| Message ID | 1446700685-18017-6-git-send-email-wxt@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Nov 05, 2015 at 01:18:01PM +0800, Caesar Wang wrote: > The conversion table has the adc value and temperature. > In fact, the adc value only has the increment or decrement mode in > conversion table. > > Moment, we can add the flag to be better support the *code_to_temp* > for differenr SoCs. > > Signed-off-by: Caesar Wang <wxt@rock-chips.com> > --- > > Changes in v2: None > Changes in v1: None > > drivers/thermal/rockchip_thermal.c | 64 ++++++++++++++++++++++++++++++-------- > 1 file changed, 51 insertions(+), 13 deletions(-) > > diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c > index e828f18..9df027f 100644 > --- a/drivers/thermal/rockchip_thermal.c > +++ b/drivers/thermal/rockchip_thermal.c > @@ -53,6 +53,16 @@ enum sensor_id { > }; > > /** > +* The conversion table has the adc value and temperature. > +* ADC_DECREMENT is the adc value decremnet.(e.g. v2_code_table) > +* ADC_INCREMNET is the adc value incremnet.(e.g. v3_code_table) > +*/ > +enum adc_flag { > + ADC_DECREMENT = 0, > + ADC_INCREMENT, > +}; > + > +/** > * The max sensors is two in rockchip SoCs. > * Two sensors: CPU and GPU sensor. > */ > @@ -66,6 +76,9 @@ struct chip_tsadc_table { > > /* that analogic mask data */ > unsigned long data_mask; > + > + /* adc value is increment or decrement */ > + unsigned int flag; Maybe bool? And rename to something more meaningful? Or do you plan to have more conditions to test in your flag? > }; > > struct rockchip_tsadc_chip { > @@ -223,19 +236,43 @@ static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code, > > WARN_ON(table.length < 2); > > - code &= table.data_mask; > - if (code < table.id[high].code) > + switch (table.flag) { > + case ADC_DECREMENT: > + code &= table.data_mask; > + if (code < table.id[high].code) > return -EAGAIN; /* Incorrect reading */ Add an indentation. > > - while (low <= high) { > - if (code >= table.id[mid].code && > - code < table.id[mid - 1].code) > - break; > - else if (code < table.id[mid].code) > - low = mid + 1; > - else > - high = mid - 1; > - mid = (low + high) / 2; > + while (low <= high) { > + if (code >= table.id[mid].code && > + code < table.id[mid - 1].code) > + break; > + else if (code < table.id[mid].code) > + low = mid + 1; > + else > + high = mid - 1; > + > + mid = (low + high) / 2; > + } > + break; > + case ADC_INCREMENT: > + code &= table.data_mask; > + if (code < table.id[low].code) > + return -EAGAIN; /* Incorrect reading */ > + add an indentation. > + while (low <= high) { > + if (code >= table.id[mid - 1].code && > + code < table.id[mid].code) > + break; > + else if (code > table.id[mid].code) > + low = mid + 1; > + else > + high = mid - 1; > + > + mid = (low + high) / 2; > + } > + break; > + default: > + pr_err("Invalid the table conversion\n"); > } > > /* > @@ -245,8 +282,8 @@ static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code, > * to produce less granular result. > */ > num = table.id[mid].temp - v2_code_table[mid - 1].temp; > - num *= table.id[mid - 1].code - code; > - denom = table.id[mid - 1].code - table.id[mid].code; > + num *= abs(table.id[mid - 1].code - code); > + denom = abs(table.id[mid - 1].code - table.id[mid].code); > *temp = table.id[mid - 1].temp + (num / denom); > > return 0; > @@ -367,6 +404,7 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = { > .id = v2_code_table, > .length = ARRAY_SIZE(v2_code_table), > .data_mask = TSADCV2_DATA_MASK, > + .flag = ADC_DECREMENT, > }, > }; > > -- > 1.9.1 >
