@@ -755,6 +755,7 @@ static void cdns_uart_set_termios(struct uart_port *port,
*/
static int cdns_uart_startup(struct uart_port *port)
{
+ unsigned long flags;
unsigned int retval = 0, status = 0;
retval = request_irq(port->irq, cdns_uart_isr, 0, CDNS_UART_NAME,
@@ -762,6 +763,8 @@ static int cdns_uart_startup(struct uart_port *port)
if (retval)
return retval;
+ spin_lock_irqsave(&port->lock, flags);
+
/* Disable the TX and RX */
writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
port->membase + CDNS_UART_CR_OFFSET);
@@ -772,15 +775,14 @@ static int cdns_uart_startup(struct uart_port *port)
writel(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST,
port->membase + CDNS_UART_CR_OFFSET);
- status = readl(port->membase + CDNS_UART_CR_OFFSET);
-
- /* Clear the RX disable and TX disable bits and then set the TX enable
- * bit and RX enable bit to enable the transmitter and receiver.
+ /*
+ * Clear the RX disable bit and then set the RX enable bit to enable
+ * the receiver.
*/
- writel((status & ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS))
- | (CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN |
- CDNS_UART_CR_STOPBRK),
- port->membase + CDNS_UART_CR_OFFSET);
+ status = readl(port->membase + CDNS_UART_CR_OFFSET);
+ status &= CDNS_UART_CR_RX_DIS;
+ status |= CDNS_UART_CR_RX_EN;
+ writel(status, port->membase + CDNS_UART_CR_OFFSET);
/* Set the Mode Register with normal mode,8 data bits,1 stop bit,
* no parity.
@@ -811,6 +813,8 @@ static int cdns_uart_startup(struct uart_port *port)
CDNS_UART_IXR_RXTRIG | CDNS_UART_IXR_TOUT,
port->membase + CDNS_UART_IER_OFFSET);
+ spin_unlock_irqrestore(&port->lock, flags);
+
return retval;
}
The startup function is supposed to initialize the UART for receiving. Hence, don't enable the TX part. Also, protect HW accesses with the port lock. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> --- drivers/tty/serial/xilinx_uartps.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-)