diff mbox

[PATCHv2] ARM: dts: kirkwood: Add DTS for Zyxel NSA325

Message ID 1449725588-9438-1-git-send-email-ulli.kroll@googlemail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Hans Ulli Kroll Dec. 10, 2015, 5:33 a.m. UTC
Add a new DTS file to support the Zyxel NSA325(v2) dual bay
NAS device, based on the NSA320 DTS files.

The only difference to the NSA320 device is GPIO47.
This en/disables the power for the hdd in slot2, currently
fixed to on.

Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
---

v2
- using kirkwood-nsa325.dts as template, this removes the odd 
  indentation and unneeded partitions nodes.

 arch/arm/boot/dts/Makefile            |   1 +
 arch/arm/boot/dts/kirkwood-nsa325.dts | 236 ++++++++++++++++++++++++++++++++++
 2 files changed, 237 insertions(+)
 create mode 100644 arch/arm/boot/dts/kirkwood-nsa325.dts

Comments

Andrew Lunn Dec. 10, 2015, 4:04 p.m. UTC | #1
On Thu, Dec 10, 2015 at 06:33:08AM +0100, Hans Ulli Kroll wrote:
> Add a new DTS file to support the Zyxel NSA325(v2) dual bay
> NAS device, based on the NSA320 DTS files.
> 
> The only difference to the NSA320 device is GPIO47.
> This en/disables the power for the hdd in slot2, currently
> fixed to on.
> 
> Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>

