diff mbox

[v5,4/7] pinctrl: freescale: imx: allow mux_reg offset zero

Message ID 1443128043-21063-4-git-send-email-aalonso@freescale.com (mailing list archive)
State New, archived
Headers show

Commit Message

Adrian Alonso Sept. 24, 2015, 8:54 p.m. UTC
Allow mux_reg offset zero to be a valid pin_id, on imx7d
mux_conf reg offset is zero for iomuxc-lspr controller

Signed-off-by: Adrian Alonso <aalonso@freescale.com>
---
Changes for V2: Resend
Changes for V3: Resend
Changes for V4: Simplify pin_id assigment when ZERO_OFFSET_VALID is set
Changes for V5:
- Drop patch pinctrl: freescale: imx: add ZERO_OFFSET_VALID flag
- Allow mux_reg ZERO OFFSET as pin_id

 drivers/pinctrl/freescale/pinctrl-imx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Markus Pargmann Sept. 25, 2015, 10:47 a.m. UTC | #1
On Thu, Sep 24, 2015 at 03:54:00PM -0500, Adrian Alonso wrote:
> Allow mux_reg offset zero to be a valid pin_id, on imx7d
> mux_conf reg offset is zero for iomuxc-lspr controller
> 
> Signed-off-by: Adrian Alonso <aalonso@freescale.com>
> ---
> Changes for V2: Resend
> Changes for V3: Resend
> Changes for V4: Simplify pin_id assigment when ZERO_OFFSET_VALID is set
> Changes for V5:
> - Drop patch pinctrl: freescale: imx: add ZERO_OFFSET_VALID flag
> - Allow mux_reg ZERO OFFSET as pin_id
> 
>  drivers/pinctrl/freescale/pinctrl-imx.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c
> index b9c6deb..23348d8 100644
> --- a/drivers/pinctrl/freescale/pinctrl-imx.c
> +++ b/drivers/pinctrl/freescale/pinctrl-imx.c
> @@ -550,7 +550,7 @@ static int imx_pinctrl_parse_groups(struct device_node *np,
>  				conf_reg = -1;
>  		}
>  
> -		pin_id = mux_reg ? mux_reg / 4 : conf_reg / 4;
> +		pin_id = (mux_reg != -1) ? mux_reg / 4 : conf_reg / 4;

This will break compatibility with imx35 and imx25 pinctrl drivers. They
have definitions where mux_reg can be 0x0. See imx35-pinfunc.h and
imx25-pinfunc.h:

	git grep -E "0x0+ 0x.* 0x.* 0x.* 0x.*"

This mux_reg behaviour was not described in the DT binding
documentation. But it is used by some platforms. So even if you change
the pincfunc headers to use "-1", it would break devicetrees compiled
with earlier kernel versions.

Regards,

Markus

>  		pin_reg = &info->pin_regs[pin_id];
>  		pin->pin = pin_id;
>  		grp->pin_ids[i] = pin_id;
> -- 
> 2.1.4
> 
> 
>
diff mbox

Patch

diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c
index b9c6deb..23348d8 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx.c
@@ -550,7 +550,7 @@  static int imx_pinctrl_parse_groups(struct device_node *np,
 				conf_reg = -1;
 		}
 
-		pin_id = mux_reg ? mux_reg / 4 : conf_reg / 4;
+		pin_id = (mux_reg != -1) ? mux_reg / 4 : conf_reg / 4;
 		pin_reg = &info->pin_regs[pin_id];
 		pin->pin = pin_id;
 		grp->pin_ids[i] = pin_id;