@@ -131,7 +131,7 @@ static u32 setup_cfg2_yuv_swap(struct atmel_isi *isi,
static void configure_geometry(struct atmel_isi *isi, u32 width,
u32 height, const struct soc_camera_format_xlate *xlate)
{
- u32 cfg2;
+ u32 cfg2, psize;
/* According to sensor's output format to set cfg2 */
switch (xlate->code) {
@@ -159,6 +159,16 @@ static void configure_geometry(struct atmel_isi *isi, u32 width,
cfg2 |= ((height - 1) << ISI_CFG2_IM_VSIZE_OFFSET)
& ISI_CFG2_IM_VSIZE_MASK;
isi_writel(isi, ISI_CFG2, cfg2);
+
+ /* No down sampling, preview size equal to sensor output size */
+ psize = ((width - 1) << ISI_PSIZE_PREV_HSIZE_OFFSET) &
+ ISI_PSIZE_PREV_HSIZE_MASK;
+ psize |= ((height - 1) << ISI_PSIZE_PREV_VSIZE_OFFSET) &
+ ISI_PSIZE_PREV_VSIZE_MASK;
+ isi_writel(isi, ISI_PSIZE, psize);
+ isi_writel(isi, ISI_PDECF, ISI_PDECF_NO_SAMPLING);
+
+ return;
}
static bool is_supported(struct soc_camera_device *icd,
@@ -79,6 +79,16 @@
#define ISI_CFG2_IM_VSIZE_MASK (0x7FF << ISI_CFG2_IM_VSIZE_OFFSET)
#define ISI_CFG2_IM_HSIZE_MASK (0x7FF << ISI_CFG2_IM_HSIZE_OFFSET)
+/* Bitfields in PSIZE */
+#define ISI_PSIZE_PREV_VSIZE_OFFSET 0
+#define ISI_PSIZE_PREV_HSIZE_OFFSET 16
+#define ISI_PSIZE_PREV_VSIZE_MASK (0x3FF << ISI_PSIZE_PREV_VSIZE_OFFSET)
+#define ISI_PSIZE_PREV_HSIZE_MASK (0x3FF << ISI_PSIZE_PREV_HSIZE_OFFSET)
+
+/* Bitfields in PDECF */
+#define ISI_PDECF_DEC_FACTOR_MASK (0xFF << 0)
+#define ISI_PDECF_NO_SAMPLING (16)
+
/* Bitfields in CTRL */
/* Also using in SR(ISI_V2) */
#define ISI_CTRL_EN (1 << 0)
Not like codec path, preview path can do downsampling, so we should setup a extra preview width, height for it. This patch add preview resolution setup without down sampling. So currently preview path will output same size as sensor output size. Signed-off-by: Josh Wu <josh.wu@atmel.com> --- Changes in v2: None drivers/media/platform/soc_camera/atmel-isi.c | 12 +++++++++++- drivers/media/platform/soc_camera/atmel-isi.h | 10 ++++++++++ 2 files changed, 21 insertions(+), 1 deletion(-)