to 48 bytes of data. At this point we only need the
+	* bottom 6 bits of count to be accurate.
+	*/
+	ands	tmp1, count, #0x30
+	b.eq	.Ltiny15
+	cmp	tmp1w, #0x20
+	b.eq	1f
+	b.lt	2f
+	ldp1	A_l, A_h, src, #16
+	stp1	A_l, A_h, dst, #16
+1:
+	ldp1	A_l, A_h, src, #16
+	stp1	A_l, A_h, dst, #16
+2:
+	ldp1	A_l, A_h, src, #16
+	stp1	A_l, A_h, dst, #16
+.Ltiny15:
+	/*
+	* Prefer to break one ldp/stp into several load/store to access
+	* memory in an increasing address order,rather than to load/store 16
+	* bytes from (src-16) to (dst-16) and to backward the src to aligned
+	* address,which way is used in original cortex memcpy. If keeping
+	* the original memcpy process here, memmove need to satisfy the
+	* precondition that src address is at least 16 bytes bigger than dst
+	* address,otherwise some source data will be overwritten when memove
+	* call memcpy directly. To make memmove simpler and decouple the
+	* memcpy's dependency on memmove, withdrew the original process.
+	*/
+	tbz	count, #3, 1f
+	ldr1	tmp1, src, #8
+	str1	tmp1, dst, #8
+1:
+	tbz	count, #2, 2f
+	ldr1	tmp1w, src, #4
+	str1	tmp1w, dst, #4
+2:
+	tbz	count, #1, 3f
+	ldrh1	tmp1w, src, #2
+	strh1	tmp1w, dst, #2
+3:
+	tbz	count, #0, .Lexitfunc
+	ldrb1	tmp1w, src, #1
+	strb1	tmp1w, dst, #1
+
+	b	.Lexitfunc
+
+.Lcpy_over64:
+	subs	count, count, #128
+	b.ge	.Lcpy_body_large
+	/*
+	* Less than 128 bytes to copy, so handle 64 here and then jump
+	* to the tail.
+	*/
+	ldp1	A_l, A_h, src, #16
+	stp1	A_l, A_h, dst, #16
+	ldp1	B_l, B_h, src, #16
+	ldp1	C_l, C_h, src, #16
+	stp1	B_l, B_h, dst, #16
+	stp1	C_l, C_h, dst, #16
+	ldp1	D_l, D_h, src, #16
+	stp1	D_l, D_h, dst, #16
+
+	tst	count, #0x3f
+	b.ne	.Ltail63
+	b	.Lexitfunc
+
+	/*
+	* Critical loop.  Start at a new cache line boundary.  Assuming
+	* 64 bytes per line this ensures the entire loop is in one line.
+	*/
+	.p2align	L1_CACHE_SHIFT
+.Lcpy_body_large:
+	/* pre-get 64 bytes data. */
+	ldp1	A_l, A_h, src, #16
+	ldp1	B_l, B_h, src, #16
+	ldp1	C_l, C_h, src, #16
+	ldp1	D_l, D_h, src, #16
+1:
+	/*
+	* interlace the load of next 64 bytes data block with store of the last
+	* loaded 64 bytes data.
+	*/
+	stp1	A_l, A_h, dst, #16
+	ldp1	A_l, A_h, src, #16
+	stp1	B_l, B_h, dst, #16
+	ldp1	B_l, B_h, src, #16
+	stp1	C_l, C_h, dst, #16
+	ldp1	C_l, C_h, src, #16
+	stp1	D_l, D_h, dst, #16
+	ldp1	D_l, D_h, src, #16
+	subs	count, count, #64
+	b.ge	1b
+	stp1	A_l, A_h, dst, #16
+	stp1	B_l, B_h, dst, #16
+	stp1	C_l, C_h, dst, #16
+	stp1	D_l, D_h, dst, #16
+
+	tst	count, #0x3f
+	b.ne	.Ltail63
+.Lexitfunc:
diff --git a/arch/arm64/lib/memcpy.S b/arch/arm64/lib/memcpy.S
index 8a9a96d..173a1aa 100644
--- a/arch/arm64/lib/memcpy.S
+++ b/arch/arm64/lib/memcpy.S
@@ -36,166 +36,39 @@ 
  * Returns:
  *	x0 - dest
  */
-dstin	.req	x0
-src	.req	x1
-count	.req	x2
-tmp1	.req	x3
-tmp1w	.req	w3
-tmp2	.req	x4
-tmp2w	.req	w4
-tmp3	.req	x5
-tmp3w	.req	w5
-dst	.req	x6
+	.macro ldrb1 ptr, regB, val
+	ldrb  \ptr, [\regB], \val
+	.endm
 
-A_l	.req	x7
-A_h	.req	x8
-B_l	.req	x9
-B_h	.req	x10
-C_l	.req	x11
-C_h	.req	x12
-D_l	.req	x13
-D_h	.req	x14
+	.macro strb1 ptr, regB, val
+	strb \ptr, [\regB], \val
+	.endm
 
-ENTRY(memcpy)
-	mov	dst, dstin
-	cmp	count, #16
-	/*When memory length is less than 16, the accessed are not aligned.*/
-	b.lo	.Ltiny15
+	.macro ldrh1 ptr, regB, val
+	ldrh  \ptr, [\regB], \val
+	.endm
 
