@@ -176,6 +176,11 @@ static void hns_ppe_cnt_clr_ce(struct hns_ppe_cb *ppe_cb)
PPE_CNT_CLR_CE_B, 1);
}
+static void hns_ppe_set_vlan_strip(struct hns_ppe_cb *ppe_cb, int en)
+{
+ dsaf_write_dev(ppe_cb, PPEV2_VLAN_STRIP_EN_REG, en);
+}
+
/**
* hns_ppe_checksum_hw - set ppe checksum caculate
* @ppe_device: ppe device
@@ -336,6 +341,8 @@ static void hns_ppe_init_hw(struct hns_ppe_cb *ppe_cb)
hns_ppe_cnt_clr_ce(ppe_cb);
if (!AE_IS_VER1(dsaf_dev->dsaf_ver)) {
+ hns_ppe_set_vlan_strip(ppe_cb, 0);
+
/* set default RSS key in h/w */
hns_ppe_set_rss_key(ppe_cb, ppe_cb->rss_key);
@@ -49,56 +49,56 @@
#define DSAF_TCAM_SUM 512
#define DSAF_LINE_SUM (2048 * 14)
-#define DSAF_SUB_SC_NT_SRAM_CLK_SEL_REG 0x100
-#define DSAF_SUB_SC_HILINK3_CRG_CTRL0_REG 0x180
-#define DSAF_SUB_SC_HILINK3_CRG_CTRL1_REG 0x184
-#define DSAF_SUB_SC_HILINK3_CRG_CTRL2_REG 0x188
-#define DSAF_SUB_SC_HILINK3_CRG_CTRL3_REG 0x18C
-#define DSAF_SUB_SC_HILINK4_CRG_CTRL0_REG 0x190
-#define DSAF_SUB_SC_HILINK4_CRG_CTRL1_REG 0x194
-#define DSAF_SUB_SC_DSAF_CLK_EN_REG 0x300
-#define DSAF_SUB_SC_DSAF_CLK_DIS_REG 0x304
-#define DSAF_SUB_SC_NT_CLK_EN_REG 0x308
-#define DSAF_SUB_SC_NT_CLK_DIS_REG 0x30C
-#define DSAF_SUB_SC_XGE_CLK_EN_REG 0x310
-#define DSAF_SUB_SC_XGE_CLK_DIS_REG 0x314
-#define DSAF_SUB_SC_GE_CLK_EN_REG 0x318
-#define DSAF_SUB_SC_GE_CLK_DIS_REG 0x31C
-#define DSAF_SUB_SC_PPE_CLK_EN_REG 0x320
-#define DSAF_SUB_SC_PPE_CLK_DIS_REG 0x324
-#define DSAF_SUB_SC_RCB_PPE_COM_CLK_EN_REG 0x350
-#define DSAF_SUB_SC_RCB_PPE_COM_CLK_DIS_REG 0x354
-#define DSAF_SUB_SC_XBAR_RESET_REQ_REG 0xA00
-#define DSAF_SUB_SC_XBAR_RESET_DREQ_REG 0xA04
-#define DSAF_SUB_SC_NT_RESET_REQ_REG 0xA08
-#define DSAF_SUB_SC_NT_RESET_DREQ_REG 0xA0C
-#define DSAF_SUB_SC_XGE_RESET_REQ_REG 0xA10
-#define DSAF_SUB_SC_XGE_RESET_DREQ_REG 0xA14
-#define DSAF_SUB_SC_GE_RESET_REQ0_REG 0xA18
-#define DSAF_SUB_SC_GE_RESET_DREQ0_REG 0xA1C
-#define DSAF_SUB_SC_GE_RESET_REQ1_REG 0xA20
-#define DSAF_SUB_SC_GE_RESET_DREQ1_REG 0xA24
-#define DSAF_SUB_SC_PPE_RESET_REQ_REG 0xA48
-#define DSAF_SUB_SC_PPE_RESET_DREQ_REG 0xA4C
-#define DSAF_SUB_SC_RCB_PPE_COM_RESET_REQ_REG 0xA88
-#define DSAF_SUB_SC_RCB_PPE_COM_RESET_DREQ_REG 0xA8C
-#define DSAF_SUB_SC_LIGHT_MODULE_DETECT_EN_REG 0x2060