Hello Eduardo, ? 2015?11?07? 03:11, Eduardo Valentin ??: > On Thu, Nov 05, 2015 at 01:18:01PM +0800, Caesar Wang wrote: >> The conversion table has the adc value and temperature. >> In fact, the adc value only has the increment or decrement mode in >> conversion table. >> >> Moment, we can add the flag to be better support the *code_to_temp* >> for differenr SoCs. >> >> Signed-off-by: Caesar Wang <wxt@rock-chips.com> >> --- >> >> Changes in v2: None >> Changes in v1: None >> >> drivers/thermal/rockchip_thermal.c | 64 ++++++++++++++++++++++++++++++-------- >> 1 file changed, 51 insertions(+), 13 deletions(-) >> >> diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c >> index e828f18..9df027f 100644 >> --- a/drivers/thermal/rockchip_thermal.c >> +++ b/drivers/thermal/rockchip_thermal.c >> @@ -53,6 +53,16 @@ enum sensor_id { >> }; >> >> /** >> +* The conversion table has the adc value and temperature. >> +* ADC_DECREMENT is the adc value decremnet.(e.g. v2_code_table) >> +* ADC_INCREMNET is the adc value incremnet.(e.g. v3_code_table) >> +*/ >> +enum adc_flag { >> + ADC_DECREMENT = 0, >> + ADC_INCREMENT, >> +}; >> + >> +/** >> * The max sensors is two in rockchip SoCs. >> * Two sensors: CPU and GPU sensor. >> */ >> @@ -66,6 +76,9 @@ struct chip_tsadc_table { >> >> /* that analogic mask data */ >> unsigned long data_mask; >> + >> + /* adc value is increment or decrement */ >> + unsigned int flag; > > Maybe bool? And rename to something more meaningful? Sure, that should be a bool type. I guess the rename in sort_flag......(maybe will have a better name) > > Or do you plan to have more conditions to test in your flag? Moment, the flag (increment or decrement) can support all the rockchip series SoCs have thermal function. >> }; >> >> struct rockchip_tsadc_chip { >> @@ -223,19 +236,43 @@ static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code, >> >> WARN_ON(table.length < 2); >> >> - code &= table.data_mask; >> - if (code < table.id[high].code) >> + switch (table.flag) { >> + case ADC_DECREMENT: >> + code &= table.data_mask; >> + if (code < table.id[high].code) >> return -EAGAIN; /* Incorrect reading */ > Add an indentation. Thanks, will be fixed in next patch. >> >> - while (low <= high) { >> - if (code >= table.id[mid].code && >> - code < table.id[mid - 1].code) >> - break; >> - else if (code < table.id[mid].code) >> - low = mid + 1; >> - else >> - high = mid - 1; >> - mid = (low + high) / 2; >> + while (low <= high) { >> + if (code >= table.id[mid].code && >> + code < table.id[mid - 1].code) >> + break; >> + else if (code < table.id[mid].code) >> + low = mid + 1; >> + else >> + high = mid - 1; >> + >> + mid = (low + high) / 2; >> + } >> + break; >> + case ADC_INCREMENT: >> + code &= table.data_mask; >> + if (code < table.id[low].code) >> + return -EAGAIN; /* Incorrect reading */ >> + > add an indentation. Ditto. Thanks, Caesar > >> + while (low <= high) { >> + if (code >= table.id[mid - 1].code && >> + code < table.id[mid].code) >> + break; >> + else if (code > table.id[mid].code) >> + low = mid + 1; >> + else >> + high = mid - 1; >> + >> + mid = (low + high) / 2; >> + } >> + break; >> + default: >> + pr_err("Invalid the table conversion\n"); >> } >> >> /* >> @@ -245,8 +282,8 @@ static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code, >> * to produce less granular result. >> */ >> num = table.id[mid].temp - v2_code_table[mid - 1].temp; >> - num *= table.id[mid - 1].code - code; >> - denom = table.id[mid - 1].code - table.id[mid].code; >> + num *= abs(table.id[mid - 1].code - code); >> + denom = abs(table.id[mid - 1].code - table.id[mid].code); >> *temp = table.id[mid - 1].temp + (num / denom); >> >> return 0; >> @@ -367,6 +404,7 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = { >> .id = v2_code_table, >> .length = ARRAY_SIZE(v2_code_table), >> .data_mask = TSADCV2_DATA_MASK, >> + .flag = ADC_DECREMENT, >> }, >> }; >> >> -- >> 1.9.1 >> > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
