diff mbox

[net-next,2/2] Documentation: dts: xgene: Add TX/RX delay field

Message ID 1445027752-16982-3-git-send-email-isubramanian@apm.com (mailing list archive)
State New, archived
Headers show

Commit Message

Iyappan Subramanian Oct. 16, 2015, 8:35 p.m. UTC 
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
---
 Documentation/devicetree/bindings/net/apm-xgene-enet.txt | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
index f55aa28..5b17c13 100644
--- a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
+++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
@@ -37,6 +37,14 @@  Required properties for ethernet interfaces that have external PHY:
 
 Optional properties:
 - status: Should be "ok" or "disabled" for enabled/disabled. Default is "ok".
+- tx-delay: Delay value for RGMII TXD timming.
+	    Valid values are between 0 to 7, that maps to
+	    417, 717, 1020, 1321, 1611, 1913, 2215, 2514 ps
+	    Default value is 4, which corresponds to 1611 ps
+- rx-delay: Delay value for RGMII RXD timming in ps.
+	    Valid values are between 0 to 7, that maps to
+	    273, 589, 899, 1222, 1480, 1806, 2147, 2464 ps
+	    Default value is 2, which corresponds to 899 ps
 
 Example:
 	menetclk: menetclk {
@@ -72,5 +80,7 @@  Example:
 
 /* Board-specific peripheral configurations */
 &menet {
+	tx-delay = <4>;
+	rx-delay = <2>;
         status = "ok";
 };