@@ -74,3 +74,26 @@
&uart2 {
status = "okay";
};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
+ phy = <&phy0>;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&pinctrl {
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ emac {
+ rmii_rst: rmii-rst {
+ rockchip,pins = <2 22 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+};
@@ -285,7 +285,22 @@
status = "okay";
};
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
+ phy = <&phy0>;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
&pinctrl {
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
pmic {
pmic_int: pmic-int {
rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>;
@@ -297,4 +312,10 @@
rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>;
};
};
+
+ emac {
+ rmii_rst: rmii-rst {
+ rockchip,pins = <2 22 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
};
@@ -186,6 +186,20 @@
status = "disabled";
};
+ emac: ethernet@10200000 {
+ compatible = "rockchip,rk3036-emac", "snps,arc-emac";
+ reg = <0x10200000 0x4000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rockchip,grf = <&grf>;
+ clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
+ clock-names = "hclk", "macref", "macclk";
+ max-speed = <100>;
+ phy-mode = "rmii";
+ status = "disabled";
+ };
+
sdmmc: dwmmc@10214000 {
compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x10214000 0x4000>;
@@ -556,6 +570,24 @@
};
};
+ emac {
+ emac_xfer: emac-xfer {
+ rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_default>, /* crs_dvalid */
+ <2 13 RK_FUNC_1 &pcfg_pull_default>, /* tx_en */
+ <2 14 RK_FUNC_1 &pcfg_pull_default>, /* mac_clk */
+ <2 15 RK_FUNC_1 &pcfg_pull_default>, /* rx_err */
+ <2 16 RK_FUNC_1 &pcfg_pull_default>, /* rxd1 */
+ <2 17 RK_FUNC_1 &pcfg_pull_default>, /* rxd0 */
+ <2 18 RK_FUNC_1 &pcfg_pull_default>, /* txd1 */
+ <2 19 RK_FUNC_1 &pcfg_pull_default>; /* txd0 */
+ };
+
+ emac_mdio: emac-mdio {
+ rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_default>, /* mac_md */
+ <2 25 RK_FUNC_1 &pcfg_pull_default>; /* mac_mdclk */
+ };
+ };
+
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
This patch describe the emac, and we need to let mac clock under the APLL which is able to provide the accurate 50MHz what mac_ref need. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> --- arch/arm/boot/dts/rk3036-evb.dts | 23 +++++++++++++++++++++++ arch/arm/boot/dts/rk3036-kylin.dts | 21 +++++++++++++++++++++ arch/arm/boot/dts/rk3036.dtsi | 32 ++++++++++++++++++++++++++++++++ 3 files changed, 76 insertions(+)