@@ -147,6 +147,37 @@
};
};
+ lcdc_mmu: iommu@10118300 {
+ compatible = "rockchip,iommu";
+ reg = <0x10118300 0x100>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "lcdc_mmu";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ lcdc: lcdc@10118000 {
+ compatible = "rockchip,rk3036-lcdc";
+ reg = <0x10118000 0x19c>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&lcdc_mmu>;
+
+ status = "disabled";
+
+ lcdc_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ lcdc_out_hdmi: endpoint@0 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_lcdc>;
+ };
+ };
+ };
+
gic: interrupt-controller@10139000 {
compatible = "arm,gic-400";
interrupt-controller;
@@ -274,6 +305,27 @@
status = "disabled";
};
+ hdmi: hdmi@20034000 {
+ compatible = "rockchip,rk3036-inno-hdmi";
+ reg = <0x20034000 0x4000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMI>;
+ clock-names = "pclk";
+ rockchip,grf = <&grf>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_ctl>;
+ status = "disabled";
+
+ hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hdmi_in_lcdc: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&lcdc_out_hdmi>;
+ };
+ };
+ };
+
timer: timer@20044000 {
compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";
reg = <0x20044000 0x20>;
@@ -556,6 +608,15 @@
};
};
+ hdmi {
+ hdmi_ctl: hdmi-ctl {
+ rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>,
+ <1 9 RK_FUNC_1 &pcfg_pull_none>,
+ <1 10 RK_FUNC_1 &pcfg_pull_none>,
+ <1 11 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
The rk3036 support two overlay plane and one hwc plane, it support IOMMU, and its IOMMU same as rk3288's. Meanwhile, add the inno hdmi for HDMI display. Signed-off-by: Caesar Wang <wxt@rock-chips.com> --- Changes in v2: None arch/arm/boot/dts/rk3036.dtsi | 61 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+)