-	neg	tmp2, src
-	ands	tmp2, tmp2, #15/* Bytes to reach alignment. */
-	b.eq	.LSrcAligned
-	sub	count, count, tmp2
-	/*
-	* Copy the leading memory data from src to dst in an increasing
-	* address order.By this way,the risk of overwritting the source
-	* memory data is eliminated when the distance between src and
-	* dst is less than 16. The memory accesses here are alignment.
-	*/
-	tbz	tmp2, #0, 1f
-	ldrb	tmp1w, [src], #1
-	strb	tmp1w, [dst], #1
-1:
-	tbz	tmp2, #1, 2f
-	ldrh	tmp1w, [src], #2
-	strh	tmp1w, [dst], #2
-2:
-	tbz	tmp2, #2, 3f
-	ldr	tmp1w, [src], #4
-	str	tmp1w, [dst], #4
-3:
-	tbz	tmp2, #3, .LSrcAligned
-	ldr	tmp1, [src],#8
-	str	tmp1, [dst],#8
+	.macro strh1 ptr, regB, val
+	strh \ptr, [\regB], \val
+	.endm
 
-.LSrcAligned:
-	cmp	count, #64
-	b.ge	.Lcpy_over64
-	/*
-	* Deal with small copies quickly by dropping straight into the
-	* exit block.
-	*/
-.Ltail63:
-	/*
-	* Copy up to 48 bytes of data. At this point we only need the
-	* bottom 6 bits of count to be accurate.
-	*/
-	ands	tmp1, count, #0x30
-	b.eq	.Ltiny15
-	cmp	tmp1w, #0x20
-	b.eq	1f
-	b.lt	2f
-	ldp	A_l, A_h, [src], #16
-	stp	A_l, A_h, [dst], #16
-1:
-	ldp	A_l, A_h, [src], #16
-	stp	A_l, A_h, [dst], #16
-2:
-	ldp	A_l, A_h, [src], #16
-	stp	A_l, A_h, [dst], #16
-.Ltiny15:
-	/*
-	* Prefer to break one ldp/stp into several load/store to access
-	* memory in an increasing address order,rather than to load/store 16
-	* bytes from (src-16) to (dst-16) and to backward the src to aligned
-	* address,which way is used in original cortex memcpy. If keeping
-	* the original memcpy process here, memmove need to satisfy the
-	* precondition that src address is at least 16 bytes bigger than dst
-	* address,otherwise some source data will be overwritten when memove
-	* call memcpy directly. To make memmove simpler and decouple the
-	* memcpy's dependency on memmove, withdrew the original process.
-	*/
-	tbz	count, #3, 1f
-	ldr	tmp1, [src], #8
-	str	tmp1, [dst], #8
-1:
-	tbz	count, #2, 2f
-	ldr	tmp1w, [src], #4
-	str	tmp1w, [dst], #4
-2:
-	tbz	count, #1, 3f
-	ldrh	tmp1w, [src], #2
-	strh	tmp1w, [dst], #2
-3:
-	tbz	count, #0, .Lexitfunc
-	ldrb	tmp1w, [src]
-	strb	tmp1w, [dst]
+	.macro ldr1 ptr, regB, val
+	ldr \ptr, [\regB], \val
+	.endm
 
-.Lexitfunc:
-	ret
+	.macro str1 ptr, regB, val
+	str \ptr, [\regB], \val
+	.endm
 
-.Lcpy_over64:
-	subs	count, count, #128
-	b.ge	.Lcpy_body_large
-	/*
-	* Less than 128 bytes to copy, so handle 64 here and then jump
-	* to the tail.
-	*/
-	ldp	A_l, A_h, [src],#16
-	stp	A_l, A_h, [dst],#16
-	ldp	B_l, B_h, [src],#16
-	ldp	C_l, C_h, [src],#16
-	stp	B_l, B_h, [dst],#16
-	stp	C_l, C_h, [dst],#16
-	ldp	D_l, D_h, [src],#16
-	stp	D_l, D_h, [dst],#16
+	.macro ldp1 ptr, regB, regC, val
+	ldp \ptr, \regB, [\regC], \val
+	.endm
 
-	tst	count, #0x3f
-	b.ne	.Ltail63
-	ret
+	.macro stp1 ptr, regB, regC, val
+	stp \ptr, \regB, [\regC], \val
+	.endm
 
-	/*
-	* Critical loop.  Start at a new cache line boundary.  Assuming
-	* 64 bytes per line this ensures the entire loop is in one line.
-	*/
-	.p2align	L1_CACHE_SHIFT
-.Lcpy_body_large:
-	/* pre-get 64 bytes data. */
-	ldp	A_l, A_h, [src],#16
-	ldp	B_l, B_h, [src],#16
-	ldp	C_l, C_h, [src],#16
-	ldp	D_l, D_h, [src],#16
-1:
-	/*
-	* interlace the load of next 64 bytes data block with store of the last
-	* loaded 64 bytes data.
-	*/
-	stp	A_l, A_h, [dst],#16
-	ldp	A_l, A_h, [src],#16
-	stp	B_l, B_h, [dst],#16
-	ldp	B_l, B_h, [src],#16
-	stp	C_l, C_h, [dst],#16
-	ldp	C_l, C_h, [src],#16
-	stp	D_l, D_h, [dst],#16
-	ldp	D_l, D_h, [src],#16
-	subs	count, count, #64
-	b.ge	1b
-	stp	A_l, A_h, [dst],#16
-	stp	B_l, B_h, [dst],#16
-	stp	C_l, C_h, [dst],#16
-	stp	D_l, D_h, [dst],#16
-
-	tst	count, #0x3f
-	b.ne	.Ltail63
+ENTRY(memcpy)
+#include "copy_template.S"
 	ret
 ENDPROC(memcpy)