Looks good. Thanks

Acked-by: Andrew Lunn <andrew@lunn.ch>

	  Andrew

> ---
> 
> v2
> - using kirkwood-nsa325.dts as template, this removes the odd 
>   indentation and unneeded partitions nodes.
> 
>  arch/arm/boot/dts/Makefile            |   1 +
>  arch/arm/boot/dts/kirkwood-nsa325.dts | 236 ++++++++++++++++++++++++++++++++++
>  2 files changed, 237 insertions(+)
>  create mode 100644 arch/arm/boot/dts/kirkwood-nsa325.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index bb8fa02..0fcae90 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -193,6 +193,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
>  	kirkwood-ns2mini.dtb \
>  	kirkwood-nsa310.dtb \
>  	kirkwood-nsa310a.dtb \
> +	kirkwood-nsa325.dtb \
>  	kirkwood-openblocks_a6.dtb \
>  	kirkwood-openblocks_a7.dtb \
>  	kirkwood-openrd-base.dtb \
> diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/kirkwood-nsa325.dts
> new file mode 100644
> index 0000000..6e9ffb5
> --- /dev/null
> +++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
> @@ -0,0 +1,236 @@
> +/* Device tree file for the Zyxel NSA 325 NAS box.
> + *
> + * Copyright (c) 2015, Hans Ulli Kroll <ulli.kroll@googlemail.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + *
> + * Based upon the board setup file created by Peter Schildmann */
> +
> +/dts-v1/;
> +
> +#include "kirkwood-nsa3x0-common.dtsi"
> +
> +/ {
> +	model = "ZyXEL NSA325";
> +	compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x00000000 0x20000000>;
> +	};
> +
> +	chosen {
> +		bootargs = "console=ttyS0,115200";
> +		stdout-path = &uart0;
> +	};
> +
> +	mbus {
> +		pcie-controller {
> +			status = "okay";
> +
> +			pcie@1,0 {
> +				status = "okay";
> +			};
> +		};
> +	};
> +
> +	ocp@f1000000 {
> +		pinctrl: pin-controller@10000 {
> +			pinctrl-names = "default";
> +
> +			pmx_led_hdd2_green: pmx-led-hdd2-green {
> +				marvell,pins = "mpp12";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_led_hdd2_red: pmx-led-hdd2-red {
> +				marvell,pins = "mpp13";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_mcu_data: pmx-mcu-data {
> +				marvell,pins = "mpp14";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_led_usb_green: pmx-led-usb-green {
> +				marvell,pins = "mpp15";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_mcu_clk: pmx-mcu-clk {
> +				marvell,pins = "mpp16";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_mcu_act: pmx-mcu-act {
> +				marvell,pins = "mpp17";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_led_sys_green: pmx-led-sys-green {
> +				marvell,pins = "mpp28";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_led_sys_orange: pmx-led-sys-orange {
> +				marvell,pins = "mpp29";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_led_hdd1_green: pmx-led-hdd1-green {
> +				marvell,pins = "mpp41";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_led_hdd1_red: pmx-led-hdd1-red {
> +				marvell,pins = "mpp42";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_htp: pmx-htp {
> +				marvell,pins = "mpp43";
> +				marvell,function = "gpio";
> +			};
> +
> +			/* Buzzer needs to be switched at around 1kHz so is
> +			   not compatible with the gpio-beeper driver. */
> +			pmx_buzzer: pmx-buzzer {
> +				marvell,pins = "mpp44";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_vid_b1: pmx-vid-b1 {
> +				marvell,pins = "mpp45";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_power_resume_data: pmx-power-resume-data {
> +				marvell,pins = "mpp47";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_power_resume_clk: pmx-power-resume-clk {
> +				marvell,pins = "mpp49";
> +				marvell,function = "gpio";
> +			};
> +
> +			pmx_pwr_sata1: pmx-pwr-sata1 {
> +				marvell,pins = "mpp47";
> +				marvell,function = "gpio";
> +			};
> +		};
> +
> +		/* This board uses the pcf8563 RTC instead of the SoC RTC */
> +		rtc@10300 {
> +			status = "disabled";
> +		};
> +
> +		i2c@11000 {
> +			status = "okay";
> +
> +			pcf8563: pcf8563@51 {
> +				compatible = "nxp,pcf8563";
> +				reg = <0x51>;
> +			};
> +		};
> +	};
> +
> +	regulators {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		pinctrl-0 = <&pmx_pwr_sata1>;
> +		pinctrl-names = "default";
> +
> +		usb0_power: regulator@1 {
> +			enable-active-high;
> +		};
> +
> +		sata1_power: regulator@2 {
> +			compatible = "regulator-fixed";
> +			reg = <2>;
> +			regulator-name = "SATA1 Power";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			regulator-always-on;
> +			regulator-boot-on;
> +			enable-active-high;
> +			gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
> +		};
> +	};
> +
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
> +			     &pmx_led_usb_green
> +			     &pmx_led_sys_green &pmx_led_sys_orange
> +			     &pmx_led_copy_green &pmx_led_copy_red
> +			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
> +		pinctrl-names = "default";
> +
> +		green-sys {
> +			label = "nsa325:green:sys";
> +			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
> +		};
> +		orange-sys {
> +			label = "nsa325:orange:sys";
> +			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
> +		};
> +		green-hdd1 {
> +			label = "nsa325:green:hdd1";
> +			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
> +		};
> +		red-hdd1 {
> +			label = "nsa325:red:hdd1";
> +			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
> +		};
> +		green-hdd2 {
> +			label = "nsa325:green:hdd2";
> +			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
> +		};
> +		red-hdd2 {
> +			label = "nsa325:red:hdd2";
> +			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
> +		};
> +		green-usb {
> +			label = "nsa325:green:usb";
> +			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
> +		};
> +		green-copy {
> +			label = "nsa325:green:copy";
> +			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
> +		};
> +		red-copy {
> +			label = "nsa325:red:copy";
> +			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +	/* The following pins are currently not assigned to a driver,
> +	   some of them should be configured as inputs.
> +	pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
> +		     &pmx_htp &pmx_vid_b1
> +		     &pmx_power_resume_data &pmx_power_resume_clk>; */
> +		
> +	};
> +
> +
> +};
> +
> +&mdio {
> +	status = "okay";
> +	ethphy0: ethernet-phy@1 {
> +		reg = <1>;
> +	};
> +};
> +
> +&eth0 {
> +	status = "okay";
> +	ethernet0-port@0 {
> +		phy-handle = <&ethphy0>;
> +	};
> +};
> +
> -- 
> 2.6.0
>
Gregory CLEMENT Dec. 15, 2015, 4:15 p.m. UTC | #2
Hi Hans,
 
