diff mbox

[v9,15/17] drm: bridge: analogix/dp: try force hpd after plug in lookup failed

Message ID 1446167355-6387-1-git-send-email-ykk@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Yakir Yang Oct. 30, 2015, 1:09 a.m. UTC
Some edp screen do not have hpd signal, so we can't just return
failed when hpd plug in detect failed.

This is an hardware property, so we need add a devicetree property
"analogix,need-force-hpd" to indicate this sutiation.

Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- Add "analogix,need-force-hpd" to indicate whether driver need foce
  hpd when hpd detect failed.

Changes in v2: None

 .../bindings/display/bridge/analogix_dp.txt        |  4 ++-
 .../bindings/display/exynos/exynos_dp.txt          |  1 +
 .../display/rockchip/analogix_dp-rockchip.txt      |  1 +
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 36 +++++++++++++++++++---
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.h |  2 ++
 drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c  |  9 ++++++
 6 files changed, 47 insertions(+), 6 deletions(-)

Comments

Rob Herring (Arm) Nov. 11, 2015, 11:10 p.m. UTC | #1
On Fri, Oct 30, 2015 at 09:09:15AM +0800, Yakir Yang wrote:
> Some edp screen do not have hpd signal, so we can't just return
> failed when hpd plug in detect failed.
> 
> This is an hardware property, so we need add a devicetree property
> "analogix,need-force-hpd" to indicate this sutiation.
> 
> Tested-by: Heiko Stuebner <heiko@sntech.de>
> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
> ---

I didn't find this one in v10. Did it get dropped?

> Changes in v9: None
> Changes in v8: None
> Changes in v7: None
> Changes in v6: None
> Changes in v5: None
> Changes in v4: None
> Changes in v3:
> - Add "analogix,need-force-hpd" to indicate whether driver need foce
>   hpd when hpd detect failed.
> 
> Changes in v2: None
> 
>  .../bindings/display/bridge/analogix_dp.txt        |  4 ++-
>  .../bindings/display/exynos/exynos_dp.txt          |  1 +
>  .../display/rockchip/analogix_dp-rockchip.txt      |  1 +
>  drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 36 +++++++++++++++++++---
>  drivers/gpu/drm/bridge/analogix/analogix_dp_core.h |  2 ++
>  drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c  |  9 ++++++
>  6 files changed, 47 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> index 7659a7a..74f0e80 100644
> --- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> +++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> @@ -22,6 +22,9 @@ Required properties for dp-controller:
>  		from general PHY binding: Should be "dp".
>  
>  Optional properties for dp-controller:
> +	-analogix,need-force-hpd:
> +		Indicate driver need force hpd when hpd detect failed, this
> +		is used for some eDP screen which don't have hpd signal.

This should be a generic property.

Rob
Rob Herring (Arm) Nov. 12, 2015, 11:38 p.m. UTC | #2
On Thu, Nov 12, 2015 at 09:27:21AM +0800, Yakir Yang wrote:
> Hi Rob,
> 
> On 11/12/2015 07:10 AM, Rob Herring wrote:
> >On Fri, Oct 30, 2015 at 09:09:15AM +0800, Yakir Yang wrote:
> >>Some edp screen do not have hpd signal, so we can't just return
> >>failed when hpd plug in detect failed.
> >>
> >>This is an hardware property, so we need add a devicetree property
> >>"analogix,need-force-hpd" to indicate this sutiation.
> >>
> >>Tested-by: Heiko Stuebner <heiko@sntech.de>
> >>Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
> >>Signed-off-by: Yakir Yang <ykk@rock-chips.com>
> >>---
> >I didn't find this one in v10. Did it get dropped?
> 
> You are in my 'to' list, but I haven't send the whole v10 out,
> most of them don't need update :)

Okay, it's just gmail's inability to follow threading...
 
> This series should be:
> ---- [v8 0/17 ...]
>   |---- [v8 1/17 ...]
>   |---- [v8 2/17 ...]
>   |---- [v8 3/17 ...]
>   |---- [...]
>   |---- [v8 15/17 ...]
>   |---- [v8 16/17 ...]
>   |---- [v8 17/17 ...]
>   |
>   |---- [v9 10/17 ...]
>   |---- [v9 15/17 ...]
>      |---- We are here
>   |---- [v9 09/17 ...]
>   |---- [v10 09/17 ...]
>      |---- Received an acked from you


> >>diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> >>index 7659a7a..74f0e80 100644
> >>--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> >>+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> >>@@ -22,6 +22,9 @@ Required properties for dp-controller:
> >>  		from general PHY binding: Should be "dp".
> >>  Optional properties for dp-controller:
> >>+	-analogix,need-force-hpd:
> >>+		Indicate driver need force hpd when hpd detect failed, this
> >>+		is used for some eDP screen which don't have hpd signal.
> >This should be a generic property.
> 
> This property would only need in some no-hpd case, it would be dropped if
> panel keep the hotplug signal, that's why I thought it should be optional.