-#define DSAF_SUB_SC_TCAM_MBIST_EN_REG 0x2300
-#define DSAF_SUB_SC_DSAF_CLK_ST_REG 0x5300
-#define DSAF_SUB_SC_NT_CLK_ST_REG 0x5304
-#define DSAF_SUB_SC_XGE_CLK_ST_REG 0x5308
-#define DSAF_SUB_SC_GE_CLK_ST_REG 0x530C
-#define DSAF_SUB_SC_PPE_CLK_ST_REG 0x5310
-#define DSAF_SUB_SC_ROCEE_CLK_ST_REG 0x5314
-#define DSAF_SUB_SC_CPU_CLK_ST_REG 0x5318
-#define DSAF_SUB_SC_RCB_PPE_COM_CLK_ST_REG 0x5328
-#define DSAF_SUB_SC_XBAR_RESET_ST_REG 0x5A00
-#define DSAF_SUB_SC_NT_RESET_ST_REG 0x5A04
-#define DSAF_SUB_SC_XGE_RESET_ST_REG 0x5A08
-#define DSAF_SUB_SC_GE_RESET_ST0_REG 0x5A0C
-#define DSAF_SUB_SC_GE_RESET_ST1_REG 0x5A10
-#define DSAF_SUB_SC_PPE_RESET_ST_REG 0x5A24
-#define DSAF_SUB_SC_RCB_PPE_COM_RESET_ST_REG 0x5A44
+#define DSAF_SUB_SC_NT_SRAM_CLK_SEL_REG 0x100
+#define DSAF_SUB_SC_HILINK3_CRG_CTRL0_REG 0x180
+#define DSAF_SUB_SC_HILINK3_CRG_CTRL1_REG 0x184
+#define DSAF_SUB_SC_HILINK3_CRG_CTRL2_REG 0x188
+#define DSAF_SUB_SC_HILINK3_CRG_CTRL3_REG 0x18C
+#define DSAF_SUB_SC_HILINK4_CRG_CTRL0_REG 0x190
+#define DSAF_SUB_SC_HILINK4_CRG_CTRL1_REG 0x194
+#define DSAF_SUB_SC_DSAF_CLK_EN_REG 0x300
+#define DSAF_SUB_SC_DSAF_CLK_DIS_REG 0x304
+#define DSAF_SUB_SC_NT_CLK_EN_REG 0x308
+#define DSAF_SUB_SC_NT_CLK_DIS_REG 0x30C
+#define DSAF_SUB_SC_XGE_CLK_EN_REG 0x310
+#define DSAF_SUB_SC_XGE_CLK_DIS_REG 0x314
+#define DSAF_SUB_SC_GE_CLK_EN_REG 0x318
+#define DSAF_SUB_SC_GE_CLK_DIS_REG 0x31C
+#define DSAF_SUB_SC_PPE_CLK_EN_REG 0x320
+#define DSAF_SUB_SC_PPE_CLK_DIS_REG 0x324
+#define DSAF_SUB_SC_RCB_PPE_COM_CLK_EN_REG 0x350
+#define DSAF_SUB_SC_RCB_PPE_COM_CLK_DIS_REG 0x354
+#define DSAF_SUB_SC_XBAR_RESET_REQ_REG 0xA00
+#define DSAF_SUB_SC_XBAR_RESET_DREQ_REG 0xA04
+#define DSAF_SUB_SC_NT_RESET_REQ_REG 0xA08
+#define DSAF_SUB_SC_NT_RESET_DREQ_REG 0xA0C
+#define DSAF_SUB_SC_XGE_RESET_REQ_REG 0xA10
+#define DSAF_SUB_SC_XGE_RESET_DREQ_REG 0xA14
+#define DSAF_SUB_SC_GE_RESET_REQ0_REG 0xA18
+#define DSAF_SUB_SC_GE_RESET_DREQ0_REG 0xA1C
+#define DSAF_SUB_SC_GE_RESET_REQ1_REG 0xA20
+#define DSAF_SUB_SC_GE_RESET_DREQ1_REG 0xA24
+#define DSAF_SUB_SC_PPE_RESET_REQ_REG 0xA48
+#define DSAF_SUB_SC_PPE_RESET_DREQ_REG 0xA4C
+#define DSAF_SUB_SC_RCB_PPE_COM_RESET_REQ_REG 0xA88