 On jeu., déc. 10 2015, Andrew Lunn <andrew@lunn.ch> wrote:

> On Thu, Dec 10, 2015 at 06:33:08AM +0100, Hans Ulli Kroll wrote:
>> Add a new DTS file to support the Zyxel NSA325(v2) dual bay
>> NAS device, based on the NSA320 DTS files.
>> 
>> The only difference to the NSA320 device is GPIO47.
>> This en/disables the power for the hdd in slot2, currently
>> fixed to on.
>> 
>> Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
>
> Looks good. Thanks
>
> Acked-by: Andrew Lunn <andrew@lunn.ch>

Applied on mvebu/dt with Andrew's acked-by and minor fix on comment
format.

Thanks,

Gregory
>
> 	  Andrew
>
>> ---
>> 
>> v2
>> - using kirkwood-nsa325.dts as template, this removes the odd 
>>   indentation and unneeded partitions nodes.
>> 
>>  arch/arm/boot/dts/Makefile            |   1 +
>>  arch/arm/boot/dts/kirkwood-nsa325.dts | 236 ++++++++++++++++++++++++++++++++++
>>  2 files changed, 237 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/kirkwood-nsa325.dts
>> 
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index bb8fa02..0fcae90 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -193,6 +193,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
>>  	kirkwood-ns2mini.dtb \
>>  	kirkwood-nsa310.dtb \
>>  	kirkwood-nsa310a.dtb \
>> +	kirkwood-nsa325.dtb \
>>  	kirkwood-openblocks_a6.dtb \
>>  	kirkwood-openblocks_a7.dtb \
>>  	kirkwood-openrd-base.dtb \
>> diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/kirkwood-nsa325.dts
>> new file mode 100644
>> index 0000000..6e9ffb5
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
>> @@ -0,0 +1,236 @@
>> +/* Device tree file for the Zyxel NSA 325 NAS box.
>> + *
>> + * Copyright (c) 2015, Hans Ulli Kroll <ulli.kroll@googlemail.com>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>> + * as published by the Free Software Foundation; either version
>> + * 2 of the License, or (at your option) any later version.
>> + *
>> + * Based upon the board setup file created by Peter Schildmann */
>> +
>> +/dts-v1/;
>> +
>> +#include "kirkwood-nsa3x0-common.dtsi"
>> +
>> +/ {
>> +	model = "ZyXEL NSA325";
>> +	compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
>> +
>> +	memory {
>> +		device_type = "memory";
>> +		reg = <0x00000000 0x20000000>;
>> +	};
>> +
>> +	chosen {
>> +		bootargs = "console=ttyS0,115200";
>> +		stdout-path = &uart0;
>> +	};
>> +
>> +	mbus {
>> +		pcie-controller {
>> +			status = "okay";
>> +
>> +			pcie@1,0 {
>> +				status = "okay";
>> +			};
>> +		};
>> +	};
>> +
>> +	ocp@f1000000 {
>> +		pinctrl: pin-controller@10000 {
>> +			pinctrl-names = "default";
>> +
>> +			pmx_led_hdd2_green: pmx-led-hdd2-green {
>> +				marvell,pins = "mpp12";
>> +				marvell,function = "gpio";
>> +			};
>> +
>> +			pmx_led_hdd2_red: pmx-led-hdd2-red {
>> +				marvell,pins = "mpp13";
>> +				marvell,function = "gpio";
>> +			};
>> +
>> +			pmx_mcu_data: pmx-mcu-data {
>> +				marvell,pins = "mpp14";
>> +				marvell,function = "gpio";
>> +			};
>> +
>> +			pmx_led_usb_green: pmx-led-usb-green {
>> +				marvell,pins = "mpp15";
>> +				marvell,function = "gpio";
>> +			};
>> +
>> +			pmx_mcu_clk: pmx-mcu-clk {
>> +				marvell,pins = "mpp16";
>> +				marvell,function = "gpio";
>> +			};
>> +
>> +			pmx_mcu_act: pmx-mcu-act {
>> +				marvell,pins = "mpp17";
>> +				marvell,function = "gpio";
>> +			};
>> +
>> +			pmx_led_sys_green: pmx-led-sys-green {
>> +				marvell,pins = "mpp28";
>> +				marvell,function = "gpio";
>> +			};
>> +
>> +			pmx_led_sys_orange: pmx-led-sys-orange {
>> +				marvell,pins = "mpp29";
>> +				marvell,function = "gpio";
>> +			};
>> +
>> +			pmx_led_hdd1_green: pmx-led-hdd1-green {
>> +				marvell,pins = "mpp41";
>> +				marvell,function = "gpio";
>> +			};
>> +
>> +			pmx_led_hdd1_red: pmx-led-hdd1-red {
>> +				marvell,pins = "mpp42";
>> +				marvell,function = "gpio";
>> +			};
>> +
>> +			pmx_htp: pmx-htp {
>> +				marvell,pins = "mpp43";
>> +				marvell,function = "gpio";
