diff mbox

[v3,1/3] arm: dts: phy3250: add lcd and backlight fixed regulators

Message ID 1450727667-16175-2-git-send-email-vz@mleia.com (mailing list archive)
State New, archived
Headers show

Commit Message

Vladimir Zapolskiy Dec. 21, 2015, 7:54 p.m. UTC
Phytec PHY3250 board has GPIO controlled regulators for LCD and
backlight, add their descriptions to board DTS file.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
---
Changes from v2 to v3:
* use "regulator" as a generic device tree node name of fixed regulators,
  thanks to Sergei Shtylyov

Changes from v1 to v2:
* none

 arch/arm/boot/dts/phy3250.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts
index 7d253bb..8ac368f 100644
--- a/arch/arm/boot/dts/phy3250.dts
+++ b/arch/arm/boot/dts/phy3250.dts
@@ -25,6 +25,28 @@ 
 		reg = <0x80000000 0x4000000>;
 	};
 
+	regulators {
+		backlight_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "backlight_reg";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio 5 4 0>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+
+		lcd_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "lcd_reg";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio 5 0 0>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+	};
+
 	ahb {
 		mac: ethernet@31060000 {
 			phy-mode = "rmii";