Message ID | 1447032799-13155-3-git-send-email-horms+renesas@verge.net.au (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi Simon, On Monday 09 November 2015 10:33:19 Simon Horman wrote: > Configure PFC for the already enabled scif and ethernet devices > in the device tree for the gose board. > > Based on similar work for the koelsch board by Laurent Pinchart and > Sergei Shtylyov. I can't really comment on the patch due to lack of a schematics for the Goose board, but it looks good to me in principle. Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au> > --- > arch/arm/boot/dts/r8a7793-gose.dts | 31 +++++++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/arch/arm/boot/dts/r8a7793-gose.dts > b/arch/arm/boot/dts/r8a7793-gose.dts index 96443ec5f6ab..1575ef759047 > 100644 > --- a/arch/arm/boot/dts/r8a7793-gose.dts > +++ b/arch/arm/boot/dts/r8a7793-gose.dts > @@ -37,7 +37,32 @@ > clock-frequency = <20000000>; > }; > > +&pfc { > + scif0_pins: serial0 { > + renesas,groups = "scif0_data_d"; > + renesas,function = "scif0"; > + }; > + > + scif1_pins: serial1 { > + renesas,groups = "scif1_data_d"; > + renesas,function = "scif1"; > + }; > + > + ether_pins: ether { > + renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; > + renesas,function = "eth"; > + }; > + > + phy1_pins: phy1 { > + renesas,groups = "intc_irq0"; > + renesas,function = "intc"; > + }; > +}; > + > ðer { > + pinctrl-0 = <ðer_pins &phy1_pins>; > + pinctrl-names = "default"; > + > phy-handle = <&phy1>; > renesas,ether-link-active-low; > status = "okay"; > @@ -55,9 +80,15 @@ > }; > > &scif0 { > + pinctrl-0 = <&scif0_pins>; > + pinctrl-names = "default"; > + > status = "okay"; > }; > > &scif1 { > + pinctrl-0 = <&scif1_pins>; > + pinctrl-names = "default"; > + > status = "okay"; > };
On Mon, Nov 09, 2015 at 04:16:45PM +0200, Laurent Pinchart wrote: > Hi Simon, > > On Monday 09 November 2015 10:33:19 Simon Horman wrote: > > Configure PFC for the already enabled scif and ethernet devices > > in the device tree for the gose board. > > > > Based on similar work for the koelsch board by Laurent Pinchart and > > Sergei Shtylyov. > > I can't really comment on the patch due to lack of a schematics for the Goose > board, but it looks good to me in principle. > > Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Thanks, I have queued up both patches of this series.
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 96443ec5f6ab..1575ef759047 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -37,7 +37,32 @@ clock-frequency = <20000000>; }; +&pfc { + scif0_pins: serial0 { + renesas,groups = "scif0_data_d"; + renesas,function = "scif0"; + }; + + scif1_pins: serial1 { + renesas,groups = "scif1_data_d"; + renesas,function = "scif1"; + }; + + ether_pins: ether { + renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; + renesas,function = "eth"; + }; + + phy1_pins: phy1 { + renesas,groups = "intc_irq0"; + renesas,function = "intc"; + }; +}; + ðer { + pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-names = "default"; + phy-handle = <&phy1>; renesas,ether-link-active-low; status = "okay"; @@ -55,9 +80,15 @@ }; &scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; }; &scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + status = "okay"; };
Configure PFC for the already enabled scif and ethernet devices in the device tree for the gose board. Based on similar work for the koelsch board by Laurent Pinchart and Sergei Shtylyov. Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- arch/arm/boot/dts/r8a7793-gose.dts | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)