>> +			};
>> +
>> +			/* Buzzer needs to be switched at around 1kHz so is
>> +			   not compatible with the gpio-beeper driver. */
>> +			pmx_buzzer: pmx-buzzer {
>> +				marvell,pins = "mpp44";
>> +				marvell,function = "gpio";
>> +			};
>> +
>> +			pmx_vid_b1: pmx-vid-b1 {
>> +				marvell,pins = "mpp45";
>> +				marvell,function = "gpio";
>> +			};
>> +
>> +			pmx_power_resume_data: pmx-power-resume-data {
>> +				marvell,pins = "mpp47";
>> +				marvell,function = "gpio";
>> +			};
>> +
>> +			pmx_power_resume_clk: pmx-power-resume-clk {
>> +				marvell,pins = "mpp49";
>> +				marvell,function = "gpio";
>> +			};
>> +
>> +			pmx_pwr_sata1: pmx-pwr-sata1 {
>> +				marvell,pins = "mpp47";
>> +				marvell,function = "gpio";
>> +			};
>> +		};
>> +
>> +		/* This board uses the pcf8563 RTC instead of the SoC RTC */
>> +		rtc@10300 {
>> +			status = "disabled";
>> +		};
>> +
>> +		i2c@11000 {
>> +			status = "okay";
>> +
>> +			pcf8563: pcf8563@51 {
>> +				compatible = "nxp,pcf8563";
>> +				reg = <0x51>;
>> +			};
>> +		};
>> +	};
>> +
>> +	regulators {
>> +		compatible = "simple-bus";
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +		pinctrl-0 = <&pmx_pwr_sata1>;
>> +		pinctrl-names = "default";
>> +
>> +		usb0_power: regulator@1 {
>> +			enable-active-high;
>> +		};
>> +
>> +		sata1_power: regulator@2 {
>> +			compatible = "regulator-fixed";
>> +			reg = <2>;
>> +			regulator-name = "SATA1 Power";
>> +			regulator-min-microvolt = <5000000>;
>> +			regulator-max-microvolt = <5000000>;
>> +			regulator-always-on;
>> +			regulator-boot-on;
>> +			enable-active-high;
>> +			gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
>> +		};
>> +	};
>> +
>> +	gpio-leds {
>> +		compatible = "gpio-leds";
>> +		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
>> +			     &pmx_led_usb_green
>> +			     &pmx_led_sys_green &pmx_led_sys_orange
>> +			     &pmx_led_copy_green &pmx_led_copy_red
>> +			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
>> +		pinctrl-names = "default";
>> +
>> +		green-sys {
>> +			label = "nsa325:green:sys";
>> +			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
>> +		};
>> +		orange-sys {
>> +			label = "nsa325:orange:sys";
>> +			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
>> +		};
>> +		green-hdd1 {
>> +			label = "nsa325:green:hdd1";
>> +			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
>> +		};
>> +		red-hdd1 {
>> +			label = "nsa325:red:hdd1";
>> +			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
>> +		};
>> +		green-hdd2 {
>> +			label = "nsa325:green:hdd2";
>> +			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
>> +		};
>> +		red-hdd2 {
>> +			label = "nsa325:red:hdd2";
>> +			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
>> +		};
>> +		green-usb {
>> +			label = "nsa325:green:usb";
>> +			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
>> +		};
>> +		green-copy {
>> +			label = "nsa325:green:copy";
>> +			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
>> +		};
>> +		red-copy {
>> +			label = "nsa325:red:copy";
>> +			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
>> +		};
>> +
>> +	/* The following pins are currently not assigned to a driver,
>> +	   some of them should be configured as inputs.
>> +	pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
>> +		     &pmx_htp &pmx_vid_b1
>> +		     &pmx_power_resume_data &pmx_power_resume_clk>; */
>> +		
>> +	};
>> +
>> +
>> +};
>> +
>> +&mdio {
>> +	status = "okay";
>> +	ethphy0: ethernet-phy@1 {
>> +		reg = <1>;
>> +	};
>> +};
>> +
>> +&eth0 {
>> +	status = "okay";
>> +	ethernet0-port@0 {
>> +		phy-handle = <&ethphy0>;
>> +	};
>> +};
>> +
>> -- 
>> 2.6.0
>>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index bb8fa02..0fcae90 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -193,6 +193,7 @@  dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-ns2mini.dtb \
 	kirkwood-nsa310.dtb \
 	kirkwood-nsa310a.dtb \
