| Message ID | 1448027950-14629-3-git-send-email-hdegoede@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Nov 20, 2015 at 9:59 PM, Hans de Goede <hdegoede@redhat.com> wrote: > Add a node describing the lcd panel backlight on the pov protab2 ips9 > tablet. > > Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
On Fri, Nov 20, 2015 at 02:59:09PM +0100, Hans de Goede wrote: > Add a node describing the lcd panel backlight on the pov protab2 ips9 > tablet. > > Signed-off-by: Hans de Goede <hdegoede@redhat.com> Fixed the conflict and applied. Thanks, Maxime > --- > arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts | 24 ++++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > > diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts > index 0e5124f..1f92ec7 100644 > --- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts > +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts > @@ -47,6 +47,7 @@ > #include <dt-bindings/input/input.h> > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/pinctrl/sun4i-a10.h> > +#include <dt-bindings/pwm/pwm.h> > > / { > model = "Point of View Protab2-IPS9"; > @@ -56,6 +57,16 @@ > serial0 = &uart0; > }; > > + backlight: backlight { > + compatible = "pwm-backlight"; > + pinctrl-names = "default"; > + pinctrl-0 = <&bl_en_pin_protab>; > + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; > + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; > + default-brightness-level = <8>; > + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ > + }; > + > chosen { > stdout-path = "serial0:115200n8"; > }; > @@ -145,6 +156,13 @@ > }; > > &pio { > + bl_en_pin_protab: bl_en_pin@0 { > + allwinner,pins = "PH7"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + > touchscreen_pins: touchscreen_pins@0 { > allwinner,pins = "PA5", "PB13"; > allwinner,function = "gpio_out"; > @@ -167,6 +185,12 @@ > }; > }; > > +&pwm { > + pinctrl-names = "default"; > + pinctrl-0 = <&pwm0_pins_a>; > + status = "okay"; > +}; > + > ®_dcdc2 { > regulator-always-on; > regulator-min-microvolt = <1000000>; > -- > 2.5.0 >
diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts index 0e5124f..1f92ec7 100644 --- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts @@ -47,6 +47,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/pwm/pwm.h> / { model = "Point of View Protab2-IPS9"; @@ -56,6 +57,16 @@ serial0 = &uart0; }; + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en_pin_protab>; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -145,6 +156,13 @@ }; &pio { + bl_en_pin_protab: bl_en_pin@0 { + allwinner,pins = "PH7"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + touchscreen_pins: touchscreen_pins@0 { allwinner,pins = "PA5", "PB13"; allwinner,function = "gpio_out"; @@ -167,6 +185,12 @@ }; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>; + status = "okay"; +}; + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>;
Add a node describing the lcd panel backlight on the pov protab2 ips9 tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)