| Message ID | 1450908016-17384-4-git-send-email-akshay.bhat@timesys.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Dec 23, 2015 at 05:00:12PM -0500, Akshay Bhat wrote: > From: Justin Waters <justin.waters@timesys.com> > > Add support for Advantech BA-16 module based on iMX6D processor > > http://www2.advantech.com/products/medical_computing_system/dms-ba16/mod_64aa1566-169c-483d-97c8-c2c22c163fc3.aspx > Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> > --- > arch/arm/boot/dts/imx6q-ba16.dtsi | 641 ++++++++++++++++++++++++++++++++++++++ > 1 file changed, 641 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6q-ba16.dtsi > > diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi > new file mode 100644 > index 0000000..f130037 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi > @@ -0,0 +1,641 @@ > +/* > + * Support for imx6 based Advantech DMS-BA16 Qseven module > + * > + * Copyright 2015 Timesys Corporation. > + * Copyright 2015 General Electric Company > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This file is distributed in the hope that it will be useful > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +#include "imx6q.dtsi" > +#include <dt-bindings/gpio/gpio.h> > + > +/ { > + memory { > + reg = <0x10000000 0x40000000>; > + }; > + > + clocks { > + clk24m: clk24m { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <24000000>; > + }; How is this clock used on the board? > + }; > + > + backlight_lvds: backlight { > + compatible = "pwm-backlight"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_display>; > + pwms = <&pwm1 0 5000000>; > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > + 10 11 12 13 14 15 16 17 18 19 > + 20 21 22 23 24 25 26 27 28 29 > + 30 31 32 33 34 35 36 37 38 39 > + 40 41 42 43 44 45 46 47 48 49 > + 50 51 52 53 54 55 56 57 58 59 > + 60 61 62 63 64 65 66 67 68 69 > + 70 71 72 73 74 75 76 77 78 79 > + 80 81 82 83 84 85 86 87 88 89 > + 90 91 92 93 94 95 96 97 98 99 > + 100 101 102 103 104 105 106 107 108 109 > + 110 111 112 113 114 115 116 117 118 119 > + 120 121 122 123 124 125 126 127 128 129 > + 130 131 132 133 134 135 136 137 138 139 > + 140 141 142 143 144 145 146 147 148 149 > + 150 151 152 153 154 155 156 157 158 159 > + 160 161 162 163 164 165 166 167 168 169 > + 170 171 172 173 174 175 176 177 178 179 > + 180 181 182 183 184 185 186 187 188 189 > + 190 191 192 193 194 195 196 197 198 199 > + 200 201 202 203 204 205 206 207 208 209 > + 210 211 212 213 214 215 216 217 218 219 > + 220 221 222 223 224 225 226 227 228 229 > + 230 231 232 233 234 235 236 237 238 239 > + 240 241 242 243 244 245 246 247 248 249 > + 250 251 252 253 254 255>; > + default-brightness-level = <255>; > + enable-gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>; > + }; > + > + reg_1p8v: regulator-1p8v { > + compatible = "regulator-fixed"; > + regulator-name = "1P8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + reg_3p3v: regulator-3p3v { > + compatible = "regulator-fixed"; > + regulator-name = "3P3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + reg_lvds: regulator-lvds { > + compatible = "regulator-fixed"; > + regulator-name = "lvds_ppen"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + reg_usb_h1_vbus: regulator-usb_h1_vbus { As a convention, hyphen instead of underscore should be used in node name. I would suggest to simply name it like regulator-usbh1vbus to save additional hyphens. > + compatible = "regulator-fixed"; > + regulator-name = "usb_h1_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > + > + reg_usb_otg_vbus: regulator-usb_otg_vbus { > + compatible = "regulator-fixed"; > + regulator-name = "usb_otg_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > +}; <snip> > +&usdhc2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc2>; > + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; > + no-1-8-v; > + keep-power-in-suspend; > + enable-sdio-wakeup; Since commit 0dbcdc0622ea (mmc: core: enable support for the standard "wakeup-source" property), enable-sdio-wakeup becomes a legacy property. Please use the new standard one. Shawn > + status = "okay"; > +}; > + > +&usdhc3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>; > + bus-width = <8>; > + vmmc-supply = <&vdd_bperi>; > + vqmmc-supply = <&vdd_bio>; > + non-removable; > + keep-power-in-suspend; > + status = "okay"; > +}; > + > +&wdog1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdog>; > +}; > + > +&iomuxc { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hog>; > + > + pinctrl_audmux: audmuxgrp { > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 > + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 > + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 > + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 > + >; > + }; > + > + pinctrl_display: dispgrp { > + fsl,pins = < > + /* BLEN_OUT */ > + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 > + /* LVDS_PPEN_OUT */ > + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 > + >; > + }; > + > + pinctrl_ecspi1: ecspi1grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 > + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 > + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 > + /* SPI1 CS */ > + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 > + >; > + }; > + > + pinctrl_ecspi5: ecspi5grp { > + fsl,pins = < > + MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b0b0 > + MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x1b0b0 > + MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x1b0b0 > + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 > + >; > + }; > + > + pinctrl_enet: enetgrp { > + fsl,pins = < > + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 > + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 > + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 > + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 > + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 > + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 > + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 > + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 > + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 > + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 > + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 > + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 > + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 > + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 > + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 > + /* FEC Reset */ > + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 > + /* AR8033 Interrupt */ > + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 > + >; > + }; > + > + pinctrl_hog: hoggrp { > + fsl,pins = < > + /* GPIO 0-7 */ > + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 > + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 > + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 > + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 > + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 > + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b0 > + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 > + MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x1b0b0 > + /* SUS_S3_OUT to CPLD */ > + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 > + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 > + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 > + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_pcie: pciegrp { > + fsl,pins = < > + /* PCIe Reset */ > + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 > + /* PCIe Wake */ > + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 > + >; > + }; > + > + pinctrl_pmic: pmicgrp { > + fsl,pins = < > + /* PMIC Interrupt */ > + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 > + >; > + }; > + > + pinctrl_pwm1: pwm1grp { > + fsl,pins = < > + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_pwm2: pwm2grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_rtc: rtcgrp { > + fsl,pins = < > + /* RTC_INT */ > + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 > + >; > + }; > + > + pinctrl_uart3: uart3grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 > + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 > + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 > + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 > + >; > + }; > + > + pinctrl_uart4: uart4grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 > + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_usbhub: usbhubgrp { > + fsl,pins = < > + /* HUB_RESET */ > + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0 > + >; > + }; > + > + pinctrl_usbotg: usbotggrp { > + fsl,pins = < > + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 > + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 > + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 > + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 > + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 > + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 > + /* uSDHC2 CD */ > + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 > + >; > + }; > + > + pinctrl_usdhc3_reset: usdhc3grp-reset { > + fsl,pins = < > + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170F9 > + >; > + }; > + > + pinctrl_usdhc4: usdhc4grp { > + fsl,pins = < > + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 > + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059 > + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 > + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 > + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 > + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 > + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 > + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 > + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 > + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 > + /* uSDHC4 CD */ > + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0 > + /* uSDHC4 SDIO PWR */ > + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 > + /* uSDHC4 SDIO WP */ > + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 > + /* uSDHC4 SDIO LED */ > + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 > + >; > + }; > + > + pinctrl_wdog: wdoggrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0 > + >; > + }; > +}; > -- > 2.6.3 > >