? 2015?11?07? 23:38, Caesar Wang ??: > Hello Eduardo, > > ? 2015?11?07? 03:11, Eduardo Valentin ??: >> On Thu, Nov 05, 2015 at 01:18:01PM +0800, Caesar Wang wrote: >>> The conversion table has the adc value and temperature. >>> In fact, the adc value only has the increment or decrement mode in >>> conversion table. >>> >>> Moment, we can add the flag to be better support the *code_to_temp* >>> for differenr SoCs. >>> >>> Signed-off-by: Caesar Wang <wxt@rock-chips.com> >>> --- >>> >>> Changes in v2: None >>> Changes in v1: None >>> >>> drivers/thermal/rockchip_thermal.c | 64 >>> ++++++++++++++++++++++++++++++-------- >>> 1 file changed, 51 insertions(+), 13 deletions(-) >>> >>> diff --git a/drivers/thermal/rockchip_thermal.c >>> b/drivers/thermal/rockchip_thermal.c >>> index e828f18..9df027f 100644 >>> --- a/drivers/thermal/rockchip_thermal.c >>> +++ b/drivers/thermal/rockchip_thermal.c >>> @@ -53,6 +53,16 @@ enum sensor_id { >>> }; >>> /** >>> +* The conversion table has the adc value and temperature. >>> +* ADC_DECREMENT is the adc value decremnet.(e.g. v2_code_table) >>> +* ADC_INCREMNET is the adc value incremnet.(e.g. v3_code_table) >>> +*/ >>> +enum adc_flag { >>> + ADC_DECREMENT = 0, >>> + ADC_INCREMENT, >>> +}; >>> + >>> +/** >>> * The max sensors is two in rockchip SoCs. >>> * Two sensors: CPU and GPU sensor. >>> */ >>> @@ -66,6 +76,9 @@ struct chip_tsadc_table { >>> /* that analogic mask data */ >>> unsigned long data_mask; >>> + >>> + /* adc value is increment or decrement */ >>> + unsigned int flag; Sorry, I think to use the enum type will be better. Says: enum adc_sort_flag sort_flag; or enum adc_sort_mode mode; >> >> Maybe bool? And rename to something more meaningful? > > Sure, that should be a bool type. > I guess the rename in sort_flag......(maybe will have a better name) > > >> >> Or do you plan to have more conditions to test in your flag? > > Moment, the flag (increment or decrement) can support all the rockchip > series SoCs have thermal function. > >>> }; >>> struct rockchip_tsadc_chip { >>> @@ -223,19 +236,43 @@ static int rk_tsadcv2_code_to_temp(struct >>> chip_tsadc_table table, u32 code, >>> WARN_ON(table.length < 2); >>> - code &= table.data_mask; >>> - if (code < table.id[high].code) >>> + switch (table.flag) { >>> + case ADC_DECREMENT: >>> + code &= table.data_mask; >>> + if (code < table.id[high].code) >>> return -EAGAIN; /* Incorrect reading */ >> Add an indentation. > > Thanks, will be fixed in next patch. > > >>> - while (low <= high) { >>> - if (code >= table.id[mid].code && >>> - code < table.id[mid - 1].code) >>> - break; >>> - else if (code < table.id[mid].code) >>> - low = mid + 1; >>> - else >>> - high = mid - 1; >>> - mid = (low + high) / 2; >>> + while (low <= high) { >>> + if (code >= table.id[mid].code && >>> + code < table.id[mid - 1].code) >>> + break; >>> + else if (code < table.id[mid].code) >>> + low = mid + 1; >>> + else >>> + high = mid - 1; >>> + >>> + mid = (low + high) / 2; >>> + } >>> + break; >>> + case ADC_INCREMENT: >>> + code &= table.data_mask; >>> + if (code < table.id[low].code) >>> + return -EAGAIN; /* Incorrect reading */ >>> + >> add an indentation. > > Ditto. > > Thanks, > Caesar >> >>> + while (low <= high) { >>> + if (code >= table.id[mid - 1].code && >>> + code < table.id[mid].code) >>> + break; >>> + else if (code > table.id[mid].code) >>> + low = mid + 1; >>> + else >>> + high = mid - 1; >>> + >>> + mid = (low + high) / 2; >>> + } >>> + break; >>> + default: >>> + pr_err("Invalid the table conversion\n"); >>> } >>> /* >>> @@ -245,8 +282,8 @@ static int rk_tsadcv2_code_to_temp(struct >>> chip_tsadc_table table, u32 code, >>> * to produce