diff mbox

[RFT,3/3] ARM: dts: Fix usb3503 probe by enabling phy on exynos5250-arndale

Message ID 1444177807-15524-4-git-send-email-k.kozlowski@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Krzysztof Kozlowski Oct. 7, 2015, 12:30 a.m. UTC 
On Arndale board (unlike Odroid U3) the USB3503 hub controller is
connected in phy mode (not through I2C). For successful probe it needs
to get reference to proper phy and enable it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reported-by: Kevin Hilman <khilman@kernel.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: riku.voipio@linaro.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
---
 arch/arm/boot/dts/exynos5250-arndale.dts | 2 ++
 1 file changed, 2 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index c000532c1444..e213f31acbf3 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -114,6 +114,8 @@ 
 
 		reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
 		connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
+		phys = <&usb2_phy_gen 3>;
+		phy-names = "usb2-phy";
 	};
 };