[v3,1/3] dt-bindings: Document the STM32 HW RNG bindings

Commit Message

Daniel Thompson Oct. 14, 2015, 3:55 p.m. UTC

This adds documentation of device tree bindings for the STM32 hardware
random number generator.

Signed-off-by: Daniel Thompson <[e-mail]>
Acked-by: Maxime Coquelin <[e-mail]>
Acked-by: Rob Herring <[e-mail]>
---
 .../devicetree/bindings/rng/st,stm32-rng.txt        | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rng/st,stm32-rng.txt

Patch

diff --git a/Documentation/devicetree/bindings/rng/st,stm32-rng.txt b/Documentation/devicetree/bindings/rng/st,stm32-rng.txt
new file mode 100644
index 000000000000..47f04176f93b
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/st,stm32-rng.txt
@@ -0,0 +1,21 @@ 
+STMicroelectronics STM32 HW RNG
+===============================
+
+The STM32 hardware random number generator is a simple fixed purpose IP and
+is fully separated from other crypto functions.
+
+Required properties:
+
+- compatible : Should be "st,stm32-rng"
+- reg : Should be register base and length as documented in the datasheet
+- interrupts : The designated IRQ line for the RNG
+- clocks : The clock needed to enable the RNG
+
+Example:
+
+	rng: rng@50060800 {
+		compatible = "st,stm32-rng";
+		reg = <0x50060800 0x400>;
+		interrupts = <80>;
+		clocks = <&rcc 0 38>;
+	};