On 01/28/2016 12:41 AM, Shawn Guo wrote: > On Wed, Dec 23, 2015 at 05:00:12PM -0500, Akshay Bhat wrote: >> From: Justin Waters <justin.waters@timesys.com> >> >> Add support for Advantech BA-16 module based on iMX6D processor >> >> http://www2.advantech.com/products/medical_computing_system/dms-ba16/mod_64aa1566-169c-483d-97c8-c2c22c163fc3.aspx >> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> >> --- >> arch/arm/boot/dts/imx6q-ba16.dtsi | 641 ++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 641 insertions(+) >> create mode 100644 arch/arm/boot/dts/imx6q-ba16.dtsi >> >> diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi >> new file mode 100644 >> index 0000000..f130037 >> --- /dev/null >> +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi >> @@ -0,0 +1,641 @@ >> +/* >> + * Support for imx6 based Advantech DMS-BA16 Qseven module >> + * >> + * Copyright 2015 Timesys Corporation. >> + * Copyright 2015 General Electric Company >> + * >> + * This file is dual-licensed: you can use it either under the terms >> + * of the GPL or the X11 license, at your option. Note that this dual >> + * licensing only applies to this file, and not this project as a >> + * whole. >> + * >> + * a) This file is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License >> + * version 2 as published by the Free Software Foundation. >> + * >> + * This file is distributed in the hope that it will be useful >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * Or, alternatively >> + * >> + * b) Permission is hereby granted, free of charge, to any person >> + * obtaining a copy of this software and associated documentation >> + * files (the "Software"), to deal in the Software without >> + * restriction, including without limitation the rights to use >> + * copy, modify, merge, publish, distribute, sublicense, and/or >> + * sell copies of the Software, and to permit persons to whom the >> + * Software is furnished to do so, subject to the following >> + * conditions: >> + * >> + * The above copyright notice and this permission notice shall be >> + * included in all copies or substantial portions of the Software. >> + * >> + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND >> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES >> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND >> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT >> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY >> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR >> + * OTHER DEALINGS IN THE SOFTWARE. >> + */ >> + >> +#include "imx6q.dtsi" >> +#include <dt-bindings/gpio/gpio.h> >> + >> +/ { >> + memory { >> + reg = <0x10000000 0x40000000>; >> + }; >> + >> + clocks { >> + clk24m: clk24m { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <24000000>; >> + }; > > How is this clock used on the board? > Was a leftover, will remove it in the next rev. >> + }; >> + >> + backlight_lvds: backlight { >> + compatible = "pwm-backlight"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_display>; >> + pwms = <&pwm1 0 5000000>; >> + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 >> + 10 11 12 13 14 15 16 17 18 19 >> + 20 21 22 23 24 25 26 27 28 29 >> + 30 31 32 33 34 35 36 37 38 39 >> + 40 41 42 43 44 45 46 47 48 49 >> + 50 51 52 53 54 55 56 57 58 59 >> + 60 61 62 63 64 65 66 67 68 69 >> + 70 71 72 73 74 75 76 77 78 79 >> + 80 81 82 83 84 85 86 87 88 89 >> + 90 91 92 93 94 95 96 97 98 99 >> + 100 101 102 103 104 105 106 107 108 109 >> + 110 111 112 113 114 115 116 117 118 119 >> + 120 121 122 123 124 125 126 127 128 129 >> + 130 131 132 133 134 135 136 137 138 139 >> + 140 141 142 143 144 145 146 147 148 149 >> + 150 151 152 153 154 155 156 157 158 159 >> + 160 161 162 163 164 165 166 167 168 169 >> + 170 171 172 173 174 175 176 177 178 179 >> + 180 181 182 183 184 185 186 187 188 189 >> + 190 191 192 193 194 195 196 197 198 199 >> + 200 201 202 203 204 205 206 207 208 209 >> + 210 211 212 213 214 215 216 217 218 219 >> + 220 221 222 223 224 225 226 227 228 229 >> + 230 231 232 233 234 235 236 237 238 239 >> + 240 241 242 243 244 245 246 247 248 249 >> + 250 251 252 253 254 255>; >> + default-brightness-level = <255>; >> + enable-gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>; >> + }; >> + >> + reg_1p8v: regulator-1p8v { >> + compatible = "regulator-fixed"; >> + regulator-name = "1P8V"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + }; >> + >> + reg_3p3v: regulator-3p3v { >> + compatible = "regulator-fixed"; >> + regulator-name = "3P3V"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-always-on; >> + }; >> + >> + reg_lvds: regulator-lvds { >> + compatible = "regulator-fixed"; >> + regulator-name = "lvds_ppen"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-boot-on; >> + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; >> + enable-active-high; >> + }; >> + >> + reg_usb_h1_vbus: regulator-usb_h1_vbus { > > As a convention, hyphen instead of underscore should be used in node > name. I would suggest to simply name it like regulator-usbh1vbus to > save additional hyphens. > Thanks, was not aware of the convention. Will fix this for all nodes/patches. >> + compatible = "regulator-fixed"; >> + regulator-name = "usb_h1_vbus"; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + }; >> + >> + reg_usb_otg_vbus: regulator-usb_otg_vbus { >> + compatible = "regulator-fixed"; >> + regulator-name = "usb_otg_vbus"; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + }; >> +}; > > <snip> > >> +&usdhc2 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_usdhc2>; >> + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; >> + no-1-8-v; >> + keep-power-in-suspend; >> + enable-sdio-wakeup; > > Since commit 0dbcdc0622ea (mmc: core: enable support for the standard > "wakeup-source" property), enable-sdio-wakeup becomes a legacy property. > Please use the new standard one. > > Shawn > Will fix this.