+#define DSAF_SUB_SC_RCB_PPE_COM_RESET_DREQ_REG 0xA8C
+#define DSAF_SUB_SC_LIGHT_MODULE_DETECT_EN_REG 0x2060
+#define DSAF_SUB_SC_TCAM_MBIST_EN_REG 0x2300
+#define DSAF_SUB_SC_DSAF_CLK_ST_REG 0x5300
+#define DSAF_SUB_SC_NT_CLK_ST_REG 0x5304
+#define DSAF_SUB_SC_XGE_CLK_ST_REG 0x5308
+#define DSAF_SUB_SC_GE_CLK_ST_REG 0x530C
+#define DSAF_SUB_SC_PPE_CLK_ST_REG 0x5310
+#define DSAF_SUB_SC_ROCEE_CLK_ST_REG 0x5314
+#define DSAF_SUB_SC_CPU_CLK_ST_REG 0x5318
+#define DSAF_SUB_SC_RCB_PPE_COM_CLK_ST_REG 0x5328
+#define DSAF_SUB_SC_XBAR_RESET_ST_REG 0x5A00
+#define DSAF_SUB_SC_NT_RESET_ST_REG 0x5A04
+#define DSAF_SUB_SC_XGE_RESET_ST_REG 0x5A08
+#define DSAF_SUB_SC_GE_RESET_ST0_REG 0x5A0C
+#define DSAF_SUB_SC_GE_RESET_ST1_REG 0x5A10
+#define DSAF_SUB_SC_PPE_RESET_ST_REG 0x5A24
+#define DSAF_SUB_SC_RCB_PPE_COM_RESET_ST_REG 0x5A44
/*serdes offset**/
#define HNS_MAC_HILINK3_REG DSAF_SUB_SC_HILINK3_CRG_CTRL0_REG
@@ -317,7 +317,8 @@
#define PPE_CFG_TAG_GEN_REG 0x90
#define PPE_CFG_PARSE_TAG_REG 0x94
#define PPE_CFG_PRO_CHECK_EN_REG 0x98
-#define PPEV2_CFG_TSO_EN_REG 0xA0
+#define PPEV2_CFG_TSO_EN_REG 0xA0
+#define PPEV2_VLAN_STRIP_EN_REG 0xAC
#define PPE_INTEN_REG 0x100
#define PPE_RINT_REG 0x104
#define PPE_INTSTS_REG 0x108
This patch adds the initializzation code to disable the hardware vlan support for VLAN Tag stripping by default for now. Proper support of "hardware VLAN assitance" feature would soon come in the next coming patches. Signed-off-by: Salil Mehta <salil.mehta@huawei.com> --- PATCH V7: - This addresses the comment provided by Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> related to the missing TABs and formating. Further, some more corrections related to missing TABs has been made in the same file. Link: https://lkml.org/lkml/2015/12/2/868 PATCH V6: - No change over the earlier patch PATCH V5: - Minor merge/reject change resolved to application of previous patch PATCH V4/V3/V2: - No change over the initial floated patch PATCH V1: - Initial code to disable the hardware VLAN assist for now --- drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c | 7 ++ drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h | 103 +++++++++++---------- 2 files changed, 59 insertions(+), 51 deletions(-)