less granular result. >>> */ >>> num = table.id[mid].temp - v2_code_table[mid - 1].temp; >>> - num *= table.id[mid - 1].code - code; >>> - denom = table.id[mid - 1].code - table.id[mid].code; >>> + num *= abs(table.id[mid - 1].code - code); >>> + denom = abs(table.id[mid - 1].code - table.id[mid].code); >>> *temp = table.id[mid - 1].temp + (num / denom); >>> return 0; >>> @@ -367,6 +404,7 @@ static const struct rockchip_tsadc_chip >>> rk3288_tsadc_data = { >>> .id = v2_code_table, >>> .length = ARRAY_SIZE(v2_code_table), >>> .data_mask = TSADCV2_DATA_MASK, >>> + .flag = ADC_DECREMENT, >>> }, >>> }; >>> -- >>> 1.9.1 >>> >> _______________________________________________ >> linux-arm-kernel mailing list >> linux-arm-kernel@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > >
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index e828f18..9df027f 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -53,6 +53,16 @@ enum sensor_id { }; /** +* The conversion table has the adc value and temperature. +* ADC_DECREMENT is the adc value decremnet.(e.g. v2_code_table) +* ADC_INCREMNET is the adc value incremnet.(e.g. v3_code_table) +*/ +enum adc_flag { + ADC_DECREMENT = 0, + ADC_INCREMENT, +}; + +/** * The max sensors is two in rockchip SoCs. * Two sensors: CPU and GPU sensor. */ @@ -66,6 +76,9 @@ struct chip_tsadc_table { /* that analogic mask data */ unsigned long data_mask; + + /* adc value is increment or decrement */ + unsigned int flag; }; struct rockchip_tsadc_chip { @@ -223,19 +236,43 @@ static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code, WARN_ON(table.length < 2); - code &= table.data_mask; - if (code < table.id[high].code) + switch (table.flag) { + case ADC_DECREMENT: + code &= table.data_mask; + if (code < table.id[high].code) return -EAGAIN; /* Incorrect reading */ - while (low <= high) { - if (code >= table.id[mid].code && - code < table.id[mid - 1].code) - break; - else if (code < table.id[mid].code) - low = mid + 1; - else - high = mid - 1; - mid = (low + high) / 2; + while (low <= high) { + if (code >= table.id[mid].code && + code < table.id[mid - 1].code) + break; + else if (code < table.id[mid].code) + low = mid + 1; + else + high = mid - 1; + + mid = (low + high) / 2; + } + break; + case ADC_INCREMENT: + code &= table.data_mask; + if (code < table.id[low].code) + return -EAGAIN; /* Incorrect reading */ + + while (low <= high) { + if (code >= table.id[mid - 1].code && + code < table.id[mid].code) + break; + else if (code > table.id[mid].code) + low = mid + 1; + else + high = mid - 1; + + mid = (low + high) / 2; + } + break; + default: + pr_err("Invalid the table conversion\n"); } /* @@ -245,8 +282,8 @@ static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code, * to produce less granular result. */ num = table.id[mid].temp - v2_code_table[mid - 1].temp; - num *= table.id[mid - 1].code - code; - denom = table.id[mid - 1].code - table.id[mid].code; + num *= abs(table.id[mid - 1].code - code); + denom = abs(table.id[mid - 1].code - table.id[mid].code); *temp = table.id[mid - 1].temp + (num / denom); return 0; @@ -367,6 +404,7 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = { .id = v2_code_table, .length = ARRAY_SIZE(v2_code_table), .data_mask = TSADCV2_DATA_MASK, + .flag = ADC_DECREMENT, }, };
The conversion table has the adc value and temperature. In fact, the adc value only has the increment or decrement mode in conversion table. Moment, we can add the flag to be better support the *code_to_temp* for differenr SoCs. Signed-off-by: Caesar Wang <wxt@rock-chips.com> --- Changes in v2: None Changes in v1: None drivers/thermal/rockchip_thermal.c | 64 ++++++++++++++++++++++++++++++-------- 1 file changed, 51 insertions(+), 13 deletions(-)