@@ -77,7 +77,8 @@
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
- MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
devbus-bootcs {
status = "okay";
@@ -181,21 +182,33 @@
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
};
ethernet@74000 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <1>;
};
ethernet@30000 {
status = "okay";
phy = <&phy2>;
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
};
ethernet@34000 {
status = "okay";
phy = <&phy3>;
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <3>;
+ };
+
+ bm@c0000 {
+ status = "okay";
};
mvsdio@d4000 {
@@ -230,5 +243,9 @@
};
};
};
+
+ bm-bppi {
+ status = "okay";
+ };
};
};
@@ -96,7 +96,8 @@
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
- MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
devbus-bootcs {
status = "okay";
@@ -196,21 +197,29 @@
status = "okay";
phy = <&phy0>;
phy-mode = "qsgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
};
ethernet@74000 {
status = "okay";
phy = <&phy1>;
phy-mode = "qsgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <1>;
};
ethernet@30000 {
status = "okay";
phy = <&phy2>;
phy-mode = "qsgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
};
ethernet@34000 {
status = "okay";
phy = <&phy3>;
phy-mode = "qsgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <3>;
};
/* Front-side USB slot */
@@ -235,6 +244,10 @@
};
};
+ bm@c0000 {
+ status = "okay";
+ };
+
nand@d0000 {
status = "okay";
num-cs = <1>;
@@ -243,5 +256,9 @@
nand-on-flash-bbt;
};
};
+
+ bm-bppi {
+ status = "okay";
+ };
};
};
Since mvneta driver supports using hardware buffer management (BM), in order to use it, board files have to be adjusted accordingly. This commit enables BM on AXP-DB and AXP-GP in same manner - because number of ports on those boards is the same as number of possible pools, each port is supposed to use single pool for all kind of packets. Moreover appropriate entry is added to 'soc' node ranges, as well as "okay" status for 'bm' and 'bm-bppi' (internal SRAM) nodes. Signed-off-by: Marcin Wojtas <mw@semihalf.com> --- arch/arm/boot/dts/armada-xp-db.dts | 19 ++++++++++++++++++- arch/arm/boot/dts/armada-xp-gp.dts | 19 ++++++++++++++++++- 2 files changed, 36 insertions(+), 2 deletions(-)