+	kirkwood-nsa325.dtb \
 	kirkwood-openblocks_a6.dtb \
 	kirkwood-openblocks_a7.dtb \
 	kirkwood-openrd-base.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/kirkwood-nsa325.dts
new file mode 100644
index 0000000..6e9ffb5
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
@@ -0,0 +1,236 @@ 
+/* Device tree file for the Zyxel NSA 325 NAS box.
+ *
+ * Copyright (c) 2015, Hans Ulli Kroll <ulli.kroll@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Based upon the board setup file created by Peter Schildmann */
+
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
+
+/ {
+	model = "ZyXEL NSA325";
+	compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			pmx_led_hdd2_green: pmx-led-hdd2-green {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd2_red: pmx-led-hdd2-red {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_data: pmx-mcu-data {
+				marvell,pins = "mpp14";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_green: pmx-led-usb-green {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_clk: pmx-mcu-clk {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_act: pmx-mcu-act {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_green: pmx-led-sys-green {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_orange: pmx-led-sys-orange {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_green: pmx-led-hdd1-green {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_red: pmx-led-hdd1-red {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_htp: pmx-htp {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			/* Buzzer needs to be switched at around 1kHz so is
+			   not compatible with the gpio-beeper driver. */
+			pmx_buzzer: pmx-buzzer {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_vid_b1: pmx-vid-b1 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_resume_data: pmx-power-resume-data {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_resume_clk: pmx-power-resume-clk {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+
+			pmx_pwr_sata1: pmx-pwr-sata1 {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+
+		/* This board uses the pcf8563 RTC instead of the SoC RTC */
+		rtc@10300 {
+			status = "disabled";
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			pcf8563: pcf8563@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_pwr_sata1>;
+		pinctrl-names = "default";
+
+		usb0_power: regulator@1 {
+			enable-active-high;
+		};
+
+		sata1_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
+			     &pmx_led_usb_green
+			     &pmx_led_sys_green &pmx_led_sys_orange
+			     &pmx_led_copy_green &pmx_led_copy_red
+			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+		pinctrl-names = "default";
+
+		green-sys {
+			label = "nsa325:green:sys";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+		orange-sys {
+			label = "nsa325:orange:sys";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd1 {
+			label = "nsa325:green:hdd1";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd1 {
+			label = "nsa325:red:hdd1";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd2 {
+			label = "nsa325:green:hdd2";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd2 {
+			label = "nsa325:red:hdd2";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+		green-usb {
+			label = "nsa325:green:usb";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		green-copy {
+			label = "nsa325:green:copy";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+		red-copy {
+			label = "nsa325:red:copy";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+
+	/* The following pins are currently not assigned to a driver,
+	   some of them should be configured as inputs.
+	pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
+		     &pmx_htp &pmx_vid_b1
+		     &pmx_power_resume_data &pmx_power_resume_clk>; */
+		
+	};
+
+
+};
+
+&mdio {
+	status = "okay";
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+