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi new file mode 100644 index 0000000..f130037 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -0,0 +1,641 @@ +/* + * Support for imx6 based Advantech DMS-BA16 Qseven module + * + * Copyright 2015 Timesys Corporation. + * Copyright 2015 General Electric Company + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx6q.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + memory { + reg = <0x10000000 0x40000000>; + }; + + clocks { + clk24m: clk24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + }; + + backlight_lvds: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_display>; + pwms = <&pwm1 0 5000000>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100 101 102 103 104 105 106 107 108 109 + 110 111 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 128 129 + 130 131 132 133 134 135 136 137 138 139 + 140 141 142 143 144 145 146 147 148 149 + 150 151 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 168 169 + 170 171 172 173 174 175 176 177 178 179 + 180 181 182 183 184 185 186 187 188 189 + 190 191 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 208 209 + 210 211 212 213 214 215 216 217 218 219 + 220 221 222 223 224 225 226 227 228 229 + 230 231 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 248 249 + 250 251 252 253 254 255>; + default-brightness-level = <255>; + enable-gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_lvds: regulator-lvds { + compatible = "regulator-fixed"; + regulator-name = "lvds_ppen"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_h1_vbus: regulator-usb_h1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_otg_vbus: regulator-usb_otg_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: n25q032@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0xc0000>; + }; + + partition@c0000 { + label = "env"; + reg = <0xc0000 0x10000>; + }; + + partition@d0000 { + label = "spare"; + reg = <0xd0000 0x130000>; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio7>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + + onkey { + compatible = "dlg,da9063-onkey"; + }; + + regulators { + vdd_bcore1: bcore1 { + regulator-min-microvolt = <1420000>; + regulator-max-microvolt = <1420000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_bcore2: bcore2 { + regulator-min-microvolt = <1420000>; + regulator-max-microvolt = <1420000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_bpro: bpro { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_bmem: bmem { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_bio: bio { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_bperi: bperi { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_ldo1: ldo1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1860000>; + }; + + vdd_ldo2: ldo2 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1860000>; + }; + + vdd_ldo3: ldo3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3440000>; + }; + + vdd_ldo4: ldo4 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3440000>; + }; + + vdd_ldo5: ldo5 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + }; + + vdd_ldo6: ldo6 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + }; + + vdd_ldo7: ldo7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + }; + + vdd_ldo8: ldo8 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + }; + + vdd_ldo9: ldo9 { + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <3600000>; + }; + + vdd_ldo10: ldo10 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + }; + + vdd_ldo11: ldo11 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + + rtc@32 { + compatible = "epson,rx8010"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + reg = <0x32>; + interrupt-parent = <&gpio4>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-master"; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhub>; + vbus-supply = <®_usb_h1_vbus>; + reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + enable-sdio-wakeup; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>; + bus-width = <8>; + vmmc-supply = <&vdd_bperi>; + vqmmc-supply = <&vdd_bio>; + non-removable; + keep-power-in-suspend; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 + >; + }; + + pinctrl_display: dispgrp { + fsl,pins = < + /* BLEN_OUT */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + /* LVDS_PPEN_OUT */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + /* SPI1 CS */ + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + >; + }; + + pinctrl_ecspi5: ecspi5grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b0b0 + MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x1b0b0 + MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x1b0b0 + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* FEC Reset */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + /* AR8033 Interrupt */ + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* GPIO 0-7 */ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b0 + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 + MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x1b0b0 + /* SUS_S3_OUT to CPLD */ + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + /* PCIe Reset */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + /* PCIe Wake */ + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + /* PMIC Interrupt */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + /* RTC_INT */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbhub: usbhubgrp { + fsl,pins = < + /* HUB_RESET */ + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + /* uSDHC2 CD */ + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; + + pinctrl_usdhc3_reset: usdhc3grp-reset { + fsl,pins = < + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170F9 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + /* uSDHC4 CD */ + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0 + /* uSDHC4 SDIO PWR */ + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 + /* uSDHC4 SDIO WP */ + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 + /* uSDHC4 SDIO LED */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0 + >; + }; +};