I agree it is optional. I just mean drop the analogix and put in a 
common binding doc (i.e. create a display/bridge/common.txt). Needing to 
ignore HPD is probably a common problem.

> I thought if we put this a property to generic property, then we must need
> to define it in normal device node, not sure whether it is right :)

Sorry, I don't follow.

Rob
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 7659a7a..74f0e80 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -22,6 +22,9 @@  Required properties for dp-controller:
 		from general PHY binding: Should be "dp".
 
 Optional properties for dp-controller:
+	-analogix,need-force-hpd:
+		Indicate driver need force hpd when hpd detect failed, this
+		is used for some eDP screen which don't have hpd signal.
 	-hpd-gpios:
 		Hotplug detect GPIO.
 		Indicates which GPIO should be used for hotplug detection
@@ -31,7 +34,6 @@  Optional properties for dp-controller:
 		* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
 		* Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
 
-
 [1]: Documentation/devicetree/bindings/media/video-interfaces.txt
 -------------------------------------------------------------------------------
 
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 9905081..8800164 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -41,6 +41,7 @@  For the below properties, please refer to Analogix DP binding document:
 	-phys (required)
 	-phy-names (required)
 	-hpd-gpios (optional)
+	-analogix,need-force-hpd (optional)
 	-video interfaces (optional)
 
 Deprecated properties for DisplayPort:
diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
index ec93917..be18388 100644
--- a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -31,6 +31,7 @@  For the below properties, please refer to Analogix DP binding document:
 - phys (required)
 - phy-names (required)
 - hpd-gpios (optional)
+- analogix,need-force-hpd (optional)
 -------------------------------------------------------------------------------
 
 Example:
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 563ffb1d..3842dbd 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -59,15 +59,38 @@  static int analogix_dp_detect_hpd(struct analogix_dp_device *dp)
 {
 	int timeout_loop = 0;
 
-	while (analogix_dp_get_plug_in_status(dp) != 0) {
+	while (timeout_loop < DP_TIMEOUT_LOOP_COUNT) {
+		if (analogix_dp_get_plug_in_status(dp) == 0)
+			return 0;
+
 		timeout_loop++;
-		if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
-			dev_err(dp->dev, "failed to get hpd plug status\n");
-			return -ETIMEDOUT;
-		}
 		usleep_range(10, 11);
 	}
 
+	/*
+	 * Some edp screen do not have hpd signal, so we can't just
+	 * return failed when hpd plug in detect failed, DT property
+	 * "need-force-hpd" would indicate whether driver need this.
+	 */
+	if (!dp->need_force_hpd)
+		return -ETIMEDOUT;
+
+	/*
+	 * The eDP TRM indicate that if HPD_STATUS(RO) is 0, AUX CH
+	 * will not work, so we need to give a force hpd action to
+	 * set HPD_STATUS manually.
+	 */
+	dev_dbg(dp->dev, "failed to get hpd plug status, try to force hpd\n");
+
+	analogix_dp_force_hpd(dp);
+
+	if (analogix_dp_get_plug_in_status(dp) != 0) {
+		dev_err(dp->dev, "failed to get hpd plug in status\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dp->dev, "success to get plug in status after force hpd\n");
+
 	return 0;
 }
 
@@ -1244,6 +1267,9 @@  int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
 	if (IS_ERR(dp->reg_base))
 		return PTR_ERR(dp->reg_base);
 
+	dp->need_force_hpd =
+		of_property_read_bool(dev->of_node, "analogix,need-force-hpd");
+
 	dp->hpd_gpio = of_get_named_gpio(dev->of_node, "hpd-gpios", 0);
 	if (!gpio_is_valid(dp->hpd_gpio))
 		dp->hpd_gpio = of_get_named_gpio(dev->of_node,
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index e6f8243..d3c7e0a 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -160,6 +160,7 @@  struct analogix_dp_device {
 	struct phy		*phy;
 	int			dpms_mode;
 	int			hpd_gpio;
+	bool                    need_force_hpd;
 
 	struct analogix_dp_plat_data *plat_data;
 };
@@ -180,6 +181,7 @@  void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
 				       bool enable);
 void analogix_dp_init_analog_func(struct analogix_dp_device *dp);
 void analogix_dp_init_hpd(struct analogix_dp_device *dp);
+void analogix_dp_force_hpd(struct analogix_dp_device *dp);
 enum dp_irq_type analogix_dp_get_irq_type(struct analogix_dp_device *dp);
 void analogix_dp_clear_hotplug_interrupts(struct analogix_dp_device *dp);
 void analogix_dp_reset_aux(struct analogix_dp_device *dp);
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index 21a3287..c7e2959 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -365,6 +365,15 @@  void analogix_dp_init_hpd(struct analogix_dp_device *dp)
 	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
 }
 
+void analogix_dp_force_hpd(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+	reg = (F_HPD | HPD_CTRL);
+	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+}
+
 enum dp_irq_type analogix_dp_get_irq_type(struct analogix_dp_device *dp)
 {
